P162G100QRC30B103 TT Electronics

17 mm Single Gang Potentiometer with Rotary Switch P162 Series Features: Resistance range 1 k to 1 M Temperature range -10C to +70C Rotational cycles of 15,000 minimum Switch option Vertical only mount versions RoHS compliant 3D Model Description: 17mm rotary single gang potentiometer with rotary switch. Options i nclude metal Use this bounding box shaft aud io and linear tapers metal to place and size the 3D bushing knurled or plain shaft types. content. Cover this box entirely. If there is no 3D content for this Applications: product, delete the box. Electric guitars Amplifiers Mixers Drum machines Synthesizers Electrical Characteristics T = 25C unless otherwise noted A Resistance Range 1 k to 1 M Standard Resistance Tolerance 500 <R<1 M 2 0% R500 or R1 M 30% Residual Resistance Term. 1~2: Less than 20 Term: 2~3: Less than 20 Resistance Taper A, B, C, D Maximum Operating Voltage Linear Taper B: 200 Vac Other Tapers: 150 Vac Rated Power Linear Taper B: 0.2 W Audio: 0.1 W Dielectric Strength 1 minute at 500 Vac Rotational Noise Less than 100 mV Insulation Resistance More than 100 M at 500 Vdc Gang Error (Dual Unit) N/A TT Electronics BI Technologies General Note Circulo de la Amistad 102 PIMSA IV Mexicali B.C. Mexico C.P 21210 TT Electronics reserves the right to make changes in product specificaoti n without Ph: + 1 (714) 447-2345 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com/bi -technologies considered accurate at time of going to print. Rev - 06/2019 Page 1 TT electronics plc Document No.:: 17 mm Single Gang Potentiometer with Rotary Switch P162 Series Switch Characteristics T = 25C unless otherwise noted A Switch Circuit SPST Contact Resistance Less than 50 m Rated Power Single Unit: 1.0 A at 12V ac/dc Rotational Angle 35 10 Rotational Strength 70~250 gf.cm. Switch Life 15,000 cycles Mechanical Characteristics T = 25C unless otherwise noted A Mechanical Travel 300 5 Rotational Torque 20 gf.cm~100 gf.cm Rotational Stop Strength 7 kgf.cm minimum Shaft Torque Strength 8 kgf minimum Detent Torque 100~300 gf.cm Nut Tightening Strength 8 kgf.cm minimum Rotational Life 100,000 cycles minimum Environmental Characteristics T = 25C unless otherwise noted A Operating Temperature -10 C to +70 C IP Rating IP 40 Wave Soldering 260 C maximum for 1-3 seconds Soldering Condition Hand Soldering 300 C maximum for 3 seconds RoHS Please refer to TT Electronics website REACH Please refer to TT Electronics website TT Electronics BI Technologies General Note Circulo de la Amistad 102 PIMSA IV Mexicali B.C. Mexico C.P 21210 TT Electronics reserves the right to make changes in product specificaoti n without Ph: + 1 (714) 447-2345 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com/bi -technologies considered accurate at time of going to print. Rev - 06/2019 Page 2 TT electronics plc Document No.: