Features:
No load power consumption less than 0.075W
Compliant with DoE level VI requirements
Meets energy star EPS2.0/ErP lot 7
Meets EU CoC EPS V5 Tier2
Operating altitude up to 5000 meters
Overvoltage protection (auto -recovery)
Short-circuit protection (auto -recovery)
Overcurrent protection (auto -recovery)
High Efficiency
100% burn-in at full rated load
Compliant with RoHS requirements
Meets LPS requirements
Description:
The PUP15/25N3 series of AC-DC switching power supplies are for 15-25 watts of continuous output power. They are
enclosed in a 94V-0 rated plastic case with an IEC320/C14 inlet to mate with interchangeable cord for world -wide use. All
models meet EN55032, EN55024 and FCC class B emission limits and comply with UL, CSA, IEC and CE requirements.
Average
Ripple &
Part Number Output Voltage Min. Current Max. Current Tolerance Wattage Efficiency
Noise
@115/230 Vac
PUP15N3-10 5V 0A 3.00A 5% 150mV 15W 83/83%
PUP25N3-12 12V 0A 2.08A 5% 180mV 25W 87/88%
PUP25N3-13-2 19V 0A 1.32A 5% 300mV 25W 88/89%
PUP25N3-14 24V 0A 1.04A 5% 300mV 25W 89/89%
NOTES:
1. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and
output load ranges, and with a 47 F electrolytic capacitor in parallel with a 0.1 F ceramic capacitor across the output.
TT Electronics | Power Partners, Inc
General Note
All data sheets are subject to change without nocti e. 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600
SL-xxx-xxx ISS.7 25/10/2019 Page: 1
TT Electronics plc
Specicfi ations
Safety Standards & EMC Specicfi ations
UL 62368-1 File No. E190414
Safety Standard Approvals CSA C22.2 No. 62368-1
TV EN 62368-1
EMI Standard EN55032, FCC, and VCCI Class B (radiated and conducted)
EN61000-3-2: Harmonic distortion, Class A and D
EN61000-3-3: Line flicker
EN55024
EN61000-4-2: ESD, 8 KV air and 4 KV contact
EN61000-4-3: Radiated immunity, 3V/m
EMC Performance EN61000-4-4: Fast transient/burst, 1 KV
EN61000-4-5: Surge, 1 KV diff., 2 KV com.
EN61000-4-6: Conducted immunity, 3Vrms
EN61000-4-8: Magnetic field immunity, 1A/m
EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms,
and >95% reduction for 10ms
Input Specicfi ations
Input Voltage Range 90 to 264 Vdc
Input Frequency Range 47 to 63Hz
Input Current 0.8A (rms) for 115 VAC or 0.45A (rms) for 230 VAC Maximum
Earth Leakage Current 250A max. @ 264 VAC, 60Hz
Output Specifications
Output Connection Type 2.5mm ID x 5.5mm OD x 12mm L, Center Positive, RA Barrel
Over Voltage Protection Set at 115200% of its nominal output voltage
Over Current Protection Protect to short circuit conditions
Temperature Coefficient All outputs 0.04%/C maximum
Maximum excursion of 4% or better on all models, recovering to 1%
Transient Response
of final value within 500 s after a 25% step load change
Environmental Specifications
Operating Temperature 0C +40C (41C to 60C with derating)
Storage Temperature -20C 80C
Operating Humidity 20% to 80% non-condensing
Storage Humidity 10% to 90% non-condensing
General Specifications
Hold-up Time 8ms minimum at 115 VAC
Turn on Delay Time 3s maximum at 115 VAC
Line Regulation 0.5% maximum at full load
Inrush Current 30A @ 115 Vac or 60A @ 230 Vac at 25C cold start
Withstand Voltage 4242 VDC input to output, 2500 VDC input to ground
MTBF 100,000 hours at full load at 25C ambient, calculated per SR332
TT Electronics | Power Partners, Inc
General Note
All data sheets are subject to change without nocti e. 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600
SL-xxx-xxx ISS.7 25/10/2019 Page: 2
TT Electronics plc