Metal Strip Current Sense Resistors Metal Element Welwyn Components Resistors Surface Mount Resistors Current Sense Resistor Metal ElemeMetal Strip Curnt rent Sense Resistors Metal Element Welwyn Components ULR Series Resistors Surface Mount ULR Series Current Sense Resistor Metal Element Current Sense Resistor Current Sense Resistor Metal Element Resistance R0005 (0.5m ) to R015 (15m ) Robust metal strip able to withstand high ULR Series Metal Strip Current Sense Resistors Surface Mount Low TCR, Low inductance ULR Series temperature and high current. ULR Series Curren t Sense Designed for current sensing in power electResistor ronic systems ULR Series Robust metal strip able to withstand high Low TCR and Inductance Solid metal element withstands high current surges Resistance R0005 (0.5m ) to R015 (15m ) Robust metal strip able to withstand high Welwyn Components Resistance Range from 0.5 m to 22 m temperature and high current. ULR Series Robust metal strip able to withstand high ULR Series Metal Strip Current Sense Resistors Surface Mount RoHS compliantLow TCR, Low inductance temperature and high current. temperatuRoHS compliantre and high current. Low TCR and Inductance AEC-Q200 QualiedDesigned for current sensing in power electronic systems LoRobuw TsCR and Inductt metal strip able anceto withstand high AEC-Q200Low TCR and Inductance Resis tRanancege from 0.15 m to 22 m Construction Solid metal element withstands high current surges Welwyn Components Higher wattage devices feature PCB clearance gap to RResistance Range ftempeesistanceratu rRange and high cure fromrom 0.5 m 0.15mrent. t to 22 mo 10m ULR Series B laRcoHS k coacompliat nt RoHS compliant maximize thermal performance RRoHS compliantLooHSw T cCR and Inducompliant tance A low TCR resistance alloy plate, with tin plated connection bands is protectively coated on the upper and lower AEC-Q200 Qualied AEC-Q200 fa ceAEC-Q200s and numerically marked with the resistance value. This part is suitable for wave or reflow soldering. Electrical Data AEC-Q200Resis tRanancege from 0.15 m to 22 m Construction Higher devices feature PCB clearance gap to Higher wattage devices feature PCB clearance gap to HigherRmoHS aximic ompliawze thermal peraagtt e ndet vices fformanceeature PCB clearance gap to All parts are Pb-free and comply with EU 2011/65/EU (RoHS2) BGlraeceknccooaatt ULR1S ULR1 ULR15S ULR2 ULR25 ULR3 maximize thermal performance maximize thermal performance A low TCR resistance alloy plate, with tin plated connection bands is protectively coated on the upper and lower A low TCR resistance alloy plate is grooved to set the final resistance, the lower faces are tin plated for AEC-Q200Footprint size 1206 2512 2010 2512 2512 2512 faces and numeElectrical Datarically marked with the resistance value. This part is suitable for wave or reflow soldering. connections, and it is protectively coated on the upper and lower faces and numerically marked with the resistance Power rating at 80C watts 1.0 1.0 1.5 2.0 2.5 3.0 Higher devices feature PCB clearance gap to Electrical Data value. This part is ONLY suitable for reflow soldering. maximize thermal performance All parts are Pb-free and comply with EU 2011/65/EU (RoHS2) R0005 R0005 R004 R0005 Green coat 1 AllAll partsparts araree Pb-Pb-frfreeee andand ccomplyomply withwith EUEU DirDirectivectivee 2011/65/EU2011/65/EU amendedamended bbyy (EU)(EU) 2015/8632015/863 (R(RoHS3)oHS3) Resistance range ohms R0006 to R01ULR1S ULR1 R001 to R01ULR15S ULR2 ULR25 ULR3 to R015 to R01Dielectric to R006 to R003 Power Dielectric Ambient A low TCR resistance alloy plate is grooved to set the final resistance, the lower faces are tin plated for Power Rating Standard Resistance Values TCR Tolerance Ambient Standard Resistance TCR Tolerance Uncoated Footprint size 1206 2512 2010 2512 2512 2512 TypeType Size SizeCoatingCoating Rating Withstanding Withstanding Temperature 1 1 Isolation voltage volts N/A 200V N/A 200V 200V 200V Value m (ppm/C) (%) 80C (W) (m) (ppm/C) (%) Temperature (C) connections, and it is protectively coated on the upper and lower faces and numerically marked with the resistance A low TCR resistance alloy plate is 80C (W)grooved to set the final resistance and the lower face only iVsoltage (V)protected wit(C)h an Power rating at 80C watts 1.0 1.0 1.5 2.0Voltage (V) 2.5 3.0 50, 75,100, Electrical Data value. This part is ONLY suitable for reflow soldering. ULRG1 / 0.2, 0.25, 0.3, 0.4, 0.5, 0.6 200 50, 100 Electrical Data epULRG1 / oxy coating. The lower faces are tin plated0.5, 0.6, 0.75, 1, 2, 3, 4, 5, 6, for connections. This part is ONLY suitable for reflow soldering. R0005 R0005 R004 R0005 1206 1 150 1 1206 1 Resistance range ohms 0.75, 1, 1.2, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10R0006 to R01 R001 to R01 ULR1S TCR ppm/C 50 5050 50 N/A 50 See table ULR1S 7, 8, 9, 10 See tableto R015 to R01Dielectric to R006 to R003 2 Power Dielectric Ambient None N/A below Power Rating Standard Resistance Standard ResistanceValues TCR TCR Tolerance Tolerance Ambient UncoULRG15 /ated 0.2, 0.25, 0.3, 0.4, 0.5 150 TypeType Size SizeCoatingCoating Rating below Withstanding Withstanding Temperature MarkinULRG15 / g 2010 1.5 0.5, 0.75, 1, 2, 3, 4, 5, 6, 1 Isolation voltage volts N/A 1 200V N/A 200V 200V 200V 80C (W) (m) Value m (ppm/C)(ppm/C) (%)(%) Temperature (C) ULR15S 2010 1.5 0.75, 1, 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8, 9, 10 A low TCR resistance alloy plate is 80C (W)grooved to set the final resistance and the lower face only iVsoltage (V)protected wit(C)h an 7, 8, 9, 10 Voltage (V) ULR15S Resistance tolerance % 1(F), 5(J) Only 2512 size parts are marked. For values which are integer numbers of milliohms, the marking is 4-character ULR1 50, 75,100, ULRG2 / Green 0.2, 0.25, 0.3, 0.4, 0.5, 0.6 200 ULRG1 / 2 50, 100 epULRG1 / oxy coating. The lower faces are tin plated for conn6.5, 7, 7.5, 8, 9, 10ections. This part is ONLY suitable for reflow soldering. ULRG1 / 2 0.5, 0.6, 0.75, 1, 2, 3, 4, 5, 6, ULRG2 / Protective coating None Black/Green 50None Black/Green Green Green 1206 1 150 IEC62 code e.g. R002 Undersidefor 2m , 1R010 for 1101, 12, 13, 14, 15, 22m . For values including frac50tions of a milliohm the marking is 3 or ULR2 1206 1 ULR1S TCR ppm/C2 0.75, 1, 1.2, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 106.5, 7, 8, 9, 1050 50 50 50 See table 50 N/A ULR1S 7, 8, 9, 10 ULR2 2 See table Standard values See table below for available values ULRG25 / None , 1M50 for 1.5mN/A. 4-character code using M to indicate the decimal point, e.g. M75 for 0.75m below 0.2, 0.25, 0.3, 0.4, 0.5 150 ULRG15 / 2.5 3.5, 4, 4.5, 5, 5.5, 6 ULRG25 / Green below MarkinULRG15 / g 0.5, 0.75, 1, 2, 3, 4, 5, 6, 1, 5 -55 to +170 2010 1.5 ULR25ULR25 2.5 3.5, 4, 4.5, 5, 5.5, 6 ULR15S 2010Ambient temperature range C1.5 0.5, 0.75 100 -55 to +170 3 0.75, 1, 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8, 9, 10 ULRG3 / 7, 8, 9, 10 ULR15S Resistance tolerance % 1(F), 5(J) ULR3 Only 2512 size parts are marked. For values wh0.15, 0.25, 0.3, 0.4, 0.5, 0.75ich are integer numbers of150milliohms, the marking is 4-character ULR1ULRG3 / 1, 1.5, 2, 2.5, 3 50 1, 5 -55 to +170 2512 200 Green ULRG2 / Note 1: For values above 0R015 r3efer to our LR / LRF Series ULRG1 / 2 2 0.5, 0.75, 1, 1.5, 26.5, 7, 7.5, 8, 9, 10 50 ULRG2 / ULR3 Protective coating 2512 None Black/Green 50None Black/Green Green Green 1, 1.5, 2, 2.5, 3 50 IEC62 code e.g. R002 for 2m , R010 for 10m . For values including frac50tions of a milliohm the marking is 3 or ULR2 Underside 1 11, 12, 13, 14, 15, 22 Note 2: Colour of coating relates to solder process suitability, see Construction 2 6.5, 7, 8, 9, 10 200 ULR2 0.5, 0.75, 1, 1.5, 2 50 Standard values 2.5, 3, 3.5 See table below for available values150 ULRB1 / 4-chaULRG25 /racter code using M to indicate the decimal point, e.g. M75 for 0.75m , 1M50 for 1.5m . ULRG25 / 1 2.5 3.5, 4, 4.5, 5, 5.5, 6 Green 1, 5 -55 to +170 2.5, 3, 3.5 150 Standard values available (non-standard values may be available to order - consult factory ULR25ULR25 ULR1 2.5 3.5, 4, 4.5, 5, 5.5, 6 ULRB1 / ULR1 Ambient temperature range C 1 4, 4.5, 5, 5.5, 100.5, 0.75 100100 -55 to +170 3 ULRG3 / Black 4, 4.5, 5, 5.5, 10 100 ULR3 Black ULRG3 / 0.15, 0.25, 0.3, 0.4, 0.5, 0.751, 1.5, 2, 2.5, 3 50 150 ULR1S ULR1 ULR15S ULR2 1, 5 ULR25 -55 to +170ULR3 2512 200 Note 1: For values above 0R015 r3efer to our LR / LRF Series Value 6, 6.5, 7, 7.5 75 0.5, 0.75, 1, 1.5, 26, 6.5, 7, 7.5 50 75 2512 ULR3 1, 1.5, 2, 2.5, 3 50 Coat TCR Coat TCR Coat TCR Coat TCR Coat TCR Coat TCR Note 2: Colour of coating relates to solder process suitability, see Construction 200 ULRB2 / 0.5, 0.75, 1, 1.5, 2 50 ULRB2 / 0.5, 0.75, 1, 1.5, 2 50 R0005 2 Black 502.5, 3, 3.5 150Black 50 Green 100 ULRB1 / 2 0.5, 0.75, 1, 1.5, 2 50 ULR2 2.5, 3 150 ULR2 1 2.5, 3, 3.5 150 StandaR0006 rd values availableNone 50 (non-standard values may be available to order - consult factory ULR1 4, 4.5, 5, 5.5, 10 100 ULRB1 / ULR1 1 Black Sn Plated Finish 4, 4.5, 5, 5.5, 10 100 R00075 Black 50 Black 50 Green 100 Black ULR1S ULR1 ULR15S ULR2 ULR25 ULR3 Value 6, 6.5, 7, 7.5 75 6, 6.5, 7, 7.5 75 Green Coat & Uncoated BlacR001k None 50 Black 50 None 50 Black 50 Green 50 Coat TCR Coat TCR Coat TCR Coat TCR Coat TCR Coat TCR ULRB2 / 0.5, 0.75, 1, 1.5, 2 50 ULRB2 / R0015 Black 50 Black 50 Green 50 R0005 Black 50 Black 50 Green 100 2 2 0.5, 0.75, 1, 1.5, 2 50 ULR2 2.5, 3 150 ULR2 R002 None 50 Black 50 None 50 Black 50 Green 50 Termination DetR0006ails: None 50 Notes: 1. For higher resistance values please refer to LRMA series. Sn Plated Finish R0025 Black 150 R00075 Black 50 Black 50 Green 100 Material Matt tin plated finish over a barrier layer Notes: 1. For higher resistance values please refer to LRMA series. 2. Package sizes 1206 and 2010 are uncoated on the top surface and unmarked. R003 None 50 Black 150 None 50 Green 50 Green Coat & Uncoated R001 None 50 Black 50 None 50 Black 50 Green 50 Black Solderability 95% min coverage (MIL-STD 202F / 208H, 235C 2 secs) R004 None 50 Black 100 None 50 Green 50 R0015 Black 50 Black 50 Green 50 R0045 Green 50 Performance Data R002 None 50 Black 50 None 50 Black 50 Green 50 Termination Details: R005 None 50 Black 100 None 50 Green 50 R0025 Black 150 Material Matt tin plated finish over a barrier layer AEC-Q200 TaR006ble 7 None 50 Black 75 None 50 Green 50 Max. (add R0005) Notes: 1. For higher resistance values please refer to LRMA series. 2. Package sizes 1206 and 2010 are uncoated on the top surface and unmarked. R003 None 50 Black 150 None 50 Green 50 Solderability 95% min coverage (MIL-STD 202F / 208H, 235C 2 secs) R0065 Black 75 Green 50 ref. R004 None 50 Black M100ethodNone 50 Green 50 1206, 2010 Green Underside R007TestNone 50 Black 75 None 50 Green 50 R0045 & Black 2512 Green 251250 Performance Data R008 None 50 None 50 Green 50 R005 None 50 Black 100 None 50 Green 50 3 High Temp. Exposure * MIL-STD-202 Method 108 1 1 R009 None 50 None 50 Green 50 AEC-Q200 TaR006ble 7 None 50 Black 75 None 50 Max. (add GRr0een005) 50 4 R01TemperaNoneture Cyc50ling BlackJESD22 100MethodNone JA-104 50 Gr een 0. 505 1 R0065 Black 75 Green 50 ref. Method 1206, 2010 Green Underside R011 Green 50 6 MToiessturt e Resistance MIL-STD-202 Method 106 1 1 R007 None 50 Black 75 None 50 Green 50 & Black 2512 2512 R012 Green 50 R008 None 50 None 50 Green 50 7 Biased Humidity MIL-STD-202 Method 103 1 1 3 HiR013gh Temp. Exposure * MGrIeenL-STD-20250 Method 108 1 1 R009 None 50 None 50 Green 50 8 Operational Life (Cyclic Load) * MIL-STD-202 Method 108 1 1 R014 Green 50 Black 100 4 R01TemperaNoneture Cyc50ling JESD22 MethodNone JA-104 50 Gr een 0. 505 1 14 Vibration MIL-STD-202 Method 204 0.5 1 R015 Green 50 R011 Green 50 6 Moisture Resistance MIL-STD-202 Method 106 1 1 15 Resistance to Soldering Heat * MIL-STD-202 Method 210 0.5 1 R012 Green 50 7 Biased Humidity MIL-STD-202 Method 103 1 1 16 R013 Thermal Shock * MGrIeenL-STD-25002 Method 107 0.5 1 8 Operational Life (Cyclic Load) * MIL-STD-202 Method 108 1 1 Green 50 R014 18 Solderability J-STD-002 >95% coverage 14 Vibration MIL-STD-202 Method 204 0.5 1 R015 Green 50 21 Board Flex AEC-Q200-005 0.5 1 15 Resistance to Soldering Heat * MIL-STD-202 Method 210 0.5 1 22 Terminal Strength AEC-Q200-006 0.25 1 16 Thermal Shock * MIL-STD-202 Method 107 0.5 1 Short Term Overload * 5 x Pr for 5s 0.5 1 18 Solderability J-STD-002 >95% coverage Notes: 1. Full AEC-Q200 qualification applies to 2512 size. The 1206 and 2010 sizes have received the tests marked *. 21 Board Flex AEC-Q200-005 0.5 1 22 Terminal Strength AEC-Q200-006 0.25 1 General Note General Note Short Term OvePrload * 5 x Pr for 5s BI 0.5 Technologies I 1 RC Welwyn TT electronics reserves the right to make changes in product specication without notice or liability. Notes: 1. Full AEC-Q200 qualification applies to 2512 size. The 1206 and 2010 sizes have received the tests marked *. All information is subject to TT Electronics own data and is considered accurate at time of going to print. All information is subject to TT electronics own data and is considered accurate at time of going to print. Power de-rating graph 100 www.bitechnologies.com www.irctt.com www.welwyn-tt.com % www.ttelectronics.com/resistors TT Electronics plc TT electronics plc General Note General Note General Note P BI Technologies IRC Welwyn BI Technologies IRC Welwyn 03.1406.17 TT Electronics reservTT electronics reserves the right to make changes in pes the right to make changes in product specificroduct speciation without notice or liability.cation without notice or liability. 50% All information is subject to TT electAll information is subject to TT Electronics own daronics own data and is consideta and is considered accured accurate at time of going to print.rate at time of going to print. All information is subject to TT Electronics own data and is considered accurate at time of going to print. Power de-rating graph www.bitechnologies.com www.irctt.com www.welwyn-tt.com 100% www.ttelectronics.com/resistors www.ttelectronics.com/resistors TT elect TT Electronics plcronics plc TT Electronics plc 06.17 11.1903.14 % 50Metal Element Current Sense Resistor ULR Series ULR25 0.5, 0.75 100 UULLRRGG32 // Non 32 6.5, 7, 8, 9, 10 2 200 UUULRLLRRG323 / e 1, 10.5.5, ,2 0, .27.55, 3 15000 Non Green 3 200 2 ULUURLLGRR2135 / e 0.15,, 10..57,5 2, ,1 2, .15.,5 3, 2 5500 2.5 4, 4.5, 5, 6 1, 5 -55 to +170 ULR25 ULR1 0.5, 20..57,5 3, ,1 3, .15.5, 2 15500 Physical DataULRB2 / 1 0.5, 0.75 100 ULRG3 / Non 4, 42.5.5, ,5 3, ,5 3.5.5, 10 110500 3 200 2 UULLRRB12 / Black 1 ULR3 1, 1.5, 2, 2.5, 3 50 e Metal ElementMetal Element 4, 4.65,, 65.,5 5, .75, 10 17050 ULR1 Black Dimensions(mm) and weight (mg)ULR1 0.5, 0.75, 1, 1.5, 2 50 ULRB2 / 6, 6.5, 7 75 Metal Element 2 0.5, 0.75, 1, 1.5, 2 50 2.5, 3, 3.5 150 Current Sense Resistor Current Sense Resistor ULR2 ULRB2 / L ULRB2 / 1 Size Coating Values 2 W 0.5, 0T (0.2).75, 1, 1.5, 2 D 50 Wt (nom) 4, 4.5, 5, 5.5, 10 100 Current Sense Resistor ULR2 (0.25) ULR1 Black 6, 6.5, 7 75 Metal Element ULR Series ULR Series Notes: 1. For higher resistance values please refer to LRMA series. 2. Package sizes 1206 and 2010 are uncoated on the top surface and unmarked. 0.2, 0.25 1.5 0.25 ULRB2 / ULR Series 1.6 0.3 1.0 25 2 0.5, 0.75, 1, 1.5, 2 50 Notes: 1. For higher resistance values please refer to LRMA series. 2. Package sizes 1206 and 2010 are uncoated on the top surface and unmarked. Current Sense Resistor ULR2 0.3, 0.4 1.4 0.25 0.5 1.35 0.25 ULR Series 1206Notes: 1. For higher resistance values please3.2 refer to LRMA series. 2. Package sizes 1206 and 2010 are uncoated on the top surface and unmarked. 0.6, 1 ,4, 5, 6 1.1 0.25 Physical Data Physical Data 1.6 0.1 0.6 20 2, 3, 10 0.6 0.25 Physical Data Physical Data Dimensions(mm) and weight (mg) 7, 8, 9 0.9 0.25 Dimensions (mm) and weight (mg) Size Coating Values L (0.25) W T (0.2) D Wt (nom) Physical Data Physical Data 0.2 2.34 0.25 DSiimzeensiCoonsa t(imngm) and weVigahltu (emsg) L (0.25) W T (0.2) 1.5 0.25 D Wt (nom) 0.2, 0.25 0.3 1.6 0.3 1.0 1.4 0.25 25 Size Coating 0.5, 0V.6a,l u1,e 4s, 5, 6 L (0.25) W T (0.2) 1.1 D0.25 Wt (nom) 0.25 2.24 0.25 1.6 0.4 1.4 0.25 2.54 0.3 1.0 50 1D2im012066ensions (mm) an0d. 5w, e02i.g,6 h3, t,1 (1,m 04g, )5, 6 3.2 3.20 01..61 00..2255 20 0.5, 0.6, 1 ,4, 5, 60.3 0.1 1.1 0.252.04 0.25 1.6 1S2iz0e6 Coating 2V7,a, 3l8u,, e19s0 L (3.02.025) W T (0.2) 00..96 D00..2255 Wt (2n0om) 2, 3, 10 1.6 0.1 0.6 0.6 0.25 20 0.1 0.4 1.84 0.25 0.5, 0.7, 8, 96, 1, 4, 5, 6 0.9 0.251.1 0.25 None 0.57,, 18,, 49, 5 10.8.94 00..2255 1.6 0.2 2.34 0.25 1206 2, 3, 10 3.20 0.6 0.25 20 2010 None 02.5,0.5 ,6 1, ,7 4, ,8 5 5.08 2.17 0.2511..5844 00..2255 2.54 0.1 2010 0.25 5.08 2.24 0.25 40 7, 8, 9 0.9 0.25 2.54 0.3 1.0 50 2, 63, 7, 8 20..5145 11..0544 00..2255 1, 4, 50.3 2.04 0.251.84 0.25 2010 5.08 40 None 0.5, 1, 4, 5 1.84 0.25 Green Green 9, 310 0.15 0.6 11..2094 00..2255 0.4 1.84 0.25 2010 5.08 2, 6, 7, 8 2.54 0.15 0.6 1.54 0.25 40 Underside 2, 6, 7, 8 2.54 1.54 0.25 0.5, 1, 4, 5 1.84 0.25 Underside 90, .150 0.6 21..6289 00..2255 2010 5.08 40 2, 6, 7, 83 0.15 1.54 0.251.04 0.25 3 1.04 0.25 00.7.55 2.54 0.15 0.6 22..4688 00..2255 40 3 1.04 0.25 9, 10 0.6 1.29 0.25 9, 1010, .57,5 6 3.0 1.29 0.2512..9438 00..2255 9,1 0 1.29 0.25 Green 0.5 2.68 0.25 1.510.15,, 65.,5 6, 7 30..02 2.98 0.2511..4933 00..2255 0.15 2.98 0.25 Green 0.75 2.48 0.25 0.2 2.88 0.25 21.53, ,6 8.5 -, 272 0.2 11..1483 00..2255 3.0 0.3 1.0 0.25, 0.31, 5, 6 3.0 2.68 0.251.93 0.25 0.2 2.88 0.25 Green 2 43, ,4 8.5 - 22 21..1188 00..2255 3.0 0.3 1.0 0.4 2.18 0.25 1.5, 6.5, 7 0.2 1.43 0.25 0.25, 0.3 2.68 0.25 0.5 - 0.7540, .45.5 1.0 1.4 2.18 0.25 2 3, 8 - 22 1.18 0.25 3.18 0.35 1.93 0.75 1 - 10 0.6 0.705.,5 2.5 11..04 0.4 2.18 0.25 4, 4.5 2.18 0.25 0.5 1.4 0.751, 2.5 01..80 0.5 1.4 0.75, 2.50.5 1.0 2.68 0.25 2512 6.35 60 11.5 00.6.85 1 0.8 0.75, 2.5 1.0 25125122 6.356.35 6060 0.75 2.48 0.25 1.5 0.65 2,1 5.5, 6 00..655 1 0.8 2512 2, 5, 6 6.35 0.5 60 1, 5, 6 1.93 0.25 2, 5, 6 0.5 13.5 3.18 00..675 1.3 0.38 3 0.7 1.3 0.38 Black 3.0 0.2 0.6 Black 3.18 0.25 2,3 35.5, 6 30..1285 000.7..751 1.3 0.38 2, 3, 8, 9, 10 1.18 0.25 3.5 0.71 Black 3443.5 0.25 0.6 000..7.671 1.3 0.38 3.18 Metal Strip Current Sense Resistors Surface Mount 4 1.43 0.25 Black 4.5 0.58 3.5 0.25 0.71 44.5 00.5.68 Metal Strip Current Sense Resistors Surface Mount 5.5, 6.5 0.47 7 2.18 0.25 4 0.6 5.54,. 56.5 00..4578 Metal Strip Current Sense Resistors Surface Mount 7 0.45 4.5 0.58 0.5 1.4 5.57, 6.5 00..4457 10 0.8 1.9 0.15 Welwyn Components 2512 6.35 60 5.5, 6.5 0.47 ULR Series 170 00..485 1.9 0.15 0.75, 2.5 1.0 Welwyn Components 7 0.45 ULR Series 10 0.8 1.9 0.15 Welwyn Components 1 0.8 ULR Series 10 0.8 1.9 0.15 Construction 1.5 0.65 Construction Construction 2, 5, 6 0.5 Construction Construction Black coat Construction 3 0.7 1.3 0.38 Black coat A low TCR resistance alloy plate, with tin plated connection bands is protectively coated on the upper and lower Black CBlackoat 3.18 0.25 A low TCR resistance3.5alloy plate, with tin plated conn0.71ection bands is protectively coated on the upper and lower faces and numerically marked with the resistance value. This part is suitable for wave or reflow soldering. A low TCR resistance alloy plate, with tin plated connection bands is protectively coated on the upper and lower faces and numerically marked with the resistance value. This part is suitable for wave or reflow soldering. 4 0.6 faces and numerically marked with the resistance value. This part is suitable for wave or reflow soldering. Green coat 4.5 0.58 G reen coat A low TCR resistance alloy plate is grooved to set the final resistance, the lower faces are tin plated for Green Underside Coat 5.5, 6.5 0.47 A low TCR resistance alloy plate is grooved to set the final resistance, the lower faces are tin plated for con nections, and it is protectively coated on the upper and lower faces and numerically marked with the resistance A low TCR resistance alloy plate is grooved to set the final resistance and the lower face only is protected with an 7 0.45 con nections, and it is protectively coated on the upper and lower faces and numerically marked with the resistance v alue. This part is ONLY suitable for reflow soldering. epoxy coating. The lower faces are tin plated for connections. This part is ONLY suitable for reflow soldering. 10 0.8 1.9 0.15 value. This part is ONLY suitable for reflow soldering. Uncoated Markin g Uncoated A low TCR resistance alloy plate is grooved to set the final resistance and the lower face only is protected with an Only black coated parts are marked. For values which are integer numbers of milliohms, the marking is 4-character A low TCR resistance alloy plate is grooved to set the final resistance and the lower face only is protected with an epoxy coating. The lower faces are tin plated for connections. This part is ONLY suitable for reflow soldering. IEC62 code e.g. R002 for 2m , R010 for 10m . For values including fractions of a milliohm the marking is 3 or epoxy coating. The lower faces are tin plated for connections. This part is ONLY suitable for reflow soldering. 4-character code using M to indicate the decimal point, e.g. M75 for 0.75m , 1M50 for 1.5m . Marking Marking Only 2512 size parts are marked. For values which are integer numbers of milliohms, the marking is 4-character Only 2512 size parts are marked. For values which are integer numbers of milliohms, the marking is 4-character IEC62 code e.g. R002 for 2m , R010 for 10m . For values including fractions of a milliohm the marking is 3 or IEC62 code e.g. R002 for 2m , R010 for 10m . For values including fractions of a milliohm the marking is 3 or 4-character code using M to indicate the decimal point, e.g. M75 for 0.75m , 1M50 for 1.5m . 4-character code using M to indicate the decimal point, e.g. M75 for 0.75m , 1M50 for 1.5m . General Note BI Technologies IRC Welwyn Sn Plated Finish Sn Plated Finish TT Electronics reserves the right to make changes in product specification without notice or liability. Sn Plated Finish GGrreeeenn CCooaatt && UUnnccooaatteedd All information is subject to TT Electronics own datBlack a and is considered accurate at time of going to print. Black www.ttelectronics.com/resistors Green Coat & Uncoated Black TTeerrmmiinnaattiioonn DDeettaaiillss:: TT Electronics plc TMaertmeriinaaltion DetailsMatt tin plated finish over copper.: Material Matt tin plated finish over a barrier layer 11.19 MaSoltdeeriraalbility M95a%tt tmininplcoatevderfaingiesh(MovILe-rSaTDbar2r0ie2rFla/ ye20r8H, 235C 2 secs) Solderability 95% min coverage (MIL-STD 202F / 208H, 235C 2 secs) Solderability 95% min coverage (MIL-STD 202F / 208H, 235C 2 secs) General Note GeneAErCal No-Qt2e00 Table 7 General Note Max. (add R0005) AEC-Q200 Table 7 MBI axT. echnologies I(add R0005) RC Welwyn TT electronics reserves the right to make changes in product specication without notice or liability. TT electGeneral Noteronics reserves the right to make changes in product specication without notice or liability. Method ref. AEC-Q200 Table 7 BMlaackx &. (add R0005) ref. Method All information is subject to TT electronics own data and is conside red accurate at time of going to print. Black & Test Green All information is subject to TT Electronics own data and is considered accurate at time of going to print. All information is subject to TT electTT electronics reserves the right to make changes in pronics own data and is consideroduct specication without notice or liabilitred accurate at time of going to print.y. www.bitechnologies.com www.irctt.com www.welwyn-tt.com Test uncoated Green ref. Method www.bitechnologies.com www.irctt.com www.welwyn-tt.com uncoated www.ttelectronics.com/resistors Black & All information is subject to TT electronics own data and is considered accurate at time of going to print. Test Green 3 High Temp. Exposure * MIL-STD-202 Method 108 www.bitechnologies.com ww1 1 w.irctt.com www.welwyn-tt.com TT electronics plc uncoated 3 High Temp. Exposure * MIL-STD-202 Method 108 1 1 TT Electronics plc TT electronics plc 4 Temperature Cycling JESD22 Method JA-104 0.5 0.5 03.14 3 High Temp. Exposure * MIL-STD-202 Method 108 1 1 TT elect4 ronics plc Temperature Cycling JESD22 Method JA-104 0.5 0.5 03.1406.17 6 Moisture Resistance MIL-STD-202 Method 106 1 1 4 Temperature Cycling JESD22 Method JA-104 0.5 0.5 03.14 6 Moisture Resistance MIL-STD-202 Method 106 1 1 7 Biased Humidity MIL-STD-202 Method 103 1 1 6 Moisture Resistance MIL-STD-202 Method 106 1 1