VRW68-4M7JI TT Electronics

High Voltage High Voltage Thick Film Resistors Welwyn Components Thick Film Resistors VRW Series VRW Series VRW37 approved to BS / EN / IEC 60065 s VRW37 meets the requirements of BS / EN / High working voltage to 10kV in compact size IEC 60065 High ohmic range to 68M s High working voltage to 10kV in compact High pulse load capability size Robust flameproof coating material s High ohmic range to 68M RoHS compliant s High pulse load capability s Robust flameproof coating material s RoHS compliant Electrical Data VWR 25 VWR 37 VRW68 Pow re ing ta 70C awtts 5 1.0 eR sist na cer na eg (O mh s) Kto 03 M Kto 03 M 100K to 68M Limitingelement ov ltage ov lts cd oracp 10000 Is loatoi n v lotage ov lts T RC p mp /C eR sist na ceToler na ce % 1 Standard Values E24 or E96 rmalIm ce C/ awtt 70 Ambient et mp ure ar nge - 55 to+ C Physical Data (Dimensions (mm) & Weight (g) Type L D f d PCB Min Wt. d Max Max min Nom mount bend nom centres radius VRW25 6.2 2.5 21 0.60.05 10.2 0.6 0.3 d D L f 9.0 3.7 19.6 0.80.05 12.7 1.2 0.5 VRW37 VRW68 15.5 5.0 27 0.80.05 20.3 1.2 1.15 Construction Terminations Resistive thick film material is applied to high-grade ceramic Material: Hot tin dipped copper wire rods. Tin-plated steel caps are force fitted and the Strength: The terminations meet the requirements termination wires are welded to the caps. The value is of IEC 68.2.21 obtained by a helical cut in the film and finally the resistor Solderability: The terminations meet the requirements body is protected by a cement coating. of IEC 115-1 Clause 4.17.3.2 Solvent Resistance Marking The body protection and marking are resistant to all normal 1% tolerance resistors are colour coded with 5 bands. 2% industrial cleaning solvents suitable for printed circuits. and 5% tolerance have 4 bands. IEC62 colours are used. Flammability The resistor coating will not burn under any condition of applied temperature or power overload. General Note General Note TT electronics reserves the right to make changes in product specification without notice or liability. Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics own data and is considered accurate at time of going to print. All information is subject to Welwyns own data and is considered accurate at time of going to print. A subsidiary of www.bitechnologies.com www.irctt.com www.welwyn-tt.com TT electronics plc Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK TT electronics plc 05.08 Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com Issue C 07.06 09. 11 70 C 551 tare 211 041 nadep ehT 5, 2, 002 007 0053 0061 kae 001 001 5.0 2.0 tarHigh Voltage High Voltage High Voltage High Voltage High Voltage Thick Film Resistors Thick Film Resistors Thick Film Resistors Thick Film Resistors Welwyn Components Thick Film Resistors Welwyn Components VSRQW SeriesP Series VSRQW SeriesP Series Welwyn Components VRW Series VSRQW SeriesP Series Welwyn Components VSRQW SeriesP Series Performance Data Performance Data Performance Data Performance Data Maximum Typical Maximum Typical Load at rated voltage (1000hrs at 70C) R% 1.5* 0.4 Maximum Typical Load at rated voltage (1000hrs at 70C) R% 1.5* 0.4 Maximum Typical Derating from rated power at 70 C zero at 155 C Load at rated voltage (1000hrs at 70C) R% 1.5* 0.4 Derating from rated power at 70 C zero at 155 C Load at rated voltage (1000hrs at 70C) R% 1.5* 0.4 Overload (10 x 5s on, 45s oOverload (10 x 5s at 6.25 x fPrf at 6.25 x Pr not exceeding 2 x LEV) not exceeding 2 x LEV) R% 1 0.15 2 Derating from rated power at 70 C zero at 155 C Overload (10 x 5s on, 45s oOverload (10 x 5s at 6.25 x fPrf at 6.25 x Pr not exceeding 2 x LEV) not exceeding 2 x LEV) R% 12 0.15 Derating from rated power at 70 C zero at 155 C Damp heat steady state (56 days, 40C, 90% RH) R% 1.5 0.1 Overload (10 x 5s on, 45s oOverload (10 x 5s at 6.25 x fPrf at 6.25 x Pr not exceeding 2 x LEV) not exceeding 2 x LEV) R% 12 0.15 Damp heat steady state (56 days, 40C, 90% RH) R% 1.5 0.1 Overload (10 x 5s on, 45s oOverload (10 x 5s at 6.25 x fPrf at 6.25 x Pr not exceeding 2 x LEV) not exceeding 2 x LEV) R% 1 0.15 2 Climatic sequence R% 1.5 0.2 Damp heat steady state (56 days, 40C, 90% RH) R% 1.5 0.1 Climatic sequence R% 1.5 0.2 Damp heat steady state (56 days, 40C, 90% RH) R% 1.5 0.1 Climatic category 55/155/56 Climatic sequence R% 1.5 0.2 Climatic category 55/155/56 Climatic sequence R% 1.5 0.2 Temperature rapid change R% 0.5 0.05 Climatic category 55/155/56 Temperature rapid change R% 0.5 0.05 Climatic category 55/155/56 Resistance to solder heat R% 0.5 0.05 Temperature rapid change R% 0.5 0.05 Resistance to solder heat R% 0.5 0.05 Temperature rapid change R% 0.5 0.05 Vibration R% 0.5 0.05 Resistance to solder heat R% 0.5 0.05 Vibration R% 0.5 0.05 Resistance to solder heat R% 0.5 0.05 Voltage Proof volts 700 min Vibration R% 0.5 0.05 Voltage Proof volts 700 min Vibration R% 0.5 0.05 * 2% for ohmic values above 24M Voltage Proof volts 700 min * 2% for ohmic values above 24M Voltage Proof volts 700 min * 2% for ohmic values above 24M Pulse Performace * 2% for ohmic values above 24M Pulse Performace Pulse Performance Pulse Performance Pulse Performace 100 Pulse Performace Pulse Performance 100 Pulse Performance 100 100 VRW25 VRW25 VRW37 10 VRW37 10 VRW25 VRW25 VRW68 VVRRWW6387 10 VRW37 10 VRW68 VRW68 1 1 0.1 1 10 100 0.1 1 10 100 1 1 0.1 Va1lue (megohm10s) 100 Value (megohms) 0.1 1 10 100 Value (megohms) Maximum peak voltage in accordance with IECVa l6u0e0 (65me cghoahptmesr) 14.1 Maximum peak voltage in accordance with IEC 60065 chapter 14.1 50 discharges from a 1nF capacitor charged to V max. 12 discharges/minute. Maximum peak voltage in accordance with IEC 60065 chapter 14.1 50 discharges from a 1nF capacitor charged to V max. 12 discharges/minute. Maximum peak voltage in accordance with IEC 60065 chapter 14.1 50 discharges from a 1nF capacitor charged to V max. 12 discharges/minute. 50 discharges from a 1nF capacitor charged to V max. 12 discharges/minute. Application Notes Application Notes Application Notes 1. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An Application Notes 1. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An estimate of the temperature rise to be expected at the center of the body can be calculated using the 1. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An estimate of the temperature rise to be expected at the center of the body can be calculated using the 1. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An thermal impedance figures given under Electrical Data. estimate of the temperature rise to be expected at the center of the body can be calculated using the thermal impedance figures given under Electrical Data. estimate of the temperature rise to be expected at the center of the body can be calculated using the thermal impedance figures given under Electrical Data. 2. VRW resistors can be supplied with radial, goalpost or lancet pre-formed leads. The VRW37 is also thermal impedance figures given under Electrical Data. 2. VRW resistors can be supplied with radial, goalpost or lancet pre-formed leads. The VRW37 is also available in an SMD format with Z formed leads and packed in blister tape. Consult Factory for details. 2. VRW resistors can be supplied with radial, goalpost or lancet pre-formed leads. The VRW37 is also available in an SMD format with Z formed leads and packed in blister tape. Consult Factory for details. 2. VRW resistors can be supplied with radial, goalpost or lancet pre-formed leads. The VRW37 is also available in an SMD format with Z formed leads and packed in blister tape. Consult Factory for details. available in an SMD format with Z formed leads and packed in blister tape. Consult Factory for details. Type b c Type b c Packaging Packaging VRW25/37 52 2mm 5 0.5mm Type b c VRW25/37 52 2mm 5 0.5mm Type b c Packaging Our standard packaging for VRW is taped and Packaging Our standard packaging for VRW is taped and 73 2mm 10 0.5mm VRW25/37VRW68 52 2mm 5 0.5mm 73 2mm 10 0.5mm VRW68 VRW25/37 52 2mm 5 0.5mm boxed. The critical dimensions are shown in Our standard packaging for VRW is taped and boxed. The critical dimensions are shown in 73 2mm 10 0.5mm Our standard packaging for VRW is taped and VRW68 73 2mm 10 0.5mm Figure 1. The component wires will not VRW68 boxed. The critical dimensions are shown in Figure 1. The component wires will not boxed. The critical dimensions are shown in protrude beyond the outside edge of the Figure 1. The component wires will not protrude beyond the outside edge of the c Figure 1. The component wires will not c tapes. Alternative packaging is available by protrude beyond the outside edge of the tapes. Alternative packaging is available by protrude beyond the outside edge of the c request. Pre-formed resistors are supplied c tapes. Alternative packaging is available by request. Pre-formed resistors are supplied tapes. Alternative packaging is available by loose packed in plastic bags or boxes. request. Pre-formed resistors are supplied loose packed in plastic bags or boxes. f1 f2 request. Pre-formed resistors are supplied f1 f2 loose packed in plastic bags or boxes. loose packed in plastic bags or boxes. 6 6 f1 f2 6 6 b mm f1 f2 mm b mm mm Body location f1-f2 1.4mm 6 6 Body location f1-f2 1.4mm 6 b 6 mm mm b mm mm Body location f1-f2 1.4mm Body location f1-f2 1.4mm General Note TT electronics reserves the right to make changes in product specification without notice or liability. Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com 05.08 All information is subject to TT electronics own data and is considered accurate at time of going to print. Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com 05.08 www.bitechnologies.com www.irctt.com www.welwyn-tt.com Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com 05.08 71 T TT electrelephone: +44onics plc (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com 05.08 71 09. 11 71 71 VVmmaVVaxmxm ( ak(akxVxV )( k()kVV))