Inductive sensor BI1-EG05-Y1 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M5 x 0.5 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) Cable connection Wiring Diagram Type designation BI1-EG05-Y1 Ident no. 1003240 Rated switching distance Sn 1 mm Mounting conditions Flush Secured operating distance (0,81 x Sn) mm Functional principle Correction factors St37 = 1 Al = 0.3 stainless steel = 0.7 Ms = 0.4 Inductive sensors detect metal objects con- Repeat accuracy 2 % of full scale tactless and wear-free. For this, they use a Temperature drift 10 % high-frequency electromagnetic AC field that Hysteresis 110 % interacts with the target. Inductive sensors Ambient temperature -25+70 C generate this field via an RLC circuit with a ferrite coil. Output function 2-wire, NAMUR Switching frequency 5 kHz Voltage Nom. 8.2 VDC Non-actuated current consumption 2.1 mA Actuated current consumption 1.2 mA Approval acc. to KEMA 02 ATEX 1090X Design Threaded barrel, M5 0.5 Dimensions 30 mm Housing material Stainless steel, 1.4427 SO Active area material Plastic, PBT-GF20 Max. tightening torque housing nut 5 Nm Electrical connection Cable Cable quality 3 mm, Blue, Lif9YYW, PVC, 2m 2 Cable cross section 2 x 0.14 mm Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 6198 years acc. to SN 29500 (Ed. 99) 40 C 1 / 4 Hans Turck GmbH & Co.KG D-45472 Mlheim an der Ruhr Witzlebenstrae 7 Tel. 0208 4952-0 Fax 0208 4952-264 more turck.com www.turck.com Edition 2017-09-20T10:49:07+02:00Inductive sensor BI1-EG05-Y1 Distance D 2 x B Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Diameter active area B 5 mm 2 / 4 Hans Turck GmbH & Co.KG D-45472 Mlheim an der Ruhr Witzlebenstrae 7 Tel. 0208 4952-0 Fax 0208 4952-264 more turck.com www.turck.com Edition 2017-09-20T10:49:07+02:00