Product summary ODIN-W2 series Stand-alone IoT gateway modules with Wi-Fi and Bluetooth Standard The most versatile industrial IoT gateway modules Dual-band Wi-Fi and dual-mode Bluetooth Wi-Fi station / access point Professional u-connect software for accelerated time to market High speed RMII interface Wi-Fi enterprise security Automotive Global certification 14.8 22.3 3.2 mm 14.8 22.3 4.7 mm ODIN-W262 ODIN-W263 Product description The ODIN-W2 is a compact and powerful stand-alone multiradio module, designed for Internet-of-Things gateway Grade applications. The module includes an embedded Bluetooth Automotive stack, Wi-Fi driver, IP stack, and an application for wireless Professional data transfer, all configurable using AT commands. The Standard wireless support includes dual-mode Bluetooth version 4.2 Radio (BR/EDR and low energy) and dual-band Wi-Fi (2.4 and 5 GHz Chip inside WL1837 Bluetooth qualification v4.2 bands). Bluetooth low energy The ODIN-W2 modules are pre-flashed with u-connectXpress Bluetooth BR/EDR software. This software is easy to use and reduces the time, Bluetooth output power EIRP dBm 14 11 11 risk and cost of wireless development significantly. The Antenna type (see footnotes) U.FL metal metal software provides a number of features that can be configured Wi-Fi 2.4 / 5 GHz 2.4 and 5 2.4 and 5 2.4 and 5 from the host using AT commands. Wi-Fi IEEE 802.11 standards a/b/g/n a/b/g/n a/b/g/n The module supports point-to-point and point-to-multipoint Wi-Fi output power EIRP dBm 18 15 15 configurations and can have concurrent Bluetooth and Wi-Fi Max Wi-Fi range meters 300 250 250 connections. It can operate in Wireless Multidrop or Extended Application software Data Mode for advanced multipoint capabilities. Operation u-connectXpress in Point-to-Point Protocol (PPP) mode gives the host a direct Interfaces IP interface for advanced use cases. Data can be transferred UART 1 1 1 either over UART or RMII. Both Wi-Fi station as well as micro RMII 1 1 1 access point modes are supported. GPIO pins 23 23 23 Features The u-connectXpress software for ODIN-W2 enables AT command interface communication with cloud services. The software features Point-to-Point Protocol end-to-end security with TLS as well as built-in MQTT protocol Low Energy Serial Port Service for lightweight communication with cloud based applications. Wi-Fi throughput Mbit/s 20 20 20 ODIN-W2 can also act as a MQTT-SN gateway allowing devices Maximum Bluetooth connections 7 7 7 without a TCP/IP stack to make use of the MQTT protocol. This 10 10 10 Micro Access Point max stations allows for example, networks of Bluetooth low energy sensors Wi-Fi enterprise security to easily communicate with the cloud. End-to-end security (TLS) The module is professional grade with an extended temperature WPA/WPA2 range and is radio type approved for multiple countries, which U.FL = connectors for externa antenna metal = Internal metal PIFA antenna reduces the integration work and cost. UBX-15004332 - R21 ODIN-W260 ODIN-W262 ODIN-W263ODIN-W2 series Features Package Wi-Fi standards IEEE 802.11a/b/g/n Dimensions ODIN-W260: 14.8 x 22.3 x 3.2 mm IEEE 802.11d/e/i/h/r/w ODIN-W262: 14.8 x 22.3 x 4.7 mm ODIN-W263: 14.8 x 22.3 x 4.7 mm Wi-Fi channels 2.4 GHz: 1-13 5 GHz: 36-165 (U-NII Band 1, 2, 2e, 3) Mounting Solder edge pins with castellations (visually inspectable) Wi-Fi maximum IEEE 802.11a/g: 54 Mbit/s transfer rates IEEE 802.11b: 11 Mbit/s IEEE 802.11n: 130 Mbit/s (MIMO), Environmental data, quality & reliability 65 Mbit/s (SISO) Operating temperature 40 C to +85 C Bluetooth v4.2 (Bluetooth low energy and Bluetooth BR/EDR) Output power Wi-Fi: 18 dBm EIRP Interfaces Bluetooth BR/EDR: 14 dBm EIRP Bluetooth LE: 10 dBm EIRP UART Sensitivity Wi-Fi 2.4 GHz: -98 dBm EIRP RMII Wi-Fi 5 GHz: -93 dBm EIRP GPIO Bluetooth BR/EDR: -93 dBm EIRP 2 U.FL antenna connectors (external antenna version only) Bluetooth LE: -98 dBm EIRP Antenna Internal antenna or dual U.FL connectors for external antennas Certifications and approvals 1 Type approvals Europe (ETSI RED) US (FCC/CFR 47 part 15 u-connectXpress software unlicensed modular transmitter approval) Canada (IC RSS) Japan (MIC) Taiwan (NCC) Embedded u-blox Wi-Fi driver China (SRRC) South Korea (KCC) Australia software u-blox Bluetooth stack (ACMA) New Zealand Brazil (Anatel) South Serial port application Africa (ICASA) Russia (FSS/FAC) Combined IPv4 and limited IPv6 stack Health and safety EN 62479, EN 60950-1, IEC 60950-1 Point-to-Point protocol Access point Medical Electrical EN 60601-1-2 Equipment Wi-Fi Security WEP 64/128 WPA and WPA2 Bluetooth v4.2 TKIP and AES/CCMP hardware accelerator qualification LEAP, PEAP, EAP-TLS End-to-end security with TLS 1 ODIN-W263 is only approved for use in Europe and other territories where the ETSI Radio Equipment Directive (RED) applies. Wi-Fi operational AP (DFS channels excluded) modes Station Bluetooth profiles u-blox Low Energy Serial Port Service Support products and services GATT EVK-W262U Evaluation kit with USB for ODIN-W262 SPP DUN EVK-ODIN-W260 Evaluation kits for ODIN-W260 and PAN roles: PANU and NAP EVK-ODIN-W262 ODIN-W262. Enables access to all module Low energy roles: Central and Peripheral interfaces. Max. connections 7 Wireless Multidrop For concurrent connections to Wi-Fi, Product variants Bluetooth BR/EDR and Bluetooth Low Energy ODIN-W260 Module with dual U.FL connectors for external Extended Data For individually controlled multipoint data antennas Mode channels ODIN-W262 Module with internal antenna Point-to-Point For UART-based IP connectivity between host Protocol (PPP) and module, enables individually controlled ODIN-W263 Module with internal antenna, only approved data channels and AT commands in parallel for Europe Electrical data Power supply 3.0 VDC - 3.6 VDC I/O voltage 1.8 V Legal Notice: Further information u-blox reserves all rights to this document and the information contained herein. Products, For contact information, see www.u-blox.com/contact-us. names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this doc- For more product details and ordering information, see the product ument or any part thereof without the express permission of u-blox is strictly prohibited. data sheet. The information contained herein is provided as is. No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by u-blox at any time. For most recent documents, please visit www.u-blox.com. UBX-15004332 - R21 Copyright 2020, u-blox AG