SAM-M8Q-0 U-Blox

SAM-M8Q Easy-to-use u-blox M8 GNSS antenna module Data sheet Abstract Technical data sheet describing SAM-M8Q, a module which provides concurrent reception of up to three GNSS (GPS, Galileo, GLONASS). Its easy design-in requires no RF expertise and allows consistently strong performance regardless of installation. The surface-mount device with a tiny form factor (15.5 x 15.5 x 6.3 mm) enables simple and automated manufacturing. www.u-blox.com UBX-16012619 - R06 SAM-M8Q - Data sheet Document information Title SAM-M8Q Subtitle Easy-to-use u-blox M8 GNSS antenna module Document type Data sheet Document number UBX-16012619 Revision and date R06 16-Mar-2020 Document status Production Information Product status Corresponding content status In Development / Objective Specification Target values. Revised and supplementary data will be published later. Prototype Engineering Sample Advance Information Data based on early testing. Revised and supplementary data will be published later. Initial Production Early Production Information Data from product verification. Revised and supplementary data may be published later. Mass Production / Production Information Document contains the final product specification. End of Life This document applies to the following products: Product name Type number ROM/FLASH version PCN reference SAM-M8Q SAM-M8Q-0-10 ROM SPG 3.01 N/A u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox. The information contained herein is provided as is and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent documents, visit www.u-blox.com. Copyright u-blox AG. UBX-16012619 - R06 Document information Page 2 of 26 Production Information