SA69-0200-1100-C0 UDOO

Datasheet UDOO Neo 23.02.17 SC.pdf 1 23/02/17 12:07 THE NEW IoT PLATFORM Arduino, Linux & Android in your pocket. The wireless Internet of Things playground. TM ARDUINO Born to be wireless Wi-Fi 802.11 b/g/n Bluetooth 4.0 BLE 9 Axis sensors Accelerometer Gyroscope Magnetometer C M Y CM MY CY CMY A9 Credit-card sized K low power consumption board 89mm x 59mm (3.50 x 2.32) M4 Powerful 1GHz Cortex-A9 + M4 I/O realtime co-processor STARTING FROM 49.90 - 512 RAM - 1Gb RAM - 1Gb RAM - Ethernet - Wi-Fi/Bluetooth - Wi-Fi/Bluetooth - Motion Sensors - Motion Sensors - EthernetDatasheet UDOO Neo 23.02.17 SC.pdf 2 23/02/17 12:07 UDOO NEO is an all-in-one open hardware low-cost computer, equipped with a NXP i.MX 6SoloX applications processor for Android and Linux UDOONeo embeds two cores on the same processor: a powerful 1GHz ARM Cortex-A9, and up to a 200MHz Cortex-M4 I/O real-time co-processor. While the Cortex-A9 can run both Android Lollipop and UDOObuntu 2, a dedicated Ubuntu-based Linux distro, the Cortex-M4 allows easy access to a full-stack Arduino environment. The snap-in connector ensures a plug-and-play interaction with most sensors and actuators. Thanks to its embedded 9-axis motion sensors and Wi-Fi + Bluetooth 4.0 module, the board is ideal to create robots, drones and rovers as well as any Mobile IoT project your imagination desires. FEATURES NXP i.MX 6SoloX applications processor with Processor an embedded ARM Cortex-A9 core and a Cortex-M4 Core BOTTOM DDR3 512MB (Basic) or 1GB (Extended and Full) Memory Graphics Vivante GC420 Integrated 2D/3D graphics accelerator C M 1x Micro HDMI Interface Video Out 1x LVDS interface + touch (I2C signals) Y 1x Analog camera connection supporting NTSC and PAL Video In 1x 8-bit Digital camera interface* CM MicroSD card slot onboard Mass Storage MY 8-bit SDIO interface* CY HDMI audio transmitter Audio 1x S/PIDF & I2S* CMY 1x USB 2.0 Type A ports USB 1x USB OTG (micro-AB connector) K Fast ethernet RJ45 10/100Mbps (only Basic and Full) Networking Wi-Fi 802.11 b/g/n Direct Mode SmartConfig and TOP Bluetooth 4.0 Low Energy (only Extended and Full) 3x UART ports* Serial Ports 2x CAN Bus interfaces* 8x PWM signals* 3x I2C interface* Other Interfaces 1x SPI interface* 6x multiplexable signals* 1x DC Micro USB 5 V 1x DC Power Jack 6-15 V Power Supply 1x RTC Battery Connector 1x Green Power Status LED LEDs 2x User Configurable LEDs (Red and Orange) 3-Axis Accelerometer (only Extended and Full) 3-Axis Magnetometer (only Extended and Full) Integrated 3-Axis Digital Gyroscope (only Extended and Full) Sensors 1x Sensors Snap-in I2C connector 89mm x 59mm (3.50 inch x 2.32 inch) Dimensions Arduino-compatible through the standard Arduino Uno Arduino Pinout layout and compatible with Arduino shields. 32 extended GPIOs (A9 dedicated) Digital I/O Pins 22 Arduino GPIOs (M4 dedicated) Analog Input Pins 6 available Pins Operating Android Marshmallow 6.0.1 Linux UDOObuntu2 (14.04 LTS) System 23.02.2017 *Available on Pin Header Information subject to change. Please visit www.udoo.org to find the latest version of the datasheet.