T60404-N4646-X111 Vacuumschmelze

Item no.: T60404-N4646-X111 SPECIFICATION V A C U U M S C H M E L Z E K-No.: 25440 Date: 17.04.2013 100 A Current Sensor For the electronic measurement of currents: DC, AC, pulsed, mixed ..., with a galvanic Isolation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customers Part no.: Page 1 of 2 Customer: Standard type Description Characteristics Applications Mainly used for stationary operation in industrial Closed loop (compensation) Excellent accuracy applications: Current Sensor with magnetic Very low offset current field probe AC variabel speed drives and servo motor Very low temperature dependency and offset drives Printed circuit board mounting current drift Casing and materials UL-listed Static converters for for DC motor drives Very low hysteresis of offset current Battery supplied applications Short response time Switched Mode Power Supplies (SMPS) Wide frequency bandwidth Power Supplies for welding applications Compact design Uninterruptable Power Supllies (UPS) Reduced offset ripple Electrical data Ratings I Primary nominal r.m.s. current 100 A PN R Measuring resistance V = 12V 0 ... 200 M C V = 15V 5 400 C I Secondary nominal r.m.s. current 50 mA SN K Turns ratio 1: 2000 N Accuracy Dynamic performance data min. typ. max. Unit I Max. measuring range P,max V = 12V, R = 5 (t = 10sec) 188 A C M max V = 15V, R = 5 (t = 10sec) 236 A C M max X Accuracy I , T = 25C 0.1 0.5 % PN A Linearity 0.1 % L I Offset current I =0, T = 25C 0.02 0.05 mA 0 P A t Response time 1 s r t (I ) Delay time at di/dt = 100 A/s 200 ns P,max f Frequency bandwidth DC...200 kHz General data min. typ. max. Unit T Ambient operating temperature -40 +85 C A T Ambient storage temperature -40 +90 C S m Mass 15 g V Supply voltage 11.4 12 or 15 15.75 V C I Current consumption 18 mA C Constructed and manufactored and tested in accordance with EN 61800-5-1 (primary vs. secondary) Reinforced insulation, Insulation material group 1, Pollution degree 2 S Clearance (component without solder pad) 12 mm clear S Creepage (component without solder pad) 12 mm creep V System voltage overvoltage category 3 RMS 600 V sys V Working voltage (table 7 acc. to EN61800-5-1) work over voltage category 2 RMS 1000 V U Rated discharge voltage peak value 1225 V PD Max. potential difference acc. to UL 508 RMS 600 V AC Maximale Dauer- und Spitzenstrme bei bestimmten Temperaturen Supply voltage 12 V: Supply voltage 15V: T 85 C 85 C 70 C 55 C A T 85 C 85 C 70 C 55 C A I 100 A 125 A 150 A 150 A P 150 A I 100 A 125 A 150 A P I 188 A 183 A 185 A 194 A P,max I 236 A 204 A 232 A 244 A P,max R 5 5 5 5 M R 5 20 5 5 M Date Name Isuue Amendment 17.04.13 KRe. 81 Mechnaical outline: marking with UL-sign and max. potential difference acc. to UL 508 added. CN-651 05.02.13 Le 81 Mechanical outline changed (the reference line at the standoff is just a bit down-eccentric). Lapidary change. freig.: HS Hrsg.: KB-E Bearb: KB-PM IA: KRe. Le released editor designer check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden Any offenders are liable to pay all relevant damages. Item no.: T60404-N4646-X111 SPECIFICATION V A C U U M S C H M E L Z E K-No.: 25440 Date: 17.04.2013 100 A Current Sensor For the electronic measurement of currents: DC, AC, pulsed, mixed ..., with a galvanic Isolation between the primary circuit (high power) and the secondary circuit (electronic circuit) Customers Part no.: Page 2 of 2 Customer: Standard type Mechanical outline (mm): General tolerances DIN ISO 2768-c 13,97 Connections: 21 13: 0,7 x 0,7 mm 1 2 3 Tolerances grid distance 0,2mm 6,55 14,3 *= preliminary Marking: DC = Date Code 22 F = Factory UL-sign 22,9 4646X111 5,08 36,5 F DC Marking 27,6 12,35 0,4 4,70,5* 5,2 0,7x0,7 12,1 1,6 3,2 22,9 Explanation: DC = Date Code Format YWW Schematic diagram i 1 + V P c + 3 I + s + RM - Ca 2 - V c M Temperature of the primary conductor should not exceed 100C Additional indications are obtainable on request. This specification is no declaration of warranty acc. BGB 443 dar. freig.: HS Hrsg.: KB-E Bearb: KB-PM IA: KRe. Le released editor designer check Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden Any offenders are liable to pay all relevant damages.