CCK220-3U Vector

CATALOG 128 CATALOG 128.qxd 3/7/2017 10:30 AM Page 30 tm DIN-Based VectorPak Subracks EMC Subracks / DIN Module Subracks Subracks for Card Retainers / Levers tm VectorPak CG4 card guides are fairly straight, non-keyable type intended for use with card retainers for our DIN modules. 3U and 6U standard and up to 400mm depth. More information on our DIN modules can be found at TM www.vectorelect.com VECTORPAK SUBRACKS DIN Module Subracks. Subrack Ordering Information CCX XX - XX - XX Model Numbers A = assembled subracks K = unassembled flat-packed kit Covers (Optional) 01 = Top & bottom, vented Module or 02 = Rear fixed Card Length / Sidewall Depth 03 = Both 01 & 02 3U 04 = Custom 46 = 160mm 8.5 05 = Solid Top & Bottom 47 = 160mm 12.0 51 = 220mm 12.0 50 = 280mm 15.0 54 = 340mm 16.0 CCA46 to CCA57 for card retainers or DIN Modules 55 = 400mm 18.0 6U 48 = 160mm 10.0 Inside Width 49 = 160mm 12.0 (not including flanges) 52 = 220mm 15.0 36 = 36HP 7.4 53 = 280mm 15.0 44 = 44HP 9.0 56 = 340mm 16.0 64 = 64HP 13.0 57 = 400mm 18.0 84 = 84HP 17.0 Module Ordering Information EMA XXX - XX - XX Top / Bottom Cover Front Panel Depth 160mm = Module depth 6.560 220mm = Module depth 8.922 Width in HP 280mm = Module depth 11.284 06 = 6HP (1.2) Rear Panel 340mm = Module depth 13.647 15 = 15HP (3.0) 400mm = Module depth 16.009 23 = 23HP (4.6) 42 = 42HP (8.4) Height 56 = 56HP (11.2) 3U = Module Height 5.060 6U = Module Height 10.310 Left / Right Side Panels Aluminum Handle PCB Retainers and Ejector Levers For Use Without Front Panels To secure and extract PCBs with- out front panels. Optional card ejec- tor levers attach to 0.062 th PCBs. TM Intended for use with VectorPak CCA46 through CCA57 series sub- racks for non-keyable card guides. P/N. Description CG4-160/12 12 straight, non-keyable card guides with retainers, 160mm cards CG4-220/12 12 straight, non-keyable card guides with retainers, 220mm cards CG3-160S/12 12 straight non-keyable card guides only CG4-RET/12 Card guide retainers only, pack of 12 CG4-LEJ/12 Card guide levers, ejector pull-type, pack of 12 30 www.vectorelect.com Specification subject to change without notice 800-423-5659 DIN SubracksX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Racks & Rack Cabinet Accessories category: Click to view products by Vector manufacturer: Other Similar products are found below : M00-PLN F2424 8351-832-A-24 9104 9105 PLFF2000 H-9163-B 1427C3 HTS10 PC-79 SC10-3A SC4-28 CG3-340S/12 CP-001BK M6123-4007-SS TS170 LP40 5261304-07 CG3-160G 7112C-PLN ALUM CM10 8610-3124-S-26 TS81 7142 GP134 M6125-4007-A-24 M6127-4007-SS PBCOVER 512 AEG-4000G AEG-3000G HD99 SR2-66A2 FP10B4HP-1 SR16-66A2 FP52-2 1406-1006-01 29478 TS2535 TS169-6 CAC2 HA19-3U BR-19-10-1 TS180 CG3-ESD SC11-1 CFS-1.00/2.20 AX6145WM HEC0800PB ZC633R