DIN Subracks CATALOG 128 CATALOG 128.qxd 4/24/2014 10:05 AM Page 29 tm DIN-Based VectorPak Subracks 4HP Keyable Card Guides IEEE 1101.10 P/N CG3-160 Injection molded Grey Card Guide tm VectorPak CG3-160 polycarbonate card guide for 0.062 to 0.100 thickness cards. CG3-K02 Red Keys PCB ESD Contact for CG-3 Card Guides CG3-K01 Grey Keys P/N CG3-ESD/12 Keys are used for keying plug-in assemblies such as front panels and prevents them from being used in incorrect slots. These keys are installed into the front tm chambers of VectorPak CG3-160 or CG3-220 card guides and matched with an offsetting key inserted into type IV injector/ejector handles. By keying upper and lower card guides, over 4,000 combinations are possi- ble. Available in packs of 25 in red or grey (RAL 7032). ESD clip makes contact with rail tm Electrostatic discharge clips (ESD) for VectorPak CG3-Series card guides will provide permanent ES discharge of the PCB before contact with connector P/N CG3-80 Card Guide 80mm rear I/O card guides are designed for use with P/N CG3 U-type card guide, our standard CG3-ESD clips and are fully keyable. Comes with self-tapping screw for attachment to over 220mm and custom length horizontal rail. Pack of 12 includes 6 top and 6 bottom. Description Plug-in Power Supply Card Guide Part Number 2))6(7 CG3-80/12 80mm for rear I/O (6 pair of top/bottom) Pk 12 CG3-80E/12 80mm with ESD Clips (6 pair of top/bottom) Pk 12 CG3-160/12 160mm, injection molded Pk 12 CG3-160E/12 160mm, injection molded with ESD clips Pk 12 CG3-160R 160mm RED/ control slot Pair CG3-220/12 220mm, injection molded Pk 12 CG3-220E/12 220mm, injection molded with ESD clips Pk 12 CG3-280U/12 280mm, 3-piece assembly Pk 12 CG3-340U/12 340mm, 3-piece assembly Pk 12 CG3-400U/12 400mm, 3-piece assembly Pk 12 CG3-ESD/12 Universal ESD clips (will fit all of the above) Pk 12 P/N CG3-160G CG3-160G 160mm, injection molded, 0.5HP offset, Pair (sold in pair of top & bottom) green for power supply CG3-K01/25 Grey Keys Pk 25 0.5HP (0.100) offset power supply card guide CG3-K02/25 Red Keys Pk 25 for 0.062 to 0.100 thickness cards. 29 www.vectorelect.com 800-423-5659ELECTRONICS & TECHNOLOGY, INC. A FINE TECHNOLOGY GROUP Specification subject to change without notice 29b 800-423-5659 www.vectorelect.com