A. This Vermason PCB rack is moulded from a carbon black-filled polypropylene compound. B. These racks are designed to protect CMOS loaded boards in storage. C. Recommended maximum operating temperature is 85C. D. Open carrying handles. E. Measurements: 175mm x 500mm. F. Weight: 0.7kg. G. 20 slots with easy-to-load angle: 3mm x 8mm on a 18.75mm pitch. H. Recyclable Tools intended for use within the EPA ESD protected area shall, as far as is practicable, be so constructed that they do not generate or hold an electrostatic charge .All tools and machinery, for example electrical, mechanical or pneumatic, shall be so constructed that any non-insulating part of the tool or machine which may touch an ESDS ESD sensitive items shall be at EPA ground potential. EN 61340-5-1 clause 5.2.10 Tools, machinery, dispensers and test equipment Properties UNIT TEST METHOD Electrical Properties Surface Resistance <10E6 Ohms/square ASTM D-257 Volume Resistance <10E6 Ohms-cm ASTM D-257 Mechanical Properties Tensile Strength Break 2860 (19.7) psi (MPa) ASTM D-638 Tensile Elongation Break 2.5 % ASTM D-638 ITEM DESCRIPTION Made in America 237215 Conductive PCB Rack, 175mm x 500mm Conductive PCB Rack, 175mm x 500mm VERMASON Drawing Number DATE: UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, SG6 2TD UK PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 237215 February 2009 E-MAIL:Service Vermason.co.uk, INTERNET: Vermason.co.uk 2009 VERMASONX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 200535 203015 237670 230260 238711 35594 230660 072425B 222547 50424 242296 229775 J6609 VER-29082 47200 231725 242270 47201 230480 231250 203065 237200 249205 230310 229795 230647 230370 231275 237675 229100 35267 242278 231280 35595 231345 229135 230420 230646 35592 VER-26457 35622 241030 241100 ASBB4