A. Vermason packaging tape VER-27037 is a conventional self-adhesive PVC tape. B. It uses an acrylic gum adhesive. The tape is yellow and is printed in black with the ESD susceptibility symbol per EN 61340-5-1. C. The tape is tribocharging and is not suitable for use in an EPA. It is however suitable for sealing secondary packaging of electrostatic sensitive devices such as cardboard boxes. D. Roll width is 50mm, roll length is 66m. Item Description VER-27037 Tape, Packaging, ESD Logo, 50mm x 66m Tape dispenser only shown for modeling purposes Replace regular adhesive tapes with Antistatic tapes complying with EN 61340-5 All generators of electrostatic charges, such as untreated plastic films, foams, synthetic fibres, adhesive tapes, etc., must be prohibited and should be kept away from the EPA. (EN 61340-5-2 section 6)) EPA should never have any electrostatic generative adhesive tapes or labels, as these can cause very high potentials when applied or stripped off. (EN 61340-5-1 section 7.4) Note: Tape rolls may vary slightly in color Made in the Specifications and procedures subject to change without notice. United Kingdom Packaging Tape VERMASON Drawing DATE: UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, Number: HERTS, SG6 2TD UK October PHONE: +44 (0) 1462-672005 FAX: +44 (0) 1462-670440 VER-27037 2015 E-MAIL: Service Vermason.co.uk INTERNET: Vermason.co.uk 2015 VermasonX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Vermason manufacturer: Other Similar products are found below : 072425B 229765 200535 222547 222562 50424 229625 242296 210320 210300 35268 220522 242140 47200 231250 203065 237670 231288 242210 242278 242291 239260 222635 237195 203005 241090 229100 242276 230310 J6609 242271 47201 242274 230480 238711 200520 35594 35595 230660 230500 237675 211045 231275 229775 237200 229755 203015 229630 230260 200515