A. The Vermason Slim EBP Bar has been designed to be installed underneath bench tops where it will be accessible to all connecting ground cords and where it is unlikely to be knocked and damaged or hinder the operator. B. With a width of only 15mm it is especially suitable for benches with narrow edges. The product is supplied with reverse-mounted screws held in position by self-retaining washers, thereby making the installation process simple. The distance between screw centres is 89mm. The design of the ABS plastic moulding provides strength to the assembly and the rounded corners ensure comfort during use for the operator. C. Connect earthing cord to a suitable earth. A spare ring terminal is supplied if the cord needs to be shortened. D. Resistors are usually built-in to each connector. The normal earth contact is linked via individual 1M resistor rated at 1/2W. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V. The resistor is capable of withstanding 500VDC for 6 minutes. E. Per EN 61340-5-2 paragraph 5.1.1A nominal 1 megohm resistor is commonly used in wrist straps and to ground work surfaces. In the event of an operator touching an energized conductor, for the normal mains electricity supplies this resistor will limit the current flowing through the person to less than 0.5mA. Current limiting or cut-off devices should also be considered and in some areas may be demanded by legislation F. The operator connects the wriststrap to the stud via a coiled cord. A second stud can be used to connect a working surface. The third connection is available for guest use or to ground another item such as a trolley. Periodic verification of the ground path should be part of the ESD control program. Item Description 231345 Slim EBP Box with 3 x 10mm Studs 231350 Slim EBP Box with 3 x 10mm Studs, No Resistor All EBP shall be marked or labelled. (EN 61340-5-1 paragraph 4.4 Marking of EPA bonding points EBP ) 231360 Slim EBP Box with 3 x 4mm Plug Studs An easily accessible dedicated EBP EPA ground bonding point for the wrist strap shall be established adjacent to each working area, or working surface. A sufficient number of EBP shall be provided for operators and visitors. (EN 61340-5-1 section 5.3.3) Made in Britain Slim EBP Boxes VERMASON LTD. Drawing Number DATE: 1 AVENUE ONE, LETCHWORTH, HERTS, SG6 2HB UK PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 231345 May 2007 E-MAIL:Service Vermason.co.uk, INTERNET: Vermason.co.uk 2007 VERMASON LTD.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Screwdrivers, Nut Drivers & Socket Drivers category: Click to view products by Vermason manufacturer: Other Similar products are found below : 1406504-2 27850 CE-16-03400-00-HNDLE-TORQ 30246 323451-000 46722 16538 XW4Z-00B 96025 96030 96560 96703 96430 31830 92270 96012 96436 96536 92064 92008 72820 92005 76070 96520 92040 36372 96416 92024 96420 76005 96570 72823 96325 96525 96720 31832 76019 92004 76007 92069 92020 76021 96523 96510 96427 96425 96415 96320 92073 92052