173-232669 Vero

KM6-II Subracks: PCB Mounting brackets To ensure complete versatility, all card mounting brackets are supplied in a kit Note: Plastics are adversely affected by solvents and care should be taken to avoid separate to the aluminium front panel. The brackets are available in various contamination of plastic brackets. forms to suit different applications. Contents of kits Description Qty. Material Normal bracket 10 Luranyl 2452/1, green or die cast zinc Wire wrap bracket 10 Luranyl 2452/1, black VME bracket 10 Luranyl 2452/1, black Speedwire bracket 10 Aluminium extrusion Normal bracket NORMAL PCB MOUNTING BRACKETS The normal PCB mounting brackets are for use where front panels are mounted PLAN VIEW into IEC/DIN subracks and caseframes that require the conventional 2,54mm gap between the rear of the front panel and the PCB. Centre Available in two versions moulded in Noryl or zinc die-cast. The die cast version line is now tapped in both axes, making assembly easier and quicker. Optional position for 10 HP or wider Ordering information front panels Description Order code 10 brackets (plastic) and fixings 173-232669L 10 brackets (metal) and fixings 173-253258D Wirewrap PCB bracket WIREWRAP PCB MOUNTING BRACKETS The wire wrap PCB brackets are for use where the card has to be off-set to take PLAN VIEW account of the length of the wire wrap spills on the printed circuit board. The Centre line 2,54mm spacer can be removed for use with cassette modules. Ordering information Description Order code Optional position for 10 brackets and fixings 173-232670D 10 HP or wider front panels VME PCB bracket VME PCB MOUNTING BRACKETS It is possible to use two types of PCB mounting bracket with VME PCBs. The PLAN VIEW normal PCB mounting bracket (173-12525B) should be used with 4HP wide panels and the VME mounting bracket below used for 8HP wide panels enabling wire wrap spills to be utilized and still obtaining compatibility with the committed VME backplane. Ordering information Description Order code 10 brackets and fixings 173-232671B Speedwire PCB bracket SPEEDWIRE PCB MOUNTING BRACKETS It is necessary when using the Speedwire wiring system that a small off-set is PLAN VIEW obtained to account for the height of the speedwire contact on the left hand side of the PCB. Nylon washer Ordering information Description Order code Optional position for 10 pairs and fixings 173-232672L 10 HP or wider front panels Speedwire position 56 57X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vero manufacturer: Other Similar products are found below : 173-202579H 503-232983F 503-232948H 503-232971B 20-313145 16-269316 503-232963A 75-265742 75-38118 950-201784G 16- 269313 75-265739 503-232946A 20-313139 18-1657 20-313138 20-313144 75-227911 18-0222 645-10028 75-265740 01-0042 75-3019 75-227895 75-227901 503-232985B 20-313140 75-227910 503-232954B 20-313143 01-0021 20-2136 20-313137 75-2861 75-226685 950-202001E 75-2860 20-2137