ConverterPAC Description ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies. There are currently 12 ConverterPACs available for use. Most ConverterPACs of the same length are interchange- able within a MegaPAC and between different AC input MegaPAC chassis. They can be added, moved, or changed as necessary. The type of ConverterPAC used in this slot is a DualPAC. DualPAC (D = Non-RoHS GD = RoHS) The DualPAC output assembly consists of two VI-J00 DC to DC converters that con- vert the high voltage bus to the desired regulated output voltages. DualPACs can provide up to 100 Watts of output power (cannot be paralleled) per output and are fused with a single PC-Tron, DC-rated, fast-acting fuse. A passive LC filter is used to reduce output ripple/noise down to 1% typical, and 2% maximum peak- to-peak from 10% to 100% of rated load. A number of options such as the out- put voltage Trim potentiometer, and VXI options are available. The DC Power Good signal is NOT available. The DualPAC contains output overcurrent protec- tion, which recovers automatically when the overcurrent condition is removed. Overvoltage protection and overtemperature limiting are not available. Newer DualPACs have Autosense. This feature automatically locally senses the output if remote sense is not used. To check if an output has the Autosense feature, measure the impedance from the + Out to + Sense and - Out to - Sense pins. If the impedance is 5 ohms, then the output has Autosense and does not require local sense jumpers. If a unit does not have Autosense, sense connections must be made For further technical information about ConverterPACs, contact Applications Engineering at 1-800-927-9474. Options Available for DualPAC OPTIONS AVAILABILITY D Power Good NOT AVAILABLE T Trim +/-10% OPTIONAL F* Trim: +10%/-50% OPTIONAL R External RAM OPTIONAL V3 VXI Low Noise1% Vout >24V OPTIONAL V2 VXI Low Noise 50mV - Vout <= 15V OPTIONAL V1 VXI Low Noise150mV - 15V < Vout <= 24V OPTIONAL * Note: Not available for 1st Gen 10V, 12V and 15V modules. For more details, contact Factory. DualPAC Output and Connector Pin Identification J1-B-PIN1 J1 (OUTPUT CONNECTORS) MATING HDWR: Output connector kits (optional) for J2-B-PIN1 1 AND 4 +V OUT HOUSING- MOLEX P/N: 39-01-2060 4 1 your MegaPAC supply are available for TERMINALS- MOLEX P/N: 39-00-0039 5 2 2 AND 5 -V OUT purchase from Westcor: CRIMP TOOL MOLEX P/N: 11-01-0197 6 3 OUTPUT ADJ. 1 3 +R/SENSE 6 -R/SENSE J1-A-PIN1 Part Number J2 (REMOTE SENSE) Single phase input 43075 J2-A-PIN1 MATING HDWR: 1 TRIM PIN ACCESS Three phase input 43541 HOUSING- MOLEX P/N: 50-57-9403 2 + SENSE TERMINALS- MOLEX P/N: 16-02-0103 DualPAC output 19-130042 OUTPUT ADJ. 2 3 CRIMP TOOL MOLEX P/N: 11-01-0208 - SENSE ConverterPAC Family Rev. 01/2016 vicorpower.com DualPAC 800 927.9474X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Isolated DC/DC Converters category: Click to view products by Vicor manufacturer: Other Similar products are found below : ESM6D044440C05AAQ FMD15.24G PSL486-7LR Q48T30020-NBB0 JAHW100Y1 SPB05C-12 SQ24S15033-PS0S 18952 19-130041 CE-1003 CE-1004 GQ2541-7R RDS180245 MAU228 J80-0041NL DFC15U48D15 XGS-0512 XGS-1205 XGS-1212 XGS-2412 XGS- 2415 XKS-1215 06322 NCT1000N040R050B SPB05B-15 SPB05C-15 L-DA20 DCG40-5G QME48T40033-PGB0 XKS-2415 XKS-2412 XKS-1212 XKS-1205 XKS-0515 XKS-0505 XGS-2405 XGS-1215 XGS-0515 PS9Z-6RM4 73-551-5038I AK1601-9RT VI-N61-CM VI- R5022-EXWW PSC128-7iR RPS8-350ATX-XE DAS1004812 PQA30-D24-S24-DH VI-M5F-CQ VI-LN2-EW VI-PJW01-CZY