FIAM 110V Input Actual size: 2.28 x 2.2 x 0.5in S 57,9 x 55,9 x 12,7mm CUNRTL S Filter Input Attenuator Module Features & Benefits Absolute Maximum Rating RoHS Compliant (with F or G pin style) Parameter Rating Unit Notes a 154 V Continuous DC EMI filtering EN50121-3-2 +IN to IN 385 V 20ms Transient protection EN50155, +OUT to OUT 154 V Continuous DC EN50121-3-2 Mounting torque 5 0.57 in lbs N m 6 each, 4-40 or M3 Low-profile mounting options Operating temperature 55 to +100 C M-Grade 500W output power Storage temperature 65 to +125 C M-Grade 60950-1 compliance 500 260 F C <5sec wave solder Pin soldering temperature Mini-size package 750 390 F C <7sec hand solder Inrush current limiting Thermal Resistance Product Highlights Parameter Min Typ Max Unit The FIAM110 is a DC front-end module Baseplate to sink designed for rail applications providing flat, greased surface 0.16 C/Watt transient protection, inrush current limiting and EMI filtering (EN50121-3-2) in a Mini-size thermal pad (P/N 20264) 0.14 C/Watt package. The FIAM enables designers using Baseplate to ambient Vicor 110V Mini, Micro or Maxi or VI/VE-200 IN Free Convection 8.0 C/Watt and VI/VE-J00 (T input) DC-DC converters 1000LFM 1.9 C/Watt to meet the transient immunity and EMI requirements required for the rail industry and protect system hardware from inrush Part Numbering current. The FIAM110 accepts an input voltage of 66154V and provide up to 500W of DC output power and remote on/off control. FIAM 110 C 1 1 The FIAM110 is housed in an industry standard half brick module measuring 110V Pin Style Baseplate Product IN Product Grade Temperatures (C) Nominal 1 = Short Pin 2.28x2.2x0.5in and depending upon model 1 = Slotted Grade Operating Storage 2 = Long Pin 2 = Threaded E = 10 to +100 20 to 125 selected, may be mounted onboard or inboard S = Short ModuMate 3 = Thru hole C = 20 to +100 40 to 125 N = Long ModuMate for height-critical applications. T = 40 to +100 40 to 125 F = Short RoHS H = 40 to +100 55 to 125 G = Long RoHS M = 55 to +100 65 to 125 b K = Extra Long RoHS Compatible Products Mini, Micro, Maxi 110V Input b Not intended for socket or Surfmate mounting DC-DC converters VI / VE-200, VI / VE-J00 (T input) a EMI performance is subject to a wide variety of external influences such as PCB construction, circuit layout etc. As such, external components in addition to those listed herein may be required in specific instances to gain full compliance to the standards specified. Note: Product images may not highlight current product markings. FIAM Rev 2.0 Page 1 of 6 11/2021110V Input Specifications (Typical at T = 25C, nominal line and 75% load, unless otherwise specified.) BP Input Specifications Parameter Min Typ Max Unit Notes Input voltage 66 110 154 V Continuous DC Inrush limiting 0.06 A/F Transient immunity 176 V Consistent with 100ms per NF F 01-510 DC 165 V Consistent with 1s per RIA 12 DC 385 V Consistent with 20ms per RIA 12 DC Output Specifications Parameter Min Typ Max Unit Notes Output power 500 W Output power derates linearly below 77V to 400W 66V IN IN Efficiency 98 % Internal Voltage Drop 2.5 V 500W at 25C baseplate External capacitance 100 F Control Pin Specifications Parameter Min Typ Max Unit Notes ON / OFF control Enable (ON) 0.0 1.0 V Referenced to V DC OUT Disable (OFF) 3.5 5.0 V 100k internal pull-up resistor DC EMI Standard Notes EN50121-3-2 150kHz to 500kHz - 99dBV quasi-peak 500kHz to 30MHz - 93dBV quasi-peak EMI performance is subject to a wide variety of external influences such as PCB construction, circuit layout etc. As such, external components in addition to those listed herein may be required in specific instances to gain full compliance to the standards specified. Immunity Parameter Typ. Value Units Notes EN50121-3-2 (Table 7.3 Surges) 2,000 V Waveform 1.2 / 50s, 42, 0.5F, line to ground DC 1,000 V Waveform 1.2 / 50s, 42, 0.5F, line to line DC Performance Criteria B - no damage to the product but a temporary change in the intended DC voltage is acceptable as long as it self-recovers without user intervention. EN50121-3-2 (Table 7.2 Fast Transients) 2,000 V 5/50ns, 5kHz DC Performance Criteria A - no damage to the product and no change to the intended DC voltage level for a duration greater than 1.0sec. EN50121-3-2 (Table 7.1 RF Common Mode) 0.15 to 80MHz, 10V , 80% AM, 1kHz RMS Performance Criteria A - no damage to the product and no change to the intended DC voltage level greater than +/-5%. Safety Specifications Parameter Min Typ Max Unit Notes 1,000 V RMS Dielectric withstand (I/O to baseplate) 1,414 V DC FIAM Rev 2.0 Page 2 of 6 11/2021