End of Life Military COTS 28V Filter IN M-FIAM7 Example Model Number M-FIAM7M21 Actual size: 2.28 x 2.2 x 0.5in 57,9 x 55,9 x 12,7mm Input Attenuator Module Features & Benefits Absolute Maximum Rating b EMI filtering: MIL-STD-461E Parameter Rating Unit Notes 50 V Continuous DC Transient protection: +IN to IN 100 V See Figure 1 MIL-STD-1275A/B/D, DC MIL-STD-704A-F and Mounting torque 5 0.57 in lbs N m 6 each, 4-40 or M3 DO-160E 500 260 F C <5sec wave solder Pin soldering temperature Environments: MIL-STD-810, 750 390 F C <7sec hand solder MIL-STD- 202 Environmental stress screening Thermal Resistance and Capacity Low-profile mounting options Output power up to 130W Parameter Min Typ Max Unit Output current up to 10A Baseplate to sink flat, greased surface 0.16 C/Watt Mini-sized package with thermal pad (P/N 20264) 0.1 C/Watt Inrush current limiting Baseplate to ambient Free convection 7.9 C/Watt 1000LFM 2.2 C/Watt Product Highlights The M-FIAM7 is a DC front-end module that provides EMI filtering and transient protection. MTBF per MIL-HDBK-217F (M-FIAM7M21) The M-FIAM7 enables designers using Vicor 28V DC-DC VI Chip modules to meet Temperature Environment MTBF Unit conducted emission/conducted susceptibility 25C Ground Benign: G.B. 3,540 1,000Hrs per MIL-STD-461E and input transients per 50C Naval Sheltered: N.S. 637 1,000Hrs MIL-STD-1275A/B/D, MIL-STD-704A-F and 65C Airborne Inhabited Cargo: A.I.C. 499 1,000Hrs DO-160E. The M-FIAM7 accepts an input voltage of 14 50V and delivers output DC current up to 10A. Part Numbering M-FIAM7 is housed in an industry standard half-brick module measuring M-FIAM7 M 2 1 2.28x2.2x0.5in and depending upon model selected, may be mounted onboard or inboard Baseplate Product Grade Temperatures (C) Pin Style for height-critical applications. Product 1 = Short Pin 1 = Slotted Grade Operating Storage 2 = Long Pin 2 = Threaded H = 40 to +100 55 to +125 a S = Short ModuMate 3 = Thru hole M = 55 to +100 65 to +125 a N = Long ModuMate Compatible Products F = Short RoHS G = Long RoHS c K = Extra Long RoHS 28V Input DC-DC VI Chip modules Note: This product is not compatible with Maxi, Mini, Micro DC-DC converters. a Compatible with SurfMate and InMate socketing system b EMI performance is subject to a wide variety of external influences such as PCB construction, circuit layout etc. As such, external components in addition to those listed herein may be required in specific instances to gain full compliance to the standards specified. c Not intended for socket or Surfmate mounting Note: Product images may not highlight current product markings. M-FIAM7 Rev 3.3 Page 1 of 6 02/2020M-FIAM7M21 End of Life Specifications Typical at T = 25C, nominal line and 75% load, unless otherwise specified. BP Input Specifications Parameter Min Typ Max Unit Notes Input voltage 14 28 50 V Continuous DC Inrush limiting 0.007 A/F 100 V 50ms per MIL-STD-1275A/B/D, continuous operation DC 250 V 70s per MIL-STD-1275B, continuous operation DC Transient immunity 70 V 20ms per MIL-STD-704A, continuous operation DC 80 V 100ms per DO-160E, Section 16, Power Input, Category Z DC Output Specifications Parameter Min Typ Max Unit Notes Output current 10 A Over continuous input and temp. range (see Figure 4) Output power 130 W Transient compliance over temp. range (see Figure 6) Efficiency 96 98 % Internal voltage drop 0.5 0.7 V 10A, 100C baseplate External capacitance See illustration C1 on page 4 330 1000 F 63V Control Pin Specifications Parameter Min Typ Max Unit Notes ON/OFF control Enable (ON) 0.0 1.0 V Referenced to V DC OUT Disable (OFF) 4.0 5.50 V 100k internal pull-up resistor DC Safety Specifications Parameter Min Typ Max Unit Notes 1,500 V Input/Output to Base RMS Dielectric withstand 2,121 V Input/Output to Base DC EMI Standard Test Procedure Notes MIL-STD-461E Conducted emissions: CE101, CE102 Conducted susceptibility: CS101, CS114, CS115, CS116 EMI performance is subject to a wide variety of external influences such as PCB construction, circuit layout etc. As such, external components in addition to those listed herein may be required in specific instances to gain full compliance to the standards specified. General Specifications Parameter Min Typ Max Unit Notes Weight 3.3 94 Ounces grams Warranty 2 Years M-FIAM7 Rev 3.3 Page 2 of 6 02/2020