DC-DC Converters MI-J00 10 to 50 Watts Features & Benefits Packaging Options Inputs: Standard: Slotted baseplate 28V per MIL-STD-704D/E/F DC 155V per MIL-STD-1399A DC SlimMod: Flangeless baseplate, option suffix: - S 270V per MIL-STD-704D/E/F DC Example: MI - JXX - XX - S Single output: 2 48V DC FinMod: Finned heat sink, option suffix: 3 Up to 23W/in - F1, -F2, -F3 and - F4 MIL-STD-810 environments Examples: Up to 90% efficiency MI - JXX - XX -F1, 0.25 fins, longitudinal MI - JXX - XX -F2, 0.50 fins, longitudinal Remote sense MI - JXX - XX -F3, 0.25 fins, transverse Current limit MI - JXX - XX -F4, 0.50 fins, transverse ZCS power architecture Low noise FM control Converter Selection Chart Size: 2.28 x 2.4 x 0.5 (57,9 x 61,0 x 12,7mm) MI-J Semi-custom modules available, consult factory. Product Highlights Input Voltage The MI-J00 family of DC-DC converters is designed for applications utilizing distributed a Nominal Range Transient Notes power architectures. Based on Vicors VI-200 b 2 = 28V 18 50V 60V 28V input per MIL-STD 704D/E/F / VI-J00 family of zero-current switching, DC component-level DC-DC converters, the MI-J00 5 = 155V 100 210V 230V 155V input per MIL-STD-1399A DC family offers exceptional performance in terms c 6 = 270V 125 400V 475V 270V input per MIL-STD-704D/E/F DC of power density, efficiency, noise, ease of use, and reliability. 7 = 165V 100 310V n/a The MI-J00 family meets the steady-state input a Transient voltage for 1 second. voltage requirements of MIL-STD-704D/E/F for b 16V operation at 75% load. c the 28V (MI-J2X) and 270V input (MI-J6X). DC DC These units rated at 75% load from 125 150V : MI-J6Z-xY, MI-J6Y-xY, MI-J60-xY IN The 155V input (MI-J5X) meets MIL-STD-1399A. DC When used with the MI-IAM input attenuator module, the 28V or 270V input MI-J00 converter Output Voltage Product Grade Temperatures (C) meets the transient and spike requirements of MIL-STD-704, MIL STD-1275, and DO-160. Please Operating Storage Z = 2.0V 1 = 12V refer to the MI-IAM data sheet for details. I = 40 to +100 I = 55 to +125 Y = 3.3V P = 13.8V The output voltage can be externally trimmed M = 55 to +100 M = 65 to +125 0 = 5.0V 2 = 15V or programmed from 50% to 110% of nominal output. Current limiting, remote sense, and an X = 5.2V N = 18.5V inhibit pin all combine to offer a high degree of W = 5.5V 3 = 24V Output Power/Current V protection, versatility, and reliability for OUT V = 5.8V L = 28V power systems. 5V <5V T = 6.5V J = 36V Fully encapsulated in Vicors industry standard A = 10W A = R = 7.5V K = 40V package, the MI-J00 family meets MIL-STD-810 Z = 25W Z = 5A environmental testing requirements for humidity, M = 10V 4 = 48V Y = 50W Y = 10A fungus, salt-fog, explosive atmosphere, acceleration, vibration, and shock. MI-J00 DC-DC Converters Rev 1.4 vicorpower.com Page 1 of 7 06/2017 800 927.9474MI-J00 Converter Specifications (Typical at T =25C, nominal line and 75% load, unless otherwise specified) BP Input Specifications Parameter Min Typ Max Units Test Conditions -6 -6 Inrush charge 60 x 10 100 x 10 Coulombs Nominal line Input reflected 10% I Nominal line, full load IN ripple current pp V IN 30+20 Log ( ) dB 120Hz, nominal line V OUT Input ripple rejection V IN 20+20 Log dB 2400Hz, nominal line ( ) V OUT No load power dissipation 1.35 2 Watts Output Characteristics Parameter Min Typ Max Units Test Conditions Setpoint accuracy 0.5 1 %V NOM 0.05 0.2 %V LL to HL, 10% to Full Load NOM Load/line regulation 0.2 0.5 %V LL to HL, No Load to 10% NOM Output temperature drift 0.01 0.02 % / C Over rated temperature Long term drift 0.02 %/1K hours 100 150 mV Whichever is greater Output ripple pp 20MHz bandwidth 1.0 1.5 %V NOM a Trim range 50 110 %V NOM Total remote 0.5 Volts sense compensation Current limit 105 125 %I Automatic restart NOM Short circuit current 105 130 %I NOM a 10V to 15V outputs, standard trim range 10%. Consult factory for wider trim range. Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 5. Control Pin Specifications Parameter Min Typ Max Units Test Conditions Gate out impedance 50 Gate in impedance 1000 Gate in high threshold 6 Volts Use open collector Gate in low threshold 0.65 Volts Gate in low current 6 mA MI-J00 DC-DC Converters Rev 1.4 vicorpower.com Page 2 of 7 06/2017 800 927.9474