MI-ComPAC DC-DC Switchers 50 300 Watts 1 3 Outputs Features & Benefits Configuration Chart Number of Inputs 28 and 270V DC Configuration Output Power Dimensions Modules Transient protection: 28V designed DC Single Output to meet MIL-STD-704A-F, 8.6 x 2.5 x 0.99in MI-LC 50 100W 1 MIL-STD-1275A/B/D and DO-160E 218,4 x 63,5 x 25,2mm F A 8.6 x 4.9 x 0.99in One, two or three outputs MI-MC 150 200W 2 218,4 x 124,5 x 25,2mm FFF AAA F A Outputs: 2 48V DC 8.6 x 7.3 x 0.99in MI-NC 300W 3 FFF AAA 218,4 x 185,4 x 25,2mm 3 Up to 5W/in A F Dual Output High efficiency FFF AAA 8.6 x 4.9 x 0.99in MI-PC 100 200W 2 218,4 x 124,5 x 25,2mm Remote sense F FA A 8.6 x 7.3 x 0.99in MI-QC 200 300W 3 ZCS power architecture 218,4 x 185,4 x 25,2mm FF FFAA AA F A F A Triple Output Low noise FM control FF FFAA AA 8.6 x 7.3 x 0.99in MI-RC 150 300W 3 MIL-STD-461C/D/E EMI compliance 218,4 x 185,4 x 25,2mm F FA FA A InpFFutFA VAFFAolAtAage Output Voltage Product Description b Z = 2V 1 = 12V Input Range Brownout Transient The MI-ComPAC is a complete single, b Nominal Y = 3.3V P = 13.8V a Full Power Voltage (1s) dual, or triple output DC-DC power supply b F A F A 0 = 5V 2 = 15V that delivers up to 300W from inputs 2 = 28V 18 50V 16 60 X = 5.2V N = 18.5V of 28 or 270V . DC 6 = 270V 125 400V N/A 475 W = 5.5V 3 = 24V The MI-ComPAC meets the conducted V = 5.8V L = 28V emissions and conducted susceptibility c Product Grade Case Temps. C T = 6.5V J = 36V specifications of MIL-STD-461C/D/E and c R = 7.5V K = 40V designed to meet the input transient, Grade Operating Storage surge, and spike protection to the M = 10V 4 = 48V I = 40 to +85 55 to +100 most severe levels of MIL-STD-1275, F A M = 55 to +85 65 to +100 MIL-STD-704 and DO-160E. Output Power / Current Over/undervoltage lockout provides an V 5V V < 5V OUT OUT Output Power / Current F A additional safeguard against potentially V = 150W V = 30A damaging line conditions. The MI-ComPAC V 5V V < 5V OUT OUT A F U = 200W U = also features a overall disable. Y = 50W Y = 10A S = 300W S = 60A X = 75W X = 15A Packaging Options W = 100W W = 20A Output Power / Current V = V = 30A Conduction Cooled Models Available. V 5V V < 5V Add CC to the end of the part number. OUT OUT F A (Consult factory for details.) S = 300W S = P = P = 90A Extended heat sink available add H1 to end of part number. a Brownout voltage for output power de-rated to 75% of maximum b These units rated for 75% load from 125 to 150V: V power for Z & Y voltages, W power for 0 voltages c 75W maximum module power for 28V input voltage MI-ComPAC DC-DC Rev 1.6 Page 1 of 6 11/2020MI-ComPAC DC-DC Switchers MI-ComPAC Specifications Typical at T = 25C, nominal line and 75% load, unless otherwise specified. BP Input Specifications Parameter Min Typ Max Unit Notes 28V Input Modules DC Steady-State Input 18 28 50 V DC Low-Line Lockout 17.5 V Automatic recovery DC Input Spike Limit 250 +250 V 70s, 15mJ per MIL-STD-1275A/B/D DC 100 V 50ms, 0.5 per MIL-STD-1275A/B/D DC Input Surge Limit 80 V 100ms per DO-160E, Section 16, Power Input, Category Z DC Overvoltage Shut Down 50 V 100ms automatic recovery DC d Recommended Fuse 10 A F03A type 270V Input Modules DC Steady-State Input 125 270 400 V DC Low-Line Lockout 125 V Automatic recovery DC +800 V 10s, 50 DC Input Spike Limit 600 +600 V 100s, 15mJ DC Input Surge Limit 250 500 V 100ms, 0.5 DC Overvoltage Shut Down 400 V 100s automatic recovery DC d Recommended Fuse 2 A F03A type All Models d d No Load Power Dissipation 1.5 2 W e Overall Disable Input Current 4 mA Sink disables all outputs (Absolute Maximum, 20mA) Inrush Current 110 125 %, I Steady state I , 10ms IN IN d Per internal module configuration. e Multiply minimum x2 for 2-ups and x3 for 3-ups Output Specifications Parameter Min Typ Max Unit Notes Set Point Accuracy 0.5 1.0 %V NOM 0.2 0.5 %V LL to HL, NL to 10% NOM Load / Line Regulation 0.05 0.2 %V LL to HL, 10% to FL NOM Output Temperature Drift 0.01 0.02 % / C 1.0 1.5 %V NOM Output Noise, Peak-to-Peak Whichever is greater 20MHz BW 100 150 mV f Output Voltage Trimming 50 110 %V NOM Remote Sense Compensation 0.5 V DC OVP Set Point 115 125 135 %V Latching NOM Current Limit 105 125 %I Auto restart NOM g Short-Circuit Current 20 130 %I NOM f 10, 12 and 15V outputs, standard trim range 10%. Consult factory for wider trim range. g Output ranges of 5V or less incorporate foldback current limiting, outputs of 10V and above incorporate straight-line current limiting. MI-ComPAC DC-DC Rev 1.6 Page 2 of 6 11/2020