Mini Family 110V Input Actual size: 2.28 x 2.2 x 0.5in S 57,9 x 55,9 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications Railway/Transportation system applications including communications systems, DC input range: 66 154V (continuous) information display, lighting, control systems, ticket machines, passenger entertainment, Isolated input public address systems, door control, industrial power systems and power Encapsulated circuitry for shock and generation systems. vibration resistance For details on proper operation please refer to the: Extended temperature range Design Guide & Applications Manual for Maxi, Mini, Micro Family. (55 to +100C) Input surge withstand: 250V for 100ms DC output: 3.3 48V Absolute Maximum Ratings Programmable output: 10 110% Regulation: 0.2% no load to full load Parameter Rating Unit Notes Efficiency: Up to 90% +IN to IN voltage 0.5 to +260 V DC Maximum operating temp: 100C, PC to IN voltage 0.5 to +7.0 V DC full load PR to IN voltage 0.5 to +7.0 V DC Power density: up to 80W per cubic inch SC to OUT voltage 0.5 to +1.5 V DC Height above board: 0.43in 10,9mm Sense to OUT voltage 1.0 V DC Parallelable, with N+M fault tolerance Isolation voltage Low-noise ZCS/ZVS architecture IN to OUT 3000 V Test voltage RMS RoHS Compliant (with F or G pin option) IN to base 1500 V Test voltage RMS OUT to base 500 V Test voltage RMS Product Overview Operating Temperature 55 to +100 C M-Grade Storage Temperature 65 to +125 C M-Grade These DC-DC converter modules use advanced 500 260 F C <5sec wave solder power processing, control and packaging Pin soldering temperature technologies to provide the performance, 750 390 F C <7sec hand solder flexibility, reliability and cost effectiveness of a Mounting torque 5 0.57 in lbs N m 6 each mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V110B24C200BL 110B B Product Type Output Volt- Product Grade Temperatures (C) Output Power Pin Style Finish Baseplate age Blank: Slotted Grade Operating Storage V P Blank: Short Tin/Lead V = Standard OUT OUT 3V3 = 3.3V 2: Threaded S = Enhanced E = 10 to +100 20 to +125 3.3V 75W, 100W L: Long Tin/Lead efficiency 5 = 5V 3: Through-hole C = 20 to +100 40 to +125 5V 100W, 150W S: Short ModuMate Gold (avail. 12 8 = 8V T = 40 to +100 40 to +125 8V 150W N: Long ModuMate Gold V only) OUT H = 40 to +100 55 to +125 12V 150W, 200W F: Short RoHS Gold 12 = 12V M = 55 to +100 65 to +125 15V 150W, 200W G: Long RoHS Gold 15 = 15V 24V 150W, 200W K: Extra Long RoHS Gold 24 = 24V 28V 150W, 200W 28 = 28V 36V 150W, 200W 36 = 36V 48V 150W, 200W 48 = 48V Note: Product images may not highlight current product markings. 110V Mini Family Rev 3.8 Page 1 of 14 07/2019110V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 66 110 154 V Per EN50155 and GBT-25119 DC Input surge withstand 250 V <100ms DC Undervoltage turn-on 64 65.4 V DC Undervoltage turn-off 54 56 V DC Overvoltage turn-off/on 155.5 161.7 169.4 V DC Disabled input current 1.3 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % / C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% Programming range 10 110 % of nominal, a minimum load of 10% of maximum rated power may be required. +OUT to OUT, +Sense to OUT Absolute Maximum Ratings 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.4 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 9. Thermal Resistance and Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.16 C/Watt Baseplate to sink thermal pad (P/N 20264) 0.14 C/Watt Baseplate to ambient 8.0 C/Watt Baseplate to ambient 1000LFM 1.9 C/Watt Thermal capacity 83 Watt-sec/C 110V Mini Family Rev 3.8 Page 2 of 14 07/2019