V150C15M150BL Vicor

Micro Family 150V Input Actual size: 2.28 x 1.45 x 0.5in S 57,9 x 36,8 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications DC input range: 100 200V Communications, control systems, medical, instrumentation, defense and aerospace. Isolated output For details on proper operation please refer to the: Encapsulated circuitry for shock and Design Guide & Applications Manual for Maxi, Mini, Micro Family. vibration resistance Extended temperature range (55 to +100C) Absolute Maximum Ratings Input surge withstand: 250V for 100ms DC output: 3.3 48V Parameter Rating Unit Notes Programmable output: 10 110% +IN to IN voltage 0.5 to +260 V DC Regulation: 0.2% no load to full load PC to IN voltage 0.5 to +7.0 V DC Efficiency: Up to 88% PR to IN voltage 0.5 to +7.0 V DC Maximum operating temp: 100C, SC to OUT voltage 0.5 to +1.5 V DC full load Isolation voltage Power density: up to 91W per cubic inch IN to OUT 3000 V Test voltage RMS Height above board: 0.43in 10,9mm IN to base 1500 V Test voltage RMS Parallelable, with N+M fault tolerance OUT to base 500 V Test voltage RMS Low-noise ZCS/ZVS architecture Operating Temperature 55 to +100 C M-Grade RoHS Compliant (with F or G pin option) Storage Temperature 65 to +125 C M-Grade 500 260 F C <5 sec wave solder Pin soldering temperature Product Overview 750 390 F C <7 sec hand solder These DC-DC converter modules use advanced Mounting torque 5 0.57 in lbs N m 6 each power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V150C12C150BL V150C B Baseplate Product Grade Temperatures (C) Output Power Pin Style Finish Output Voltage Blank: Slotted Grade Operating Storage V P Blank: Short Tin/Lead OUT OUT 3V3 = 3.3V 2: Threaded 5 = 5V E = 10 to +100 20 to +125 3.3V 75W L: Long Tin/Lead 3: Through-hole 8 = 8V C = 20 to +100 40 to +125 5V 100W S: Short ModuMate Gold 12 = 12V T = 40 to +100 40 to +125 8V 100W N: Long ModuMate Gold 15 = 15V H = 40 to +100 55 to +125 12V 150W F: Short RoHS Gold 24 = 24V M = 55 to +100 65 to +125 15V 150W G: Long RoHS Gold 28 = 28V 24V 150W K: Extra Long RoHS Gold 36 = 36V 28V 150W 48 = 48V 36V 150W 48V 150W Note: Product images may not highlight current product markings. 150V Micro Family Rev 3.4 Page 1 of 11 02/2021150V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 100 150 200 V DC Input surge withstand 250 V <100ms DC Undervoltage turn-on 97.0 99.0 V DC Undervoltage turn-off 81.9 84.9 V DC Overvoltage turn-off/on 201.9 210 220 V DC Disabled input current 1.1 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % / C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% Programming range 10 110 % of nominal, a minimum load of 10% of maximum rated power may be required. +OUT to OUT Absolute Maximum Ratings 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.4 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 6. Thermal Resistance and Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.24 C/Watt Baseplate to sink thermal pad (P/N 20265) 0.21 C/Watt Baseplate to ambient 10.9 C/Watt Baseplate to ambient 1000LFM 2.8 C/Watt Thermal capacity 48 Watt-sec/C 150V Micro Family Rev 3.4 Page 2 of 11 02/2021