Micro Family 24V Input Actual size: 2.28 x 1.45 x 0.5in S 57,9 x 36,8 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications DC input range: 18 36V Industrial and process control, distributed power, medical, ATE, communications, defense and aerospace. Isolated output For details on proper operation please refer to the: Operation to 16V at 75% power Design Guide & Applications Manual for Maxi, Mini, Micro Family. after start up Input surge withstand: 50V for 100ms Absolute Maximum Ratings DC output: 3.3 48V Programmable output: 10 110% Parameter Rating Unit Notes Regulation: 0.4% no load to full load +IN to IN voltage 0.5 to +53 V DC Efficiency: Up to 89% PC to IN voltage 0.5 to +7.0 V DC Maximum operating temp: 100C, PR to IN voltage 0.5 to +7.0 V DC full load SC to OUT voltage 0.5 to +1.5 V DC Power density: up to 91W per cubic inch Isolation voltage Height above board: 0.43in 10,9mm IN to OUT 3000 V Test voltage RMS Parallelable, with N+M fault tolerance IN to base 1500 V Test voltage RMS Low-noise ZCS/ZVS architecture OUT to base 500 V Test voltage RMS RoHS Compliant (with F or G pin option) Operating Temperature 55 to +100 C M-Grade Storage Temperature 65 to +125 C M-Grade Product Overview 500 260 F C <5 sec wave solder Pin soldering temperature 750 390 F C <7 sec hand solder These DC-DC converter modules use advanced power processing, control and Mounting torque 5 0.57 in lbs N m 6 each packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V24C12T100BL2 24C B Output Power Pin Style Finish Baseplate Product Grade Temperatures (C) Product Type Output Voltage V P OUT OUT Blank: Short Tin/Lead Blank: Slotted Grade Operating Storage V = Standard 3V3 = 3.3V L: Long Tin/Lead 3.3V 75W, 50W 2: Threaded E = 10 to +100 20 to +125 S = Enhanced 5 = 5V S: Short ModuMate Gold C = 20 to +100 40 to +125 5V 125W, 100W, 50W 3: Through-hole efficiency 8 = 8V N: Long ModuMate Gold T = 40 to +100 40 to +125 (avail. 12 8V 100W 12 = 12V F: Short RoHS Gold H = 40 to +100 55 to +125 V only) OUT 15 = 15V 12V 150W, 100W, 50W G: Long RoHS Gold M = 55 to +100 65 to +125 24 = 24V K: Extra Long RoHS Gold 15V 150W, 100W, 50W 28 = 28V 24V 150W,100W, 50W 36 = 36V 28V 150W, 100W, 50W 48 = 48V 36V 100W, 50W 48V 150W, 100W, 50W Note: Product images may not highlight current product markings. 24V Micro Family Rev 6.9 Page 1 of 15 02/202124V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 18 24 36 V DC Input surge withstand 50 V <100ms DC Undervoltage turn-on 17.5 17.9 V DC Modules will operate to 16V after startup at >17.9V. IN V DC Below 18V, available power is reduced to 75% of max Undervoltage turn-off 14.8 15.3 rating. Overvoltage turn-off/on 36.3 37.8 39.6 V DC Disabled input current 4.0 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % /C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% 10 110 of nominal, a minimum load of 10% of maximum Programming range % rated power may be required. +OUT to OUT Absolute Maximum Ratings 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.1 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 10. Thermal Resistance And Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.24 C/Watt Baseplate to sink thermal pad (P/N 20265) 0.21 C/Watt Baseplate to ambient 10.9 C/Watt Baseplate to ambient 1000LFM 2.8 C/Watt Thermal capacity 48 Watt-sec/C 24V Micro Family Rev 6.9 Page 2 of 15 02/2021