Micro Family 24V Input Actual size: S 2.28 x 1.45 x 0.5in 57,9 x 36,8 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications DC input range: 18 36V Industrial and process control, distributed power, medical, ATE, communications, defense and aerospace. Isolated output For details on proper operation please refer to the: Operation to 16V at 75% power Design Guide & Applications Manual for Maxi, Mini, Micro Family. after startup Input surge withstand: 50V for 100ms DC output: 3.3 48V Absolute Maximum Ratings Programmable output: 10 to 110% Regulation: 0.4% no load to full load Parameter Rating Unit Notes Efficiency: Up to 89% +IN to -IN voltage -0.5 to +53 V DC Maximum operating temp: 100C, PC to -IN voltage -0.5 to +7.0 V DC full load PR to -IN voltage -0.5 to +7.0 V DC Power density: up to 91W per cubic inch SC to -OUT voltage -0.5 to +1.5 V DC Height above board: 0.43in. (10,9mm) Isolation voltage Parallelable, with N+M fault tolerance IN to OUT 3000 V Test voltage RMS Low noise ZCS/ZVS architecture IN to base 1500 V Test voltage RMS RoHS Compliant (with F or G pin option) OUT to base 500 V Test voltage RMS Operating Temperature -55 to +100 C M-Grade Product Overview Storage Temperature -65 to +125 C M-Grade 500 (260) F (C) <5 sec wave solder These DC-DC converter modules use Pin soldering temperature advanced power processing, control and 750 (390) F (C) <7 sec hand solder packaging technologies to provide the Mounting torque 5 (0.57) in-lbs (N-m) 6 each performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V24C12T100BL2 24C B Product Grade Temperatures (C) Pin Style Finish Baseplate Output Power Product Type Output Voltage V P Blank: Slotted Grade Operating Storage OUT OUT Blank: Short Tin/Lead V = Standard 3V3 = 3.3V 2: Threaded E = - 10 to +100 - 20 to +125 3.3V 75W, 50W L: Long Tin/Lead S = Enhanced 5 = 5V 3: Through-hole C = - 20 to +100 - 40 to +125 5V 125W, 100W, 50W S: Short ModuMate Gold efficiency 8 = 8V (avail. 12 8V 100W 12 = 12V T = - 40 to +100 - 40 to +125 N: Long ModuMate Gold V only) OUT 15 = 15V 12V 150W, 100W, 50W H = - 40 to +100 - 55 to +125 F: Short RoHS Gold 24 = 24V 15V 150W, 100W, 50W M = - 55 to +100 - 65 to +125 G: Long RoHS Gold 28 = 28V 24V 150W,100W, 50W K: Extra Long RoHS Gold 36 = 36V 28V 150W, 100W, 50W 48 = 48V 36V 100W, 50W 48V 150W, 100W, 50W 24V Micro Family Rev 6.5 vicorpower.com Page 1 of 15 06/2017 800 927.947424V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. MODULE INPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes Operating input voltage 18 24 36 V DC Input surge withstand 50 V <100ms DC Undervoltage turn-on 17.5 17.9 V DC Modules will operate to 16V after startup at >17.9V. IN V Below 18V, available power is reduced to 75% of max Undervoltage turn-off 14.8 15.3 DC rating. Overvoltage turn-off/on 36.3 37.8 39.6 V DC Disabled input current 4.0 mA PC pin low MODULE OUTPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes Output voltage setpoint 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % /C Over operating temperature range Power sharing accuracy 2 5 % 10 to 100% of full load Of nominal output voltage. For trimming below 90% 10 110 of nominal, a minimum load of 10% of maximum Programming range % rated power may be required. +OUT to OUT Absolute Maximum Ratings 3.3V -0.5 to 4.7 V Externally applied DC 5V -0.5 to 7.0 V Externally applied DC 8V -0.5 to 10.9 V Externally applied DC 12V -0.5 to 16.1 V Externally applied DC 15V -0.5 to 20.0 V Externally applied DC 24V -0.5 to 31.7 V Externally applied DC 28V -0.5 to 36.9 V Externally applied DC 36V -0.5 to 47.1 V Externally applied DC 48V -0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 10. THERMAL RESISTANCE AND CAPACITY Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.24 C/Watt Baseplate to sink thermal pad (P/N 20265) 0.21 C/Watt Baseplate to ambient 10.9 C/Watt Baseplate to ambient 1000LFM 2.8 C/Watt Thermal capacity 48 Watt-sec/C 24V Micro Family Rev 6.5 vicorpower.com Page 2 of 15 06/2017 800 927.9474