Micro Family 300V Input Actual size: 2.28 x 1.45 x 0.5in S 57,9 x 36,8 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications Off-line systems with auto-ranging or PFC front ends, industrial and process control, DC input range: 180 375V distributed power, medical, ATE, communications, defense and aerospace. Isolated output For details on proper operation please refer to the: Input surge withstand: 400V for 100ms Design Guide & Applications Manual for Maxi, Mini, Micro Family. DC output: 3.3 48V Programmable output: 10 110% Regulation: 0.5% no load to full load Absolute Maximum Ratings Efficiency: Up to 90% Maximum operating temp: 100C, Parameter Rating Unit Notes full load +IN to IN voltage 0.5 to +410 V DC Power density: up to 90W per cubic inch PC to IN voltage 0.5 to +7.0 V DC Height above board: 0.43in 10,9mm PR to IN voltage 0.5 to +7.0 V DC Parallelable, with N+M fault tolerance SC to OUT voltage 0.5 to +1.5 V DC Low-noise ZCS/ZVS architecture Isolation voltage IN to OUT 3000 V Test voltage RoHS Compliant (with F or G pin option) RMS IN to base 1500 V Test voltage RMS Product Overview OUT to base 500 V Test voltage RMS Operating Temperature 55 to +100 C M-Grade These DC-DC converter modules use advanced Storage Temperature 65 to +125 C M-Grade power processing, control and packaging technologies to provide the performance, Pin soldering temperature 500 260 F C <5sec wave solder flexibility, reliability and cost effectiveness of a Pin soldering temperature 750 390 F C <7sec hand solder mature power component . Mounting torque 5 0.57 in lbs N m 6 each High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V300C12T150BL2 300C B Product Grade Temperatures (C) Output Power Pin Style Finish Baseplate Product Type Output Voltage V P OUT OUT Blank: Slotted Grade Operating Storage Blank: Short Tin/Lead 2 = 2V V = Standard 2: Threaded 2V 50W E = 10 to +100 20 to +125 L: Long Tin/Lead 3V3 = 3.3V S = Enhanced 3: Through-hole 3.3V 75W, 50W C = 20 to +100 40 to +125 S: Short ModuMate Gold 5 = 5V efficiency 5V 100W, 50W T = 40 to +100 40 to +125 N: Long ModuMate Gold 8 = 8V (avail. 12 8V 100W H = 40 to +100 55 to +125 F: Short RoHS Gold 12 = 12V V only) OUT 12V 150W, 75W M = 55 to +100 65 to +125 G: Long RoHS Gold 15 = 15V 15V 150W, 75W K: Extra Long RoHS Gold 24 = 24V 24V 150W, 75W 28 = 28V 28V 150W, 75W 36 = 36V 36V 150W, 75W 48 = 48V 48V 150W, 75W Note: Product images may not highlight current product markings. 300V Micro Family Rev 10.6 Page 1 of 14 02/2021300V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 180 300 375 V DC Input surge withstand 400 V <100ms DC Undervoltage turn-on 174.6 178.2 V DC Undervoltage turn-off 147.4 152.8 V DC Overvoltage turn-off/on 378.7 393.8 412.6 V DC Disabled input current 1.2 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % / C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% 10 110 of nominal, a minimum load of 10% of maximum Programming range % rated power may be required. +OUT to OUT Absolute Maximum Ratings 2V 0.5 to 3.1 V Externally applied DC 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.1 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 9. Thermal Resistance and Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.24 C/Watt Baseplate to sink thermal pad (P/N 20265) 0.21 C/Watt Baseplate to ambient 10.9 C/Watt Baseplate to ambient 1000LFM 2.8 C/Watt Thermal capacity 48 Watt-sec/C 300V Micro Family Rev 10.6 Page 2 of 14 02/2021