Alternating Input Module VI-AIM Actual size: 2.28 x 2.4 x 0.5in 57,9 x 61,0 x 12,7mm Universal AC Input Front End Module Absolute Maximum Ratings Features & Benefits Parameter Rating Unit Notes RoHS compliant (VE versions) Maximum value of hold-up capacitance 1200 F Universal input: 85 264V AC Thermal resistance 0.4 C/Watt Baseplate-to-sink Output power: 250W Operating temperature 55 to +100 C M-Grade Operating temperature: 100C Storage temperature 65 to 100 C M-Grade Efficiency: 97% Transient surge withstand 1.2/50S, 2kV pulse, 2 joules EN61000-4-5 Integral EMI filtering Common mode 0 to 360 degree phase angle IEC 801-5 Input transient protection 1.2/50S, 1kV pulse, 2 joules Normal mode With external MOV Inrush limiting 0 to 360 degree phase angle CE Marked V I-AIM Input Voltage Compatible Notes Product Highlights DC-DC Converter 85 132 Vac VI-x5x-xx Used with a 100 200V converter IN The AIM (Alternating Input Module) is an AC front-end module which interfaces 180 264 Vac VI-x6x-xx Used with a 200 400V converter IN directly with worldwide AC mains. The AIM 85 264 Vac VI-x7x-xx Used with a 100 375V converter IN provides line rectification, EMI/RFI filtering, transient protection and inrush limiting in a half brick package measuring 2.28 x 2.4 x 0.5. Part Numbering The AIM is used in conjunction with Vicor * VI-200 or VI-J00 DC-DC converters to VI - AIM - E 1 realize a universal AC input, high-density, low-prolfi e switching power supply with Compliance Product Name Product Grade Temperatures (C) AC Input Module VI = Non RoHS outputs from 1 95V and a total Grade Operating Storage DC VE = RoHS power rating up to 200W. An external E = - 10 to +100 - 20 to +100 C = - 25 to +100 - 40 to +100 capacitor is used to satisfy system hold- I = - 40 to +100 - 55 to +100 up requirements. Internal EMI filtering M = - 55 to +100 - 65 to +100 meets EN55022 and FCC Part 15, Class A emissions limits. * For Mega Module packaging option add an L before the product name. Example: Vx-LAIM-xx VI-AIM Rev 2.9 vicorpower.com Page 1 of 4 06/2017 800 927.9474VI-AIM Specifications (typical at T = 25C, nominal line and 75% load, unless otherwise specified) BP INPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes 1 AC line input 85 264 V No strapping no damage below low line AC 47 440 Hz Inrush current <40A at peak line (264V ) RMS 1 Dependent upon input range of compatible DC-DC converter. OUTPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes Output voltage 120 373 V Peak of AC line DC Output power 250 W Delivered to converter(s) Hold-up time Application specific A function of external capacitance and power Efficiency 97% % SAFETY SPECIFICATIONS Parameter Min Typ Max Unit Notes Dielectric withstand Input to output None Provided by DC-DC converter Input/output to baseplate 1,500 V RMS AGENCY APPROVALS Safety Standards Agency Markings Notes VDE 0871/FCC Part 15, Class A With compatible DC-DC converter modules Conducted EMI/RFI EN55022, Class A External 0.47F capacitor required UL1950, CSA 22.2-950, EN60950 GENERAL SPECIFICATIONS Parameter Min Typ Max Unit Notes Size 2.28 x 2.4 x 0.5 (57,9 x 61,0 x 12,7) in (mm) Mega Module, SlimMod and FinMod packages available Weight 3.0 (85) Ounces (Grams) Storage Vicor products, when not installed in customer units, should be stored in ESD safe packaging in accordance with ANSI/ESD S20.20, Protection of Electrical and Electronic Parts, Assemblies and Equipment and should be maintained in a temperature controlled factory/ warehouse environment not exposed to outside elements controlled between the temperature ranges of 15C and 38C. Humidity shall not be condensing, no minimum humidity when stored in an ESD compliant package. VI-AIM Rev 2.9 vicorpower.com Page 2 of 4 06/2017 800 927.9474