S t a y C o n n e c t e d w i t h H e y c o L i q u i d T i g h t C o r d g r i p s HEYbrid Brass/Nylon Liquid Tight Cordgrips Straight-Thru, PG Hubs The Ultimate in Liquid Tight Strain Relief Protection Provide the durability of a nickel-plated CABLE DIA. RANGE PART THREAD PART DIMENSIONS brass enclosure with drastically lower NO. SIZE AB C D Minimum Maximum Clearance Max. O.A. Thread Wrenching Nut installed cost and more secure wire Hole Dia. Length Length Flat Size gripping with nylon finger design. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. HEYBrid Cordgrips make it possible to .04 1,0 .20 5,0 4450 PG 7 .50 12,7 .87 22,0 .20 5,0 .59 15,0 insert different diameters of cable in the .12 3,0 .28 7,0 4451 same cable gland easily, flexibly and .08 2,0 .24 6,0 4452 PG 9 .61 15,5 1.02 26,0 .24 6,0 .71 18,0 .18 4,5 .39 10,0 4453 with a good seal. .14 3,5 .31 8,0 4454 Movable articulated fingers provide PG 11 .75 19,0 1.22 31,0 .24 6,0 .87 22,0 .28 7,0 .51 13,0 4455 large clamping and sealing areas for .14 3,5 .31 8,0 4456 secure and flexible everyday use. PG 13.5 .83 21,1 1.24 31,5 .26 6,5 .87 22,0 .28 7,0 .51 13,0 4457 When tightening the compression nut .14 3,5 .31 8,0 4458 PG 16 .91 23,1 1.24 31,5 .26 6,5 .94 24,0 of the cordgrip, the segmented finger .28 7,0 .51 13,0 4459 design compresses around the gland .20 5,0 .43 11,0 4460 PG 16 .91 23,1 1.48 37,5 .26 6,5 1.10 28,0 .39 10,0 .67 17,0 4461 and wire to provide a torsion proof seal. .28 7,0 .59 15,0 4462 Nickel-plated brass construction for PG 21 1.14 29,0 1.57 40,0 .28 7,0 1.42 36,0 .51 13,0 .83 21,0 4463 superior protection of flexible cables. .59 15,0 .91 23,0 4464 PG 29 1.48 37,6 1.89 48,0 .31 8,0 1.81 46,0 Nickel-plated finish over brass .75 19,0 1.10 28,0 4465 provides excellent corrosion For certifications consult Heyco. resistance and durability. IP 68 rated. For use in clearance or threaded holes. Multiple sizes for flexible cord diameters ranging from .04 (1,0 mm) to 1.10 (28,0 mm). We recommend using the smallest cordgrip that accommodates your cable size. COMPRESSION SEALING FINGER BODY O-RING Sealing gland is molded in NUT RING INSERT INSERT Thermoplastic Polymer Elastomer (TPE) material. Locknuts not included. For metal locknut specifications or to order B A locknuts separately, see page 3-42. DFARS Compliant D C CLEARANCE HOLE Material Nickel-plated Brass w/polyamide PA 6 finger insert, TPE Sealing Gland and Buna-N O-ring Quick Temperature Range -40F (-40C) to 212F (100C) IP Rating IP 68, IP 69K Specs 3-35 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.com