01C1002FF Vishay

T, M, C www.vishay.com Vishay Dale NTC Thermistors, Radial Leaded and Coated FEATURES Small size - conformally coated Wide resistance range Available in 4 different R-T curves Available in point matched tolerances down to 1 % and curve tracking precision down to LINKS TO ADDITIONAL RESOURCES 0.2 C Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Design Tools QUICK REFERENCE DATA APPLICATIONS PARAMETER VALUE UNIT Temperature measurement, sensing and control in Resistance value at 25 C 30 to 220K industrial, consumer and telecom applications. For Tolerance on R -value 25 on-board sensing or for accurate remote sensing in metal 1, 2, 3, 5, 10 % (point matched) probes or housings. Temperature accuracy 0.2, 0.5, 1 C (curve tracking) DESCRIPTION B -value 3477 to 3964 K 25/75 Models T, M, and C are conformally coated, leaded B -value 3468 to 3974 K 25/85 thermistors. The coating is baked-on phenolic for durability Maximum dissipation 50 to 100 mW and long-term stability. Models M and C have tinned solid Dissipation factor 2 to 3.5 mW/K (for information only) copper leads. Model T has solid nickel wires with Teflon Thermal time constant insulation. 6 to 14 s (for information only) Response time (oil) DESIGN-IN SUPPORT 1.3 s (for information only) For complete Curve Computation, visit: Operating temperature range -40 to +125 (150) C www.vishay.com/thermistors/ntc-rt-calculator/ at zero power (short term) Weight 0.075 to 0.15 g T, M, C PRODUCT DATA AND R RESISTANCE RANGE AVAILABILITY 25 B B TCR T M C R TOL. 25/75 25/85 25 25 CURVE (K) (K) (%/K) (k) (k) (k) AVAILABILITY 2 3477 3486 -3.84 0.03 to 3.3 1, 2, 3, 5, 10 9 3679 3694 -4.03 10 to 56 1, 2, 3, 5, 10 8 3925 3943 -4.30 20 to 220 1, 2, 3, 5, 10 1 3964 3974 -4.39 0.2 to 18 1, 2, 3, 5, 10 Maximum dissipation at 25 C in mW 50 75 100 (1) Dissipation factor in mW/K 2.0 2.5 3.0 (1) Response time in s 1.3 1.2 1.4 (1) Thermal time constant in s 14 10 6 Note (1) For information only, dissipation factor, response time, and thermal time constant are wire type and product size dependent STANDARD RESISTANCE VALUES at 25 C in 33 82 270 680 2.2K 5.6K 18K 50K 150K 39 100 330 820 2.7K 6.8K 22K 56K 220K 47 120 390 1K 3.3K 8.2K 27K 68K 50 150 470 1.2K 3.9K 10K 33K 82K 56 180 500 1.5K 4.7K 12K 39K 100K 68 220 560 1.8K 5.0K 15K 47K 120K Note Most popular and available values, intermediate resistance values and tolerances available on request Revision: 08-Apr-2021 Document Number: 33003 1 For technical questions, contact: thermistor1 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T, M, C www.vishay.com Vishay Dale GLOBAL PART NUMBER AND ORDERING INFORMATION Global Part Numbering: 01C2001FP for POINT MATCHED THERMISTORS 0 1C 20 01 F P POINT MATCH CURVE NR GLOBAL MODEL RESISTANCE VAL PACKAGING TOLERANCE T 2001 = 2K F = 1 % F = lead (Pb)-free, bulk 01 M 1503 = 150K P = tin / lead, bulk G = 2 % 02 C 08 H = 3 % 09 J = 5 % K = 10 % Global Part Numbering: 01C2001SPC3 for CURVE TRACKING THERMISTORS 0 1C 20 01 S P C 3 RESISTANCE CURVE TRACK CURVE GLOBAL MODEL CHARACTERISTICS PACKAGING (1) VALUE TOLERANCE 01 T 2001 = 2K SF = lead (Pb)-free, A3 A4 A5 A8 08 M bulk B3 B4 B5 B8 09 C P = tin / lead, bulk C3 C5 C8 Note (1) See following pages for tolerance explanations and details DIMENSIONS in inches (millimeters) TYPE M, C TYPE T 0.25 0.05 (6.35 1.25) TINNED COPPER WIRE TEFLON INSULATED NICKEL WIRE D D 1.5 (36.1) MIN. 3 0.25 (76.2 6.4) CLEAN LEAD LENGTH (1) PRODUCT TYPE WIRE GAUGE/DIAMETER Type M AWG 30: 0.0100 (0.254) Type C AWG 28: 0.0126 (0.320) Type T Insulated AWG 30: 0.0100 (0.254) Note (1) Additional wire gauges (non-insulated) available as AWG24 (type E), AWG26 (type B) and AWG32 (type F). Please contact Vishay (thermistor1 vishay.com) for further details DIAMETER DIAMETER STANDARD R MIN. 25 INCH (mm) INCH (mm) CURVE NUMBER R RANGE 25 R MIN. R MAX. R MIN. 25 25 25 2 30 0.342 (8.69) 330 to 3K 0.095 (2.41) 0.136 (3.45) 9 10K to 56K 0.095 (2.41 0.150 (3.81) 8 20K 0.131 (3.33) 27K to 220K 0.095 (2.41) 0.125 (3.18) 1 200 0.315 (8.00) 1.8K to 18K 0.095 (2.41) 0.136 (3.45) Note Maximum body diameter is dependent on selected curve number and value, the lower resistance values have the largest diameter. For a specific part number within the given resistance ranges, please contact thermistor1 vishay.com for maximum diameter information Revision: 08-Apr-2021 Document Number: 33003 2 For technical questions, contact: thermistor1 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000