Model 132 www.vishay.com Vishay Spectrol 5 1 / (33.3 mm) Low Cost Industrial Single Turn 16 Wirewound, Bushing Mount Type Potentiometer FEATURES Suitable model for all industrial applications Center tap available Continuous rotation and mechanical stops both standard Large electrical angle: 352 2 QUICK REFERENCE DATA Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Sensor type ROTATIONAL, single turn wirewound Output type Output by turrets Market appliance Industrial 5 Dimensions 1 / (33.3 mm) 16 ELECTRICAL SPECIFICATIONS PARAMETER MIL-PRF-12934 TEST PROCEDURES APPLY STANDARD SPECIAL Total Resistance 5 to 20 k to 35 k Tolerance: 50 and Above 3 % 1 % Below 50 5 % 3 % Linearity (independent) STANDARD BEST PRACTICAL Total Resistance 5 to 20 1.0 % 0.75 % 20 to 200 1.0 % 0.50 % 200 and above 0.5 % 0.25 % Noise 100 ENR Power Rating 40 C ambient 2.75 W derated to zero at 125 C Electrical Angle Continuous Rotation 352 2 Stops 340 5 Insulation Resistance 1000 M minimum at 500 V DC Dielectric Strength 1000 V , 60 Hz RMS Absolute Minimum Resistance 1.0 % of total resistance or 0.5 W whichever is greater Minimum Voltage 0.5 % maximum Temperature Coefficient of Resistance Refer to standard resistance element data MATERIAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Housing Molded glass filled thermoplastic Vibration 15 g thru 2000 Hz Rear Lid Glass filled thermoset plastic Shock 50 g Shaft Stainless steel, non-magnetic Salt Spray 48 h Brass, plated for solderability, Rotational Life Terminals Non-passivated Shaft Revolutions 500 000 Mount Hardware Operating Temperature Range - 55 C to + 125 C Lockwasher Internal Tooth: Steel, nickel plated Panel Nut: Brass, nickel plated ORDERING INFORMATION/DESCRIPTION 132 B 0 0 20K BO10 BUSHING MECHANICAL OTHER OPTIONAL MODEL OHMIC VALUE PACKAGING MOUNT OPTIONS FEATURES 0. Standard (end taps) 0. Continuous 1. Center tap (within Box of 10 pieces 2. Stops 5 of electrical center) Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order. Revision: 12-Apr-13 Document Number: 57096 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 132 www.vishay.com Vishay Spectrol SAP PART NUMBERING GUIDELINES 132 B 2 1 103 B10 MODEL STYLE MECHANICAL ELECTRICAL OHMIC VALUE PACKAGING OPTIONS OPTIONS 2: With stops 1: With center tap 103: 10K Box of 10 pieces DIMENSIONS in inches (millimeters) 0.031 0.875 MODEL 132B/132-... + 0.0000 0.015 (22.22) 0.4062 - 0.0020 0.625 (15.88) 0.015 MTG. (10.32) 0.015 60 0.375 0.187 0.010 0.032 (9.52) (4.75) 0.015 (0.81) 0.500 0.062 (12.70) + 0.0000 (1.57) 0.2497 (6.34) - 0.0003 BC 0.030 MAX. (0.76) 0.562 (14.27) 0.015 1.312 (33.32) 0.032 (0.81) 3 / - 32 UNEF - 2A 8 0.125 (3.18) 2 CW 0.062 (1.57) 1 3 MTG. SURFACE TOLERANCES: UNLESS OTHERWISE NOTED. SCHEMATIC DECIMALS 0.005 ANGLES 2 MECHANICAL SPECIFICATIONS PARAMETER Rotation 360 (continuous) or 340 5 (stops) Bearing Type Sleeve STARTING RUNNING Torque (maximums) 1.0 oz. - in (72 g - cm) 0.7 oz.- in (50.40 g - cm) Runouts (maximums) Shaft Runout (TIR) 0.002 (0.05 mm) Pilot Dia. Runout (TIR) 0.003 (0.08 mm) Lateral Runout (TIR) 0.005 (0.13 mm) Shaft End Play 0.008 (0.20 mm) Shaft Radial Play 0.003 (0.08 mm) Weight 1.0 oz. maximum (28.35 g) Stop Strength 8.0 in - lbs (9.21 kg - cm) (stops version only) POWER RATING CHART RESISTANCE ELEMENT DATA 6.0 MAXIMUM MAXIMUM WIRE 5.0 RESISTANCE RESO- OHMS CURRENT VOLTAGE TEMP. VALUES LUTION PER AT 40 C ACROSS COEF. () (%) TURN AMBIENT COIL 4.0 (ppm/C) (mA) (V) 5 0.419 0.021 742 3.71 800 3.0 10 0.327 0.032 524 5.24 800 2.0 20 0.280 0.056 371 7.42 800 50 0.290 0.145 234 11.7 20 1.0 100 0.251 0.251 166 16.6 20 200 0.212 0.424 122 24.4 20 0 20 40 60 80 100 120 140 500 0.161 0.806 74.2 37.1 20 AMBIENT TEMPERATURE IN C 1K 0.150 1.50 52.4 52.4 20 2K 0.132 2.64 37.1 74.2 20 MARKING 5K 0.107 5.34 23.4 117 20 Units shall be marked with Vishay Spectrol 10K 0.080 7.98 16.6 166 20 name, model number, resistance and 20K 0.067 13.4 12.2 244 20 tolerance, linearity, terminal identification, and Unit 35K 0.057 20.0 8.88 311 20 data code Applicable test procedures: Identification MIL-R-12934. Example of a marking for a standard part: 132-0-0-103 Revision: 12-Apr-13 Document Number: 57096 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN W