135D www.vishay.com Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for -55 C to +200 C Operation FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Standard and extended ratings Available Model 135D tantalum-case electrolytic capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These Available units have a 3 V reverse voltage capability at +85 C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. PERFORMANCE CHARACTERISTICS Designed for the aerospace applications, this capacitor Operating Temperature: -55 C to +85 C was developed under partial sponsorship of the Marshal l (to +200 C with voltage derating) Space Flight Center, National Aeronautics and Spac e Capacitance Tolerance: at 120 Hz, +25 C Administration. The capacitors have a high resistance to 20 % standard. 10 %, 5 % available as special. damage from shock and vibration. Extended range ratings DC Leakage Current (DCL Max.): at +25 C and above: and high temperature designs are available. leakage current shall not exceed the values listed in th e Model 135D capacitors are commercial equivalents of Standard Ratings table. Tansitor style AQ, AR, HAQ, HAR, Mallory-NACC Style Life Test: capacitors are capable of withstanding a 2000 h TLT, TXT, THT, THX and Military Style CLR79 and CLR81, life test at a temperature of +85 C or +125 C at the designed to meet the performance requirements of applicable rated DC working voltage. Military Specification MIL-PRF-39006/22/25. Capacitors to meet MIL-PRF-39006/22/25 should be ordered by part Following life test: numbers shown in that specification. 1. DCL, measured at +85 C rated voltage, shall not be in Material categorization: for definitions of compliance excess of the original requirement. please see www.vishay.com/doc 99912 2. The equivalent series resistance shall not exceed 150 % Note of the initial requirement. * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For 3. Change in capacitance shall not exceed 10 % from the example, parts with lead (Pb) terminations are not RoHS-compliant. initial measurement. Please see the information / tables in this datasheet for details ORDERING INFORMATION 135D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS- TOLERANCE AT +85 C CODE COMPLIANT This is expressed X0 = 20 % This is expressed in See Standard temperature E3 = 100 % tin in picofarads. The X9 = 10 % volts. To complete the Ratings (max. +125 C) termination first two digits are X5 = 5 % three-digit block, and 0 = no insulating sleeve (RoHS-compliant the significant zeros precede the Case 2 = polyester insulation sleeve design) figures. The third voltage rating. Codes 3 = high temperature Blank = SnPb is the number of table film insulation termination zeros to follow. (standard design) High temperature (max. +200 C) 6 = high temperature film insulation 8 = no insulating sleeve Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight. Revision: 01-Mar-2019 Document Number: 40024 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000135D www.vishay.com Vishay DIMENSIONS in inches millimeters Tantalum feed-through Style CLR79 0.078 1.98 max. dia. Term. loc. within Style CLR81 0.250 6.35 0.031 0.79 R Terminal max. + of true position - welded to case D dia. Case 0.094 2.38 Circuit diagram External max. 0.025 0.002 Glass weld 0.64 0.05 E L E Insulating sleeve BARE CASE WITH INSULATING SLEEVE WEIGHT E CASE CODE (oz. / g) (1) LEAD LENGTH D L D (MAX.)L (Max.) 0.188 0.016 0.453 + 0.031 / - 0.016 0.219 0.565 1.500 0.250 0.09 C 4.78 0.41 11.51 + 0.79 / - 0.41 5.56 14.35 38.10 6.35 2.6 0.281 0.016 0.641 + 0.031 / -0.016 0.312 0.785 2.250 0.250 0.22 F 7.14 0.41 16.28 + 0.79 / -0.41 7.92 19.94 57.15 6.35 6.2 0.375 0.016 0.766 + 0.031 / - 0.016 0.406 0.95 2.250 0.250 0.41 T 9.53 0.41 19.46 + 0.79 / - 0.41 10.31 24.13 57.15 6.35 11.6 0.375 0.016 1.062 + 0.031 / - 0.016 0.406 1.31 2.250 0.250 0.62 K 9.53 0.41 26.97 + 0.79 / - 0.41 10.31 33.27 57.15 6.35 17.7 Note (1) Typical length, for reference only STANDARD RATINGS MAX. DCL MAX. CAPACITANCE MAX. MAX. ESR MAX. IMP. CHANGE (%) AT (A) AT RIPPLE CAPACITANCE AT +25 C AT -55 C CASE (1) PART NUMBER 40 kHz (F) CODE 120 Hz 120 Hz +85 C I RMS +25 C -55 C +85 C +125 C () ( ) +125 C (mA) 6 V AT +85 C 4 V AT +125 C 3.6 V AT +200 C DC DC DC 30 C 135D306X0006C2 4.0 100 1.0 2.0 -40 +10.5 +12 820 68 C 135D686X0006C2 3.2 60 1.0 2.0 -40 +14 +16 960 140 F 135D147X0006F2 2.0 40 1.0 3.0 -40 +14 +16 1200 270 F 135D277X0006F2 2.2 25 1.0 6.5 -44 +17.5 +20 1375 330 T 135D337X0006T2 1.4 20 2.0 7.9 -44 +14 +16 1800 560 T 135D567X0006T2 1.3 25 2.0 13.0 -64 +17.5 +20 1900 1200 K 135D128X0006K2 1.0 20 3.0 14.0 -80 +25 +25 2265 8 V AT +85 C 5 V AT +125 C 4.8 V AT +200 C DC DC DC 25 C 135D256X0008C2 4.0 100 1.0 2.0 -40 +10.5 +12 820 56 C 135D566X0008C2 3.3 59 1.0 2.0 -40 +14 +16 900 120 F 135D127X0008F2 2.6 50 1.0 2.0 -44 +17.5 +20 1230 220 F 135D227X0008F2 2.4 30 1.0 7.0 -44 +17.5 +20 1370 290 T 135D297X0008T2 1.8 25 2.0 6.0 -64 +17.5 +20 1770 430 T 135D437X0008T2 1.4 25 2.0 14.0 -64 +17.5 +20 1825 850 K 135D857X0008K2 1.0 22 4.0 16.0 -80 +25 +25 2330 10 V AT +85 C 7 V AT +125 C 6 V AT +200 C DC DC DC 20 C 135D206X0010C2 4.0 120 1.0 2.0 -32 +10.5 +12 820 47 C 135D476X0010C2 3.7 90 1.0 2.0 -36 +14 +16 855 100 F 135D107X0010F2 2.4 60 1.0 4.0 -36 +14 +16 1200 180 F 135D187X0010F2 2.2 40 1.0 7.0 -36 +14 +16 1365 250 T 135D257X0010T2 1.8 30 2.0 10.0 -40 +14 +16 1720 390 T 135D397X0010T2 1.5 25 2.0 16.0 -64 +17.5 +20 1800 750 K 135D757X0010K2 1.0 23 4.0 16.0 -80 +25 +25 2360 Note (1) Part numbers are for units with 20 % capacitance tolerance, standard +125 C maximum temperature, standard polyesterfilm insulation, and tin-lead terminations. For other capacitance tolerances, other maximum temperatures, insulation and termination options, please consult Ordering Information on first page for proper part number. Revision: 01-Mar-2019 Document Number: 40024 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000