135D www.vishay.com Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for -55 C to +200 C Operation FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Standard and extended ratings Available Model 135D tantalum-case electrolytic capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These Available units have a 3 V reverse voltage capability at +85 C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. PERFORMANCE CHARACTERISTICS Designed for the aerospace applications, this capacitor Operating Temperature: -55 C to +85 C was developed under partial sponsorship of the Marshall (to +200 C with voltage derating) Space Flight Center, National Aeronautics and Space Capacitance Tolerance: at 120 Hz, +25 C Administration. The capacitors have a high resistance to 20 % standard. 10 %, 5 % available as special. damage from shock and vibration. Extended range ratings DC Leakage Current (DCL Max.): at +25 C and above: and high temperature designs are available. leakage current shall not exceed the values listed in the Model 135D capacitors are commercial equivalents of Standard Ratings table. Tansitor style AQ, AR, HAQ, HAR, Mallory-NACC Style Life Test: capacitors are capable of withstanding a 2000 h TLT, TXT, THT, THX and Military Style CLR79 and CLR81, life test at a temperature of +85 C or +125 C at the designed to meet the performance requirements of applicable rated DC working voltage. Military Specification MIL-PRF-39006/22/25. Capacitors to meet MIL-PRF-39006/22/25 should be ordered by part Following life test: numbers shown in that specification. 1. DCL, measured at +85 C rated voltage, shall not be in Material categorization: for definitions of compliance excess of the original requirement. please see www.vishay.com/doc 99912 2. The equivalent series resistance shall not exceed 150 % Note of the initial requirement. * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For 3. Change in capacitance shall not exceed 10 % from the example, parts with lead (Pb) terminations are not RoHS-compliant. initial measurement. Please see the information / tables in this datasheet for details ORDERING INFORMATION 135D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS- TOLERANCE AT +85 C CODE COMPLIANT This is expressed X0 = 20 % This is expressed in See Standard temperature E3 = 100 % tin in picofarads. The X9 = 10 % volts. To complete the Ratings (max. +125 C) termination first two digits are X5 = 5 % three-digit block, and 0 = no insulating sleeve (RoHS-compliant the significant zeros precede the Case 2 = polyester insulation sleeve design) figures. The third voltage rating. Codes 3 = high temperature Blank = SnPb is the number of table film insulation termination zeros to follow. (standard design) High temperature (max. +200 C) 6 = high temperature film insulation 8 = no insulating sleeve Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight. Revision: 02-Nov-17 Document Number: 40024 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 135D www.vishay.com Vishay DIMENSIONS in inches millimeters E L E 1 D Weld 0.0253 0.002 0.64 0.05 dia. (no. 22 AWG) tinned nickel leads Tantalum L solderable and weldable 2 WEIGHT CASE DCLR 79 / 81 L 2 DL E (g) 1 CODE EQUIV. (max.) (Max.) 0.188 0.016 0.453 + 0.031 / - 0.016 0.734 1.500 0.250 C T1 2.6 4.78 0.41 11.51 + 0.79 / - 0.41 18.64 38.10 6.35 0.281 0.016 0.641 + 0.031 / - 0.016 0.922 2.250 0.250 F T2 6.2 7.14 0.41 16.28 + 0.79 / - 0.41 23.42 57.15 6.35 0.375 0.016 0.766 + 0.031 / - 0.016 1.047 2.250 0.250 T T3 11.6 9.53 0.41 19.46 + 0.79 / - 0.41 26.59 57.15 6.35 0.375 0.016 1.062 + 0.031 / - 0.016 1.343 2.250 0.250 K T4 17.7 9.53 0.41 26.97 + 0.79 / - 0.41 34.11 57.15 6.35 Note For insulated parts, add 0.015 0.38 to the diameter. The insulation shall lap over the ends of the capacitor body. STANDARD RATINGS MAX. DCL MAX. CAPACITANCE MAX. MAX. ESR MAX. IMP. (A) AT CHANGE (%) AT RIPPLE CAPACITANCE CASE AT +25 C AT -55 C (1) PART NUMBER 40 kHz (F) CODE 120 Hz 120 Hz +85 C I RMS +25 C -55 C +85 C +125 C () ( ) +125 C (mA) 6 V AT +85 C 4 V AT +125 C 3.6 V AT +200 C DC DC DC 30 C 135D306X0006C2 4.0 100 1.0 2.0 -40 +10.5 +12 820 68 C 135D686X0006C2 3.2 60 1.0 2.0 -40 +14 +16 960 140 F 135D147X0006F2 2.0 40 1.0 3.0 -40 +14 +16 1200 270 F 135D277X0006F2 2.2 25 1.0 6.5 -44 +17.5 +20 1375 330 T 135D337X0006T2 1.4 20 2.0 7.9 -44 +14 +16 1800 560 T 135D567X0006T2 1.3 25 2.0 13.0 -64 +17.5 +20 1900 1200 K 135D128X0006K2 1.0 20 3.0 14.0 -80 +25 +25 2265 8 V AT +85 C 5 V AT +125 C 4.8 V AT +200 C DC DC DC 25 C 135D256X0008C2 4.0 100 1.0 2.0 -40 +10.5 +12 820 56 C 135D566X0008C2 3.3 59 1.0 2.0 -40 +14 +16 900 120 F 135D127X0008F2 2.6 50 1.0 2.0 -44 +17.5 +20 1230 220 F 135D227X0008F2 2.4 30 1.0 7.0 -44 +17.5 +20 1370 290 T 135D297X0008T2 1.8 25 2.0 6.0 -64 +17.5 +20 1770 430 T 135D437X0008T2 1.4 25 2.0 14.0 -64 +17.5 +20 1825 850 K 135D857X0008K2 1.0 22 4.0 16.0 -80 +25 +25 2330 10 V AT +85 C 7 V AT +125 C 6 V AT +200 C DC DC DC 20 C 135D206X0010C2 4.0 120 1.0 2.0 -32 +10.5 +12 820 47 C 135D476X0010C2 3.7 90 1.0 2.0 -36 +14 +16 855 100 F 135D107X0010F2 2.4 60 1.0 4.0 -36 +14 +16 1200 180 F 135D187X0010F2 2.2 40 1.0 7.0 -36 +14 +16 1365 250 T 135D257X0010T2 1.8 30 2.0 10.0 -40 +14 +16 1720 390 T 135D397X0010T2 1.5 25 2.0 16.0 -64 +17.5 +20 1800 750 K 135D757X0010K2 1.0 23 4.0 16.0 -80 +25 +25 2360 Note (1) Part numbers are for units with 20 % capacitance tolerance, standard +125 C maximum temperature, standard polyesterfilm insulation, and tin-lead terminations. For other capacitance tolerances, other maximum temperatures, insulation and termination options, please consult Ordering Information on first page for proper part number. Revision: 02-Nov-17 Document Number: 40024 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000