138D www.vishay.com Vishay Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEATURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model 138D is the commercial equivalents of Available Tansitor styles WT, UWT, Mallory-NACC styles TLX, TXX and military styles CL66, CL67, CLR65, and CLR69, designed to meet the performance requirements of military Available specification MIL-PRF-39006/9/21. Capacitors in accordance with military specifications should be ordered by their military part numbers Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C Following the life test: (to +125 C with voltage derating) 1. DCL shall not exceed 125 % of the original requirement. Capacitance Tolerance: at 120 Hz, +25 C. 20 % 2.The ESR shall not exceed 200 % of the initial standard. 10 %, 5 % available as special. requirement. DC Leakage Current (DCL Max.): at +25 C, +85 C and 3.Change in capacitance value shall not exceed the +125 C: leakage current shall not exceed the values listed percentages below. in the Standard Ratings tables. a) 6 V units: +10 % to -25 % of initial measurement. DC Life Test: capacitors are capable of withstanding a 2000 h b) 8 V and 10 V units: +10 % to -20 % of initial DC DC life test at a temperature of +85 C or +125 C at the measurement. applicable rated DC working voltage. c) 15 V units: +10 % to -15 % of initial measurement. DC d) 20 V and above: 10 % of initial measurement. DC ORDERING INFORMATION 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS-COMPLIANT TOLERANCE AT +85 C CODE This is expressed X0 = 20 % This is expressed in volts. See 0 = no outer sleeve E3 = 100 % tin in picofarads. The X9 = 10 % To complete the Ratings 2 = outer plastic termination first two digits are X5 = 5 % three-digit block, zeros and Case film insulation (RoHS-compliant) the significant special order precede the voltage Codes 6 = high temperature Blank = SnPb figures. The third is rating. A decimal point is table film insulation termination the number of indicated by an R (standard design) zeros to follow (6R3 = 6.3 V) Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight Revision: 06-Sep-2018 Document Number: 40025 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 138D www.vishay.com Vishay DIMENSIONS in inches millimeters 0.250 6.35 L D Max. 0.0253 0.002 0.64 0.05 dia. Weld Tantalum (no. 22 AWG) tinned solderable leads WITH OUTER PLASTIC - MAX. BARE TUBE CASE FILM INSULATION LEAD LENGTH WEIGHT CODE (1) (oz. / g) DL D (MAX.) L 0.188 0.016 0.453 + 0.031 / - 0.016 0.219 0.608 1.500 0.250 0.07 C 4.78 0.41 11.51 + 0.79 / - 0.41 5.56 15.45 38.10 6.35 2.0 0.281 0.016 0.641 + 0.031 / - 0.016 0.312 0.796 2.250 0.250 0.18 F 7.14 0.41 16.28 + 0.79 / - 0.41 7.92 20.22 57.15 6.35 5.1 0.375 0.016 0.766 + 0.031 / - 0.016 0.406 0.921 2.250 0.250 0.36 T 9.53 0.41 19.46 + 0.79 / - 0.41 10.31 23.40 57.15 6.35 10.2 0.375 0.016 1.062 + 0.031 / - 0.023 0.406 1.127 2.250 0.250 0.49 K 9.53 0.41 26.97 + 0.79 / - 0.58 10.31 30.91 57.15 6.35 13.9 Note (1) For reference only STANDARD RATINGS MAX. DCL (A) MAX. CAPACITANCE MAX. RMS MAX. ESR MAX. IMP. AT CHANGE (%) AT RIPPLE CAPACITANCE CASE AT +25 C AT -55 C (1) PART NUMBER CURRENT (F) CODE 120 Hz 120 Hz +85 C 120 Hz +25 C -55 C +85 C +125 C () () +125 C (mA) 6 V AT +85 C 4 V AT +125 C DC DC 30 C138D306X0006C2 4 100 1 2 -40 +10.5 +12 140 68 C138D686X0006C2 4 60 1 2 -40 +14 +16 160 140 F138D147X0006F2 2 40 1 3 -40 +14 +16 330 270 F138D277X0006F2 4 25 1 6.5 -44 +17.5 +20 330 330 T138D337X0006T2 2 20 2 7.9 -44 +14 +16 410 560 T138D567X0006T2 3 25 2 13 -64 +17.5 +20 410 1200 K 138D128X0006K2 1.6 20 3 14 -80 +25 +25 530 8 V AT +85 C 5 V AT +125 C DC DC 25 C138D256X0008C2 4 100 1 2 -40 +10.5 +12 140 56 C138D566X0008C2 4 59 1 2 -40 +14 +16 160 220 F138D227X0008F2 4 30 1 7 -44 +17.5 +20 270 430 T138D437X0008T2 3 25 2 14 -64 +17.5 +20 410 850 K138D857X0008K2 1 22 4 16 -80 +25 +25 670 10 V AT +85 C 7 V AT +125 C DC DC 20 C138D206X0010C2 4 175 1 2 -32 +10.5 +12 140 47 C138D476X0010C2 5 100 1 2 -36 +14 +16 160 100 F138D107X0010F2 2 60 1 4 -36 +14 +16 270 180 F138D187X0010F2 4 40 1 7 -36 +14 +16 270 250 T138D257X0010T2 2 30 2 10 -40 +14 +16 410 390 T138D397X0010T2 3 25 2 16 -64 +17.5 +20 410 750 K138D757X0010K2 1 23 4 16 -80 +25 +25 670 Note (1) Part numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit following the letter X from 0 to 9 for 5 %, change the digit following the letter X from 0 to 5. For capacitors without outer polyester-film insulation, change the last digit in the part number from 2 to 0. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from 2 to 6. For RoHS-compliant add E3 Revision: 06-Sep-2018 Document Number: 40025 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000