150D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX Capacitors, Hermetically-Sealed, Axial-Lead FEATURES Terminations: tin / lead (SnPb), 100 % tin Available (RoHS-compliant) Available These high performance, hermetically-sealed TANTALEX capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades High capacitance, low DCL, low dissipation factor and exceptional operating stability Performance and reliability have been proven in PERFORMANCE CHARACTERISTICS commercial, industrial and military applications Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Available in four case codes and capacitors and are Capacitance Tolerance: at 120 Hz, +25 C supplied with plastic-film insulation 20 %, 10 % standard. 5 % available as special Terminals are solid, tinned nickel wire leads Dissipation Factor: at 120 Hz, +25 C The military equivalent to the 150D is the M39003/01 DC Leakage Current (DCL Max.): (style CSR13) which is qualified to MIL-PRF-39003 at +25 C: leakage current shall not exceed the values listed in the Standard Ratings table Material categorization: for definitions of compliance at +85 C: leakage current shall not exceed 10 times the please see www.vishay.com/doc 99912 values listed in the Standard Ratings table Note at +125 C: leakage shall not exceed 15 times the values * This datasheet provides information about parts that are listed in the Standard Ratings table RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Life Test: capacitors shall withstand rated DC voltage Please see the information / tables in this datasheet for details. applied at +85 C for 2000 h or derated DC voltage applied at +125 C for 1000 h Following the life test: 1. DCL shall not exceed 125 % of the initial requirement 2. Dissipation factor shall meet the initial requirement 3. Change in capacitance shall not exceed 5 % ORDERING INFORMATION 150D 224 X0 006 A 2 T E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE PACKAGING RoHS- TOLERANCE AT 85 C CODE NUMBER COMPLIANT This is expressed X0 = 20 % This is expressed in See 0 = no sleeve B = bulk E3 = 100 % tin in picofarads. The X9 = 10 % volts. To complete the Ratings 2 = insulated T = tape termination first two digits are X5 = 5 % * three-digit block, and Case sleeve and reel (RoHS-compliant) the significant * Special order zeros precede the Codes Blank = SnPb figures. The third voltage rating. table termination is the number of zeros to follow. Revision: 05-Dec-14 Document Number: 40015 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 150D www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters 1.500 0.250 1.500 0.250 D 38.10 6.35 38.10 6.35 dia. L Positive lead 1 - + 0.047 1.19 max. 0.125 3.18 max. Solid tinned J nickel leads max. D L LEAD SIZE 1 J CASE CODE (1) (MAXIMUM) WITH INSULATING SLEEVE AWG NO. NOMINAL DIAMETER A 0.135 0.016 3.43 0.41 0.286 0.031 7.26 0.79 0.422 10.720 24 0.020 0.51 B 0.185 0.016 4.70 0.41 0.474 0.031 12.04 0.79 0.610 15.490 24 0.020 0.51 R 0.289 0.016 7.34 0.41 0.686 0.031 17.42 0.79 0.822 20.880 22 0.025 0.64 S 0.351 0.016 8.92 0.41 0.786 0.031 19.96 0.79 0.922 23.420 22 0.025 0.64 Note (1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body STANDARD RATINGS MAX. DF MAX. DCL CAPACITANCE AT +25 C CASE CODE PART NUMBER AT +25 C (F) 120 Hz (A) (%) 6 V AT +85 C, SURGE = 8 V 4 V AT +125 C, SURGE = 5 V DC DC 0.22 A 150D224(1)006A2 0.5 2 0.27 A 150D274(1)006A2 0.5 2 0.33 A 150D334(1)006A2 0.5 2 0.39 A 150D394(1)006A2 0.5 2 0.47 A 150D474(1)006A2 0.5 2 0.56 A 150D564(1)006A2 0.5 2 0.68 A 150D684(1)006A2 0.5 2 0.82 A 150D824(1)006A2 0.5 2 1.0 A 150D105(1)006A2 0.5 2 1.2 A 150D125(1)006A2 0.5 4 1.5 A 150D155(1)006A2 0.5 4 1.8 A 150D185(1)006A2 0.5 4 2.2 A 150D225(1)006A2 0.5 4 2.7 A 150D275(1)006A2 0.5 4 3.3 A 150D335(1)006A2 0.5 4 3.9 A 150D395(1)006A2 0.5 4 4.7 A 150D475(1)006A2 0.5 4 5.6 A 150D565(1)006A2 0.5 4 6.8 A 150D685(1)006A2 0.5 6 8.2 B 150D825(1)006B2 0.5 6 10 B 150D106(1)006B2 0.5 6 12 B 150D126(1)006B2 0.5 6 15 B 150D156(1)006B2 1.0 6 18 B 150D186(1)006B2 1.0 6 Note Part number definitions: (1) For 10 % tolerance specify X9 for 20 % specify X0 for 5 % X5 (special order) Revision: 05-Dec-14 Document Number: 40015 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000