150D Vishay Sprague Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead FEATURES Terminations: Tin/lead (SnPb), 100 % Tin (RoHS compliant) Available These high performance, hermetically-sealed RoHS* TANTALEX capacitors have set the standard COMPLIANT for solid-electrolyte tantalum capacitors for more than three decades. High capacitance, low DCL, low dissipation factor and exceptional operating stability. Performance and reliability have been proven in commercial, industrial and military applications. Available in four case codes and capacitors and are supplied with plastic-film insulation. Terminals are solid, tinned nickel wire leads. The Military equivalent to the 150D is the CSR13 which is qualified to MIL-C-39003/01. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C. At + 85 C: Leakage current shall not exceed 10 times the (To + 125 C with voltage derating.) values listed in the Standard Ratings Tables. At +125 C: Leakage shall not exceed 15 times the values Capacitance Tolerance: At 120 Hz, + 25 C. 20 %, listed in the Standard Ratings Tables. 10 % standard. 5 % available as special. Life Test: Capacitors shall withstand rated DC voltage Dissipation Factor: At 120 Hz, + 25 C. Dissipation factor, applied at + 85 C for 2000 hours or derated DC voltage as determined from the expression 2fRC, shall not exceed applied at + 125 C for 1000 hours the values listed in the Standard Ratings Tables. Following the life test: DC Leakage Current (DCL Max.): 1. DCL shall not exceed 125 % of the initial requirement. At + 25 C: Leakage current shall not exceed the values 2. Dissipation Factor shall meet the initial requirement. listed in the Standard Ratings Tables. 3. Change in capacitance shall not exceed 5 %. DIMENSIONS in inches millimeters 1.500 0.250 1.500 0.250 D 38.10 6.35 38.10 6.35 DIA. L 0.047 1.19 MAX. SOLID TINNED 0.125 3.18 MAX. NICKEL LEADS J MAX. WITH INSULATING SLEEVE** LEAD SIZE CASE CODE J (MAXIMUM) AWG NOMINAL D L NO. DIAMETER 0.135 0.016 0.286 0.031 0.422 0.020 A 24 3.43 0.41 7.26 0.79 10.720 0.51 0.185 0.016 0.474 0.031 0.610 0.020 B 24 4.70 0.41 12.04 0.79 15.490 0.51 0.289 0.016 0.686 0.031 0.822 0.025 R 22 7.34 0.41 17.42 0.79 20.880 0.64 0.351 0.016 0.786 0.031 0.922 0.025 S 22 8.92 0.41 19.96 0.79 23.420 0.64 Notes * Pb containing terminations are not Rohs compliant, exemptions may apply ** When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body www.vishay.com For technical questions, contact: tantalum vishay.com Document Number: 40015 1 Revision: 11-May-07150D Solid-Electrolyte TANTALEX Capacitors Vishay Sprague Hermetically-Sealed, Axial-Lead ORDERING INFORMATION 150D 224 X0 006 A 2 T E3 MODEL CAPACITANCE CAPACITANCE DC CASE STYLE PACKAGING ROHS TOLERANCE VOLTAGE RATING CODE NUMBER COMPLIANT This is expressed X0 = 20 % This is expressed in volts. See 0 = No Sleeve B = Bulk E3 = 100 % Tin in picofarads. The X9 = 10 % To complete the Ratings 2 = Insulated T = Tape and termination first two digits are *X5 = 5 % three-digit block, zeros and Case sleeve. Reel (RoHS compliant) the significant *Special Order. precede the voltage Codes Blank = SnPb figures. The third rating. Table. termination is the number of zeros to follow. STANDARD RATINGS Max. DCL Max. DF PART NUMBER PART NUMBER CAPACITANCE (F) CASE CODE at + 25 C at + 25 C CAP. TOL. 20 % CAP. TOL. 10 % (A) 120 Hz (%) 6 WVDC AT + 85 C, SURGE = 8 V . 4 WVDC AT + 125 C, SURGE = 5 V 0.22 A 150D224X0006A2 150D224X9006A2 0.5 2 0.27 A - 150D274X9006A2 0.5 2 0.33 A 150D334X0006A2 150D334X9006A2 0.5 2 0.39 A - 150D394X9006A2 0.5 2 0.47 A 150D474X0006A2 150D474X9006A2 0.5 2 0.56 A - 150D564X9006A2 0.5 2 0.68 A 150D684X0006A2 150D684X9006A2 0.5 2 0.82 A - 150D824X9006A2 0.5 2 1.0 A 150D105X0006A2 150D105X9006A2 0.5 2 1.2 A - 150D125X9006A2 0.5 4 1.5 A 150D155X0006A2 150D155X9006A2 0.5 4 1.8 A - 150D185X9006A2 0.5 4 2.2 A 150D225X0006A2 150D225X9006A2 0.5 4 2.7 A - 150D275X9006A2 0.5 4 3.3 A 150D335X0006A2 150D335X9006A2 0.5 4 3.9 A - 150D395X9006A2 0.5 4 4.7 A 150D475X0006A2 150D475X9006A2 0.5 4 5.6 A - 150D565X9006A2 0.5 4 6.8 A 150D685X0006A2 150D685X9006A2 0.5 6 8.2 B - 150D825X9006B2 0.5 6 10.0 B 150D106X0006B2 150D106X9006B2 0.5 6 12.0 B - 150D126X9006B2 0.5 6 15.0 B 150D156X0006B2 150D156X9006B2 1.0 6 18.0 B - 150D186X9006B2 1.0 6 22.0 B 150D226X0006B2 150D226X9006B2 1.0 6 27.0 B - 150D276X9006B2 1.0 6 33.0 B 150D336X0006B2 150D336X9006B2 1.0 6 39.0 B - 150D396X9006B2 1.0 6 47.0 B 150D476X0006B2 150D476X9006B2 2.0 6 56.0 B - 150D566X9006B2 2.0 6 68.0 R 150D686X0006R2 150D686X9006R2 3.0 6 82.0 R - 150D826X9006R2 3.0 6 100.0 R 150D107X0006R2 150D107X9006R2 3.0 6 120.0 R 150D127X0006R2 150D127X9006R2 3.0 6 150.0 R 150D157X0006R2 150D157X9006R2 6.0 6 180.0 R 150D187X0006R2 150D187X9006R2 6.0 6 220.0 S 150D227X0006S2 150D227X9006S2 6.0 8 270.0 S 150D277X0006S2 150D277X9006S2 6.0 8 330.0 S 150D337X0006S2 150D337X9006S2 10.0 8 Document Number: 40015 For technical questions, contact: tantalum vishay.com www.vishay.com Revision: 11-May-07 2