150D
www.vishay.com
Vishay Sprague
Solid-Electrolyte TANTALEX Capacitors,
Hermetically-Sealed, Axial-Lead
FEATURES
Terminations: tin / lead (SnPb),
Available
100 % tin (RoHS-compliant)
Available
These high performance, hermetically-sealed
TANTALEX capacitors have set the standard for
solid-electrolyte tantalum capacitors for more
than three decades
High capacitance, low DCL, low dissipation factor and
exceptional operating stability
Performance and reliability have been proven in
PERFORMANCE CHARACTERISTICS
commercial, industrial and military applications
Operating Temperature: -55 C to +125 C
(above 85 C, voltage derating is required)
Available in four case codes and capacitors and are
Capacitance Tolerance: at 120 Hz, +25 C supplied with plastic-film insulation
20 %, 10 % standard. 5 % available as special
Terminals are solid, tinned nickel wire leads
Dissipation Factor: at 120 Hz, +25 C
The military equivalent of the 150D is the M39003/01 (style
DC Leakage Current (DCL Max.):
CSR13) which is qualified to MIL-PRF-39003/1
at +25 C: leakage current shall not exceed the values listed
Material categorization: for definitions of compliance
in the Standard Ratings table
please see www.vishay.com/doc?99912
at +85 C: leakage current shall not exceed 10 times the
Note
values listed in the Standard Ratings table
* This datasheet provides information about parts that are
at +125 C: leakage shall not exceed 15 times the values
RoHS-compliant and / or parts that are non-RoHS-compliant. For
listed in the Standard Ratings table
example, parts with lead (Pb) terminations are not RoHS-compliant.
Life Test: capacitors shall withstand rated DC voltage
Please see the information / tables in this datasheet for details.
applied at +85 C for 2000 h or derated DC voltage applied
at +125 C for 1000 h
Following the life test:
1. DCL shall not exceed 125 % of the initial requirement
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed 5 %
ORDERING INFORMATION
150D 224 X0 006 A 2 T E3
MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE PACKAGING RoHS-
TOLERANCE AT 85 C CODE NUMBER COMPLIANT
This is expressed X0 = 20 % This is expressed in See 0 = no sleeve B = bulk E3 = 100 % tin
in picofarads. The X9 = 10 % volts. To complete the Ratings 2 = insulated T = tape termination
first two digits are X5 = 5 % * three-digit block, and Case sleeve and reel (RoHS-compliant)
the significant * Special order zeros precede the Codes G = ammo Blank = SnPb
figures. The third voltage rating. table pack termination
is the number of
zeros to follow.
Revision: 24-Nov-16 Document Number: 40015
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
1.500 0.250 1.500 0.250
D
[38.10 6.35] [38.10 6.35]
dia.
L Positive lead
1
- +
0.047 [1.19] max.
0.125 [3.18] max.
Solid tinned
J
nickel leads
max.
D L LEAD SIZE
1 J
CASE CODE
(1) (MAXIMUM)
WITH INSULATING SLEEVE AWG NO. NOMINAL DIAMETER
A 0.135 0.016 [3.43 0.41] 0.286 0.031 [7.26 0.79] 0.422 [10.720] 24 0.020 [0.51]
B 0.185 0.016 [4.70 0.41] 0.474 0.031 [12.04 0.79] 0.610 [15.490] 24 0.020 [0.51]
R 0.289 0.016 [7.34 0.41] 0.686 0.031 [17.42 0.79] 0.822 [20.880] 22 0.025 [0.64]
S 0.351 0.016 [8.92 0.41] 0.786 0.031 [19.96 0.79] 0.922 [23.420] 22 0.025 [0.64]
Note
(1)
When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body
STANDARD RATINGS
MAX. DF
MAX. DCL
CAPACITANCE AT +25 C
CASE CODE PART NUMBER AT +25 C
(F) 120 Hz
(A)
(%)
6 V AT +85 C, SURGE = 8 V; 4 V AT +125 C, SURGE = 5 V
DC DC
0.22 A 150D224(1)006A(2)(3)(4) 0.5 2
0.27 A 150D274(1)006A(2)(3)(4) 0.5 2
0.33 A 150D334(1)006A(2)(3)(4) 0.5 2
0.39 A 150D394(1)006A(2)(3)(4) 0.5 2
0.47 A 150D474(1)006A(2)(3)(4) 0.5 2
0.56 A 150D564(1)006A(2)(3)(4) 0.5 2
0.68 A 150D684(1)006A(2)(3)(4) 0.5 2
0.82 A 150D824(1)006A(2)(3)(4) 0.5 2
1.0 A 150D105(1)006A(2)(3)(4) 0.5 2
1.2 A 150D125(1)006A(2)(3)(4) 0.5 4
1.5 A 150D155(1)006A(2)(3)(4) 0.5 4
1.8 A 150D185(1)006A(2)(3)(4) 0.5 4
2.2 A 150D225(1)006A(2)(3)(4) 0.5 4
2.7 A 150D275(1)006A(2)(3)(4) 0.5 4
3.3 A 150D335(1)006A(2)(3)(4) 0.5 4
3.9 A 150D395(1)006A(2)(3)(4) 0.5 4
4.7 A 150D475(1)006A(2)(3)(4) 0.5 4
5.6 A 150D565(1)006A(2)(3)(4) 0.5 4
6.8 A 150D685(1)006A(2)(3)(4) 0.5 6
8.2 B 150D825(1)006B(2)(3)(4) 0.5 6
10 B 150D106(1)006B(2)(3)(4) 0.5 6
12 B 150D126(1)006B(2)(3)(4) 0.5 6
15 B 150D156(1)006B(2)(3)(4) 1.0 6
18 B 150D186(1)006B(2)(3)(4) 1.0 6
Note
Part number definitions:
(1) For 10 % tolerance specify X9; for 20 % specify X0; for 5 % X5 (special order)
(2) Style number: 0 = no sleeve, 2 = insulated sleeve
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack
(4) Termination: E3 = 100 % tin, blank = SnPb
Revision: 24-Nov-16 Document Number: 40015
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000