152D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX Capacitors, Extended Capacitance Values, Hermetically-Sealed FEATURES Axial through-hole terminations: Available tin / lead (SnPb), 100 % tin (RoHS-compliant) High capacitance and small size Available Exceptional operating stability Hermetically-sealed, cylindrical, metal-case Low leakage current and low dissipation factor The military equivalent of the 152D is the M39003/03 (style CSR23) which is qualified to MIL-PRF-39003/3 Provide proven reliability in a wide variety of high performance military, industrial and commercial markets Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C At +125 C: leakage shall not exceed 12 times the values (to +125 C with voltage derating) listed in the Standard Ratings table Capacitance Tolerance: at 120 Hz, +25 C Life Test: capacitors shall withstand rated DC voltage 20 % and 10 % standard. 5 % available as special applied at +85 C for 2000 h or derated DC voltage applied at +125 C for 1000 h Dissipation Factor: at 120 Hz, +25 C Dissipation factor, as determined from the expression Following the life test: 2fRC, shall not exceed the values listed in the Standard 1. DCL shall not exceed 125 % of the initial requirement. In Ratings table no case need the leakage current be less than 2 A DC Leakage Current (DCL Max.): 2. Dissipation factor shall meet the initial requirement at +25 C: leakage current shall not exceed the values listed 3. Change in capacitance shall not exceed 5 % in the Standard Ratings table at +85 C: leakage current shall not exceed 10 times the values listed in the Standard Ratings table ORDERING INFORMATION 152D 106 X0 006 A 2 T E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE PACKAGING RoHS- TOLERANCE AT +85 C CODE NUMBER COMPLIANT This is expressed X0 = 20 % This is expressed in See 2 = insulated B = bulk E3 = 100 % tin in picofarads. The X9 = 10 % volts. To complete the Ratings sleeve T = tape termination first two digits are X5 = 5 % * three-digit block, and Case and reel (RoHS-compliant) the significant * Special order zeros precede the Codes G = ammo Blank = SnPb figures. The third voltage rating. table pack termination is the number of zeros to follow. Revision: 16-Nov-17 Document Number: 40016 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 152D www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters 1.500 0.250 1.500 0.250 D 38.10 6.35 38.10 6.35 dia. L Positive lead - + Solid tinned 0.047 1.19 max. nickel leads 0.125 3.18 max. J max. DL LEAD SIZE J CASE CODE (1) (MAXIMUM) WITH INSULATING SLEEVE AWG NO. NOMINAL DIAMETER A 0.135 0.016 3.43 0.41 0.286 0.031 7.26 0.79 0.422 10.72 24 0.020 0.51 B 0.185 0.016 4.70 0.41 0.474 0.031 12.04 0.79 0.610 15.49 24 0.020 0.51 R 0.289 0.016 7.34 0.41 0.686 0.031 17.42 0.79 0.822 20.88 22 0.025 0.64 S 0.351 0.016 8.92 0.41 0.786 0.031 19.96 0.79 0.922 23.42 22 0.025 0.64 Note (1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body STANDARD RATINGS MAX. DF MAX. DCL CAPACITANCE AT +25 C CASE CODE PART NUMBER AT +25 C (F) 120 Hz (A) (%) 6 V AT +85 C, SURGE = 8 V 4 V AT +125 C, SURGE = 5 V DC DC 10 A 152D106(1)006A2(2)(3) 1.0 6 12 A 152D126(1)006A2(2)(3) 1.0 6 15 A 152D156(1)006A2(2)(3) 1.0 6 68 B 152D686(1)006B2(2)(3) 3.0 6 82 B 152D826(1)006B2(2)(3) 3.0 6 100 B 152D107(1)006B2(2)(3) 6.0 6 330 R 152D337(1)006R2(2)(3) 10.0 8 390 R 152D397(1)006R2(2)(3) 10.0 8 470 R 152D477(1)006R2(2)(3) 10.0 8 560 S 152D567(1)006S2(2)(3) 20.0 10 680 S 152D687(1)006S2(2)(3) 20.0 10 820 S 152D827(1)006S2(2)(3) 20.0 10 1000 S 152D108(1)006S2(2)(3) 20.0 10 10 V AT +85 C, SURGE = 13 V 7 V AT +125 C, SURGE = 9 V DC DC 5.6 A 152D565(1)010A2(2)(3) 1.0 4 6.8 A 152D685(1)010A2(2)(3) 1.0 6 8.2 A 152D825(1)010A2(2)(3) 1.2 6 10 A 152D106(1)010A2(2)(3) 1.2 6 47 B 152D476(1)010B2(2)(3) 4.0 6 56 B 152D566(1)010B2(2)(3) 5.0 6 Note Part number definitions: (1) For 10 % tolerance specify X9 for 20 % specify X0 for 5 % X5 (special order) (2) Packaging options: B = bulk, T = tape and reel, G = ammo pack (3) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40016 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000