1.5KE82CA-E3/54 Vishay

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor TRANSZORB Transient Voltage Suppressors FEATURES Glass passivated chip junction Available in unidirectional and bidirectional 1500 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle) : 0.01 % Excellent clamping capability Very fast response time Low incremental surge resistance Case Style 1.5KE AEC-Q101 qualified available Solder dip 275 C max. 10 s, per JESD 22-B106 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage V unidirectional 6.8 V to 540 V BR transients induced by inductive load switching and lightin g V bidirectional 6.8 V to 220 V BR on ICs, MOSFET, signal lines of sensor units for consumer, V unidirectional 5.8 V to 459 V WM computer, industrial, automotive, and telecommunication. V bidirectional 5.8 V to 185 V WM P 1500 W MECHANICAL DATA PPM P 6.5 W D Case: molded epoxy body over passivated junction I (unidirectional only) 200 A FSM Molding compound meets UL 94 V-0 flammability rating T max. 175 C Base P/N-E3 - RoHS compliant, commercial grade J Base P/NHE3 X - RoHS compliant, and AEC-Q101 qualifie d Polarity Unidirectional, bidirectional (X denotes revision code e.g. A, B, ...) Package 1.5KE Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 DEVICES FOR BIDIRECTION APPLICATIONS E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix For bidirectional types, use CA suffix (e.g. 1.5KE220CA) meets JESD 201 class 2 whisker test Electrical characteristics apply in both directions. Note 1.5KE250A to 1.5KE540A are commercial grade only Bidirectional is available from 1.5KE6.8CA to 1.5KE220CA only Polarity: for unidirectional types the color band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Peak pulse power dissipation with a 10/1000 s waveform (fig. 1) P 1500 W PPM (1) Peak pulse current with a 10/1000 s waveform I See next table A PPM Power dissipation on infinite heatsink at T = 75 C (fig. 5) P 6.5 W L D (2) Peak forward surge current 8.3 ms single half sine-wave unidirectional only I 200 A FSM (3) Maximum instantaneous forward voltage at 100 A for unidirectional only V 3.5/5.0 V F Operating junction and storage temperature range T , T -55 to +175 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) V = 3.5 V for 1.5KE220A and below V = 5.0 V for 1.5KE250A and above F F Revision: 21-Sep-2020 Document Number: 88301 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK JEDEC GENERAL CLAMPING TEMPERATURE (1) V AT I CURRENT VOLTAGE LEAKAGE PULSE BR T TYPE SEMICONDUCTOR VOLTAGE COEFFICIENT (V) I V AT V CURRENT T WM WM NUMBER PART NUMBER AT I OF V PPM BR (4) (2) (mA) (V) I I D PPM V (V) (%/C) C MIN. MAX. (A) (A) (+) 1N6267A 1.5KE6.8A 6.457.14 10 5.80 1000 143 10.5 0.057 (+) 1N6268A 1.5KE7.5A 7.137.88 10 6.40 500 133 11.3 0.061 (+) 1N6269A 1.5KE8.2A 7.798.61 10 7.02 200 124 12.1 0.065 (+) 1N6270A 1.5KE9.1A 8.659.55 1.0 7.78 50 112 13.4 0.068 (+) 1N6271A 1.5KE10A 9.5010.5 1.0 8.55 10 103 14.5 0.073 (+) 1N6272A 1.5KE11A 10.511.6 1.0 9.40 5.0 96.2 15.6 0.075 (+) 1N6273A 1.5KE12A 11.412.6 1.0 10.2 5.0 89.8 16.7 0.078 (+) 1N6274A 1.5KE13A 12.413.7 1.0 11.1 5.0 82.4 18.2 0.081 (+) 1N6275A 1.5KE15A 14.315.8 1.0 12.8 1.0 70.8 21.2 0.084 (+) 1N6276A 1.5KE16A 15.216.8 1.0 13.6 1.0 66.7 22.5 0.086 (+) 1N6277A 1.5KE18A 17.118.9 1.0 15.3 1.0 59.5 25.2 0.089 (+) 1N6278A 1.5KE20A 19.021.0 1.0 17.1 1.0 54.2 27.7 0.090 (+) 1N6279A 1.5KE22A 20.923.1 1.0 18.8 1.0 49.0 30.6 0.092 (+) 1N6280A 1.5KE24A 22.825.2 1.0 20.5 1.0 45.2 33.2 0.094 (+) 1N6281A 1.5KE27A 25.728.4 1.0 23.1 1.0 40.0 37.5 0.096 (+) 1N6282A 1.5KE30A 28.531.5 1.0 25.6 1.0 36.2 41.4 0.097 (+) 1N6283A 1.5KE33A 31.434.7 1.0 28.2 1.0 32.8 45.7 0.098 (+) 1N6284A 1.5KE36A 34.237.8 1.0 30.8 1.0 30.1 49.9 0.099 (+) 1N6285A 1.5KE39A 37.141.0 1.0 33.3 1.0 27.8 53.9 0.100 (+) 1N6286A 1.5KE43A 40.945.2 1.0 36.8 1.0 25.3 59.3 0.101 (+) 1N6287A 1.5KE47A 44.749.4 1.0 40.2 1.0 23.1 64.8 0.101 (+) 1N6288A 1.5KE51A 48.553.6 1.0 43.6 1.0 21.4 70.1 0.102 (+) 1N6289A 1.5KE56A 53.258.8 1.0 47.8 1.0 19.5 77.0 0.103 (+) 1N6290A 1.5KE62A 58.965.1 1.0 53.0 1.0 17.6 85.0 0.104 (+) 1N6291A 1.5KE68A 64.671.4 1.0 58.1 1.0 16.3 92.0 0.104 (+) 1N6292A 1.5KE75A 71.378.8 1.0 64.1 1.0 14.6 104 0.105 (+) 1N6293A 1.5KE82A 77.986.1 1.0 70.1 1.0 13.3 113 0.105 (+) 1N6294A 1.5KE91A 86.595.5 1.0 77.8 1.0 12.0 125 0.106 (+) 1N6295A 1.5KE100A 95.0105 1.0 85.5 1.0 10.9 137 0.106 (+) 1N6296A 1.5KE110A 105116 1.0 94.0 1.0 9.9 152 0.107 (+) 1N6297A 1.5KE120A 114126 1.0 102 1.0 9.1 165 0.107 (+) 1N6298A 1.5KE130A 124137 1.0 111 1.0 8.4 179 0.107 (+) 1N6299A 1.5KE150A 143158 1.0 128 1.0 7.2 207 0.106 (+) 1N6300A 1.5KE160A 152168 1.0 136 1.0 6.8 219 0.108 (+) 1N6301A 1.5KE170A 162179 1.0 145 1.0 6.4 234 0.108 (+) 1N6302A 1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108 (+) 1N6303A 1.5KE200A 190 210 1.0 171 1.0 5.5 274 0.108 (+) - 1.5KE220A 209 231 1.0 185 1.0 4.6 328 0.108 - 1.5KE250A 237263 1.0 214 1.0 4.4 344 0.110 - 1.5KE300A 285315 1.0 256 1.0 3.6 414 0.110 - 1.5KE350A 333368 1.0 300 1.0 3.1 482 0.110 - 1.5KE400A 380420 1.0 342 1.0 2.7 548 0.110 - 1.5KE440A 418462 1.0 376 1.0 2.5 602 0.110 - 1.5KE480A 456504 1.0 408 1.0 2.28 658 0.110 - 1.5KE510A 485535 1.0 434 1.0 2.15 698 0.110 - 1.5KE540A 513567 1.0 459 1.0 2.03 740 0.110 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bidirectional types with V 10 V and less the I limit is doubled R D (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both unidirectional and bidirectional devices Revision: 21-Sep-2020 Document Number: 88301 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000