1.5SMC Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional 1500 W peak pulse power capability with a Available 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response time Low incremental surge resistance SMC (DO-214AB) Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PRIMARY CHARACTERISTICS V (uni-directional) 5.8 V to 459 V WM V (bi-directional) 5.8 V to 185 V TYPICAL APPLICATIONS WM V (uni-directional) 6.8 V to 540 V BR Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning V (bi-directional) 6.8 V to 220 V BR on ICs, MOSFET, signal lines of sensor units for consumer, P 1500 W PPM computer, industrial, automotive, and telecommunication. P 6.5 W D I (uni-directional only) 200 A FSM MECHANICAL DATA T max. 150 C J Case: SMC (DO-214AB) Polarity Uni-directional, bi-directional Molding compound meets UL 94 V-0 flammability rating Package SMC (DO-214AB) Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3 X - halogen-free, RoHS-compliant, and DEVICES FOR BI-DIRECTION APPLICATIONS AEC-Q101 qualified ( X denotes revision code e.g. A, B, ..... and only available For bi-directional devices use CA suffix (e.g. 1.5SMC220CA). for 250 V to 540 V type) Electrical characteristics apply in both directions. Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1) P 1500 W PPM (1) Peak pulse current with a 10/1000 s waveform (fig. 3) I See next table A PPM Power dissipation on infinite heatsink at T = 50 C P 6.5 W A D (2) Peak forward surge current 8.3 ms single half sine-wave uni-directional only I 200 A FSM Operating junction and storage temperature range T , T -65 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on 0.31 x 0.31 (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 11-Jul-17 Document Number: 88303 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 1.5SMC Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM DEVICE MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK MARKING CLAMPING TEMPERATURE (1) PART V AT I CURRENT VOLTAGE LEAKAGE PULSE BR T CODE VOLTAGE COEFFICIENT NUMBER (V) I V AT V CURRENT T WM WM AT I OF V PPM BR (4) (2) (mA) (V) I I D PPM V (V) (%/C) UNI BI MIN. MAX. C (A) (A) 1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 143 10.5 0.057 1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 133 11.3 0.061 1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 124 12.1 0.065 1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075 1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078 1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081 1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084 1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086 1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089 1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090 1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092 1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.090 1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096 1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097 1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098 1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099 1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100 1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101 1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101 1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102 1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103 1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104 1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104 1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105 1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105 1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106 1.5SMC100A 100A 100C 95.0 105 1.0 85.5 1.0 10.9 137 0.106 1.5SMC110A 110A 110C 105 116 1.0 94.0 1.0 9.9 152 0.107 1.5SMC120A 120A 120C 114 126 1.0 102 1.0 9.1 165 0.107 1.5SMC130A 130A 130C 124 137 1.0 111 1.0 8.4 179 0.107 1.5SMC150A 150A 150C 143 158 1.0 128 1.0 7.2 207 0.106 1.5SMC160A 160A 160C 152 168 1.0 136 1.0 6.8 219 0.108 1.5SMC170A 170A 170C 162 179 1.0 145 1.0 6.4 234 0.108 1.5SMC180A 180A 180C 171 189 1.0 154 1.0 6.1 246 0.108 1.5SMC200A 200A 200C 190 210 1.0 171 1.0 5.5 274 0.108 1.5SMC220A 220A 220C 209 231 1.0 185 1.0 4.6 328 0.108 1.5SMC250A 250A - 237 263 1.0 214 1.0 4.4 344 0.110 1.5SMC300A 300A - 285 315 1.0 256 1.0 3.6 414 0.110 1.5SMC350A 350A - 333 368 1.0 300 1.0 3.1 482 0.110 1.5SMC400A 400A - 380 420 1.0 342 1.0 2.7 548 0.110 1.5SMC440A 440A - 418 462 1.0 376 1.0 2.5 602 0.110 1.5SMC480A 480A - 456 504 1.0 408 1.0 2.28 658 0.110 1.5SMC510A 510A - 485 535 1.0 434 1.0 2.15 698 0.110 1.5SMC540A 540A - 513 567 1.0 459 1.0 2.03 740 0.110 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V of 10 V and less, the I limit is doubled R D (5) V = 3.5 V at I = 100 A (uni-directional only) F F Revision: 11-Jul-17 Document Number: 88303 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000