195D
www.vishay.com
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT, Conformal Coated
FEATURES
8 mm, 12 mm tape packaging to EIA-481
reeling per IEC 60286-3.
Available
7" (178 mm) standard 13" (330 mm) available
Available
US and European case sizes available
Terminations: 100 % tin (2) standard,
Available
tin / lead available
Available
All cases except R case are halogen-free
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE / ELECTRICAL CHARACTERISTICS
www.vishay.com/doc?40194 Capacitance Tolerance: 10 %, 20 % standard
Operating Temperature: -55 C to +125 C Voltage Rating: 2 V to 50 V
DC DC
(above 85 C, voltage derating is required)
Moisture Sensitivity Level 2a
Capacitance Range: 0.1 F to 330 F
ORDERING INFORMATION
195D 106 X0 004 S 2 T
TYPE CAPACITANCE CAPACITANCE DC VOLTAGE CASE CODE TERMINATION PACKAGING
TOLERANCE RATING AT +85 C
This is expressed X0 = 20 % This is expressed in See Ratings Style 2 is standard T = tape and reel
in picofarads. X9 = 10 % volts. To complete and Case 2 = 100 % tin 7" [178 mm] reel
The first two digits X5 = 5 % the three-digit Codes table 4 = gold plated standard.
are the significant (Special order) block, zeros 8 = solder plated For H case size
figures. The third precede the voltage (60/40) lengthwise
is the number of rating. A decimal Special order W = tape and reel
zeros to follow. point is indicated by 13" [330 mm] reel
an R (6R3 = 6.3 V). available
See Standard Packaging
Quantity table
Note
Preferred tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size
Revision: 14-Jun-2019 Document Number: 40001
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
195D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
Tantalum wire
nib identifie s
anode (+)
W
terminal
C
L
B
D
J
REF. J
MAX. MAX.
A
H
CASE
L W H A B C (MIN.) D (REF.) J (MAX.)
CODE
STANDARD CASE CODES
0.087 max. 0.045 0.010 0.045 0.010 0.016 0.008 0.042 0.010 0.063 0.004
C -
[2.21 max.] [1.14 0.25] [1.14 0.25] [0.40 0.20] [1.07 0.25] [1.60] [0.10]
0.143 max. 0.072 0.008 0.048 0.008 0.023 0.010 0.085 0.015 0.114 0.004
S -
[3.63 max.] [1.83 0.20] [1.22 0.20] [0.58 0.25] [2.16 0.37] [2.90] [0.10]
0.143 max. 0.104 0.010 0.051 0.010 0.023 0.010 0.085 0.015 0.114 0.004
V -
[3.63 max.] [2.65 0.25] [1.30 0.25] [0.58 0.25] [2.16 0.37] [2.90] [0.10]
0.285 max. 0.104 0.010 0.051 0.010 0.039 0.020 0.200 0.027 0.244 0.004
X -
[7.24 max.] [2.65 0.25] [1.30 0.25] [1.00 0.50] [5.08 0.69] [6.20] [0.10]
0.285 max. 0.104 0.010 0.069 0.010 0.039 0.020 0.200 0.027 0.244 0.004
Y -
[7.24 max.] [2.65 0.25] [1.75 0.25] [1.00 0.50] [5.08 0.69] [6.20] [0.10]
0.285 max. 0.104 0.010 0.104 0.010 0.039 0.020 0.200 0.027 0.244 0.004
Z -
[7.24 max.] [2.65 0.25] [2.65 0.25] [1.00 0.50] [5.08 0.69] [6.20] [0.10]
0.283 max. 0.236 + 0.012 / - 0.024 0.138 0.012 0.051 0.012 0.181 0.025 0.244 0.004
R -
[7.20 max.] [6.0 + 0.30 / - 0.60] [3.50 0.30] [1.30 0.30] [4.60 0.60] [6.20] [0.10]
EUROPEAN CASE CODES
0.110 0.008 0.0591 0.012 0.055 max. 0.028 0.012 0.063 0.012 0.012
A --
[2.80 0.20] [1.5 0.30] [1.40 max.] [0.70 0.30] [1.60 0.30] [0.3]
0.165 0.008 0.055 0.012 0.063 max. 0.031 0.012 0.098 0.012 0.012
B --
[4.20 0.20] [1.4 0.30] [1.6 max.] [0.80 0.30] [2.50 0.30] [0.3]
0.165 0.008 0.083 0.012 0.063 max. 0.031 0.012 0.098 0.012 0.02
D --
[4.20 0.20] [2.1 0.30] [1.6 max.] [0.80 0.30] [2.50 0.30] [0.5]
0.217 0.012 0.083 0.012 0.067 max. 0.039 0.012 0.126 0.012 0.031
E --
[5.50 0.30] [2.1 0.30] [1.70 max.] [1.00 0.30] [3.20 0.30] [0.8]
0.236 0.012 0.130 0.012 0.079 max. 0.039 0.012 0.142 0.012 0.031
F --
[6.0 0.30] [3.3 0.30] [2.00 max.] [1.00 0.30] [3.60 0.30] [0.8]
0.276 0.012 0.102 0.012 0.110 max. 0.039 0.012 0.177 0.012 0.031
G --
[7.00 0.30] [2.6 0.30] [2.80 max.] [1.00 0.30] [4.5 0.30] [0.8]
0.307 0.012 0.146 0.012 0.118 max. 0.039 0.012 0.197 0.012 0.031
H --
[7.80 0.30] [3.7 0.30] [3.0 max.] [1.00 0.30] [5.00 0.30] [0.8]
Note
The anode termination (D less B) will be a minimum of 0.010" (0.25 mm), C case = 0.005" (0.131 mm) minimum
Revision: 14-Jun-2019 Document Number: 40001
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000