20108D1X103K5P Vishay

CS201 www.vishay.com Vishay Dale Thick Film Capacitor Networks, Single-In-Line, Conformal Coated SIP FEATURES Isolated and bussed schematics available Available X7R and C0G capacitors available Multiple isolated capacitors Multiple capacitors, common ground Custom design capability D 0.300 (7.62 mm) package height Available (maximum) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS CAPACITANCE CAPACITANCE CAPACITANCE VISHAY RANGE TOLERANCE VOLTAGE DALE PROFILE SCHEMATIC (-55 C to +125 C) at 85 C MODEL (1) C0G X7R % V DC CS201 D 1 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 CS201 D 3 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 CS201 D 4 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50 Note (1) C0G capacitors may be substituted for X7R capacitors TECHNICAL SPECIFICATIONS MATERIAL SPECIFICATIONS CS201 Marking resistance Permanency testing per MIL-STD-202, PARAMETER UNIT to solvents method 215 C0G X7R Solderability Per MIL-STD-202, method 208E ppm/C Temperature coefficient High alumina, epoxy coated or 30 ppm/C 15 % Body (-55 C to +125 C) (flammability UL 94 V-0) % Terminals Phosphorus-bronze, solder plated Dissipation factor Pin 1 identifier, Dale or D, part number % 0.15 2.5 Marking (maximum) (abbreviated as space allows), date code GLOBAL PART NUMBER INFORMATION New Global Part Numbering: 20108D1C103K5P (preferred part numbering format) 2 0 1 0 8 D 1 C 1 0 3 K 5 P GLOBAL PIN PACKAGE CAPACITANCE SCHEMATIC CHARACTERISTIC TOLERANCE VOLTAGE PACKAGING SPECIAL MODEL COUNT HEIGHT VALUE 201 = CS201 04 to 18 pin D = D 1 C = C0G (in picofarads) 2 K = 10 % 5 = 50 V E = lead (Pb)-free, Blank = standard available profile 3 X = X7R digit significant M = 20 % S = special bulk (dash number) 04 = 4 pin 4 S = special figure, followed S = special P = tin / lead, bulk (up to 3 digits) 08 = 8 pin 0 = special by a multiplier From 1 to 999 18 = 18 pin 330 = 33 pF as applicable 392 = 3900 pF 104 = 0.1 F Historical Part Number example: CS20108D1C103K5 (will continue to be accepted) CS201 08 D 1 C 103 K 5 P03 HISTORICAL PIN PACKAGE CAPACITANCE SCHEMATIC CHARACTERISTIC TOLERANCE VOLTAGE PACKAGING MODEL COUNT HEIGHT VALUE Note For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc 31542) Revision: 24-Jan-2019 Document Number: 31522 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CS201 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.085 (2.160) Typ. L 0.050 (1.27) Max. Typ. 0.135 (3.43) Max. 0.300 (7.62) Max. Seating Plane 0.010 0.002 for 0.040 (1.016) Hole 0.020 0.002 (0.254 0.051) 0.007 (0.178) Ref. (0.508 0.051) 0.135 + 0.015 - 0.010 0.100 0.005 (2.54 0.127) 0.050 (1.27) (3.43 + 0.381 - 0.254) Non-Cumulative at Point of Egress Pin 1 is extreme left-hand terminal on side with marking. NUMBER L NUMBER L NUMBER L OF PINS MAXIMUM OF PINS MAXIMUM OF PINS MAXIMUM 4 pin 0.400 (10.16) 9 pin 0.900 (22.86) 14 pin 1.400 (35.56) 5 pin 0.500 (12.70) 10 pin 1.000 (25.40) 15 pin 1.500 (38.10) 6 pin 0.600 (15.24) 11 pin 1.100 (27.94) 16 pin 1.600 (40.64) 7 pin 0.700 (17.78) 12 pin 1.200 (30.48) 17 pin 1.700 (43.18) 8 pin 0.800 (20.32) 13 pin 1.300 (33.02) 18 pin 1.800 (45.72) SCHEMATICS Schematic 1 Schematic 3 Schematic 4 1 2 3 4 n-1 n 1 2 3 4 5 6 n-1 n 12 34 56 78 n-1 n Common Bus - 2 Ground Leads Isolated Capacitor Sections Common Bus - 1 Ground Lead Revision: 24-Jan-2019 Document Number: 31522 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000