20LHE1AWA1P30 Vishay

20 LHE www.vishay.com Vishay Sfernice Linear Position Sensor in Hall Effect Technology (0 mm to 10 mm max.) FEATURES Accurate linearity down to: 1 % Electrical strokes from 0 mm to 10 mm Long life: Greater than 10M cycles Non contacting technology: Hall effect Model dedicated to all applications in harsh environments Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA Sensor type LINEAR, non contacting hall effect Output type Wires Market appliance Industrial Dimensions 46 mm x 20.8 mm x 37 mm ELECTRICAL SPECIFICATIONS PARAMETER STANDARD Electrical stroke Up to 10 mm Linearity 2 % or 1 % Supply voltage 5 V 10 % DC Supply current < 16 mA typical Output signal Analog ratiometric 10 % to 90 % of V or PWM 10 % to 90 % duty cycle supply Over voltage protection +20 V DC Reverse voltage protection -10 V DC Load resistance recommanded Min. 1 k for analog output and PWM output Hysteresis Static: 0.1 % of V /Dynamic: 0.25 % of V supply supply Resolution 12 bits MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 12 mm max. Bearing type Sleeve bearing Standard For spring loaded model: IP 51/without spring: Other on request Weight 26 g 4 g ORDERING INFORMATION/DESCRIPTION 20 LHE 1 A W A 1P30 xxxx e1 OUTPUT OUTPUT SHAFT SPECIAL LEAD MODEL FEATURES LINEARITY TYPE SIGNAL TYPE REQUEST FINISH 1: Spring return X: 2 % W: Wires A: Analog increasing 1: 3.175 mm 2: Without spring A: 1 % Z: Custom B: Analog decreasing 9: Special C: PWM increasing P: Plain D: PWM decreasing T: Threaded M3 x 6 Z: Other type Shaft length from mounting face 30 mm when full extended SAP PART NUMBERING GUIDELINES 20 LHE 2 X Z C 1T35 xxxx OUTPUT SHAFT SPECIAL MODEL FEATURES LINEARITY OUTPUT SIGNAL TYPE TYPE REQUEST Without spring return system 2 % Custom PWM increasing Revision: 27-Mar-15 Document Number: 57115 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 20 LHE www.vishay.com Vishay Sfernice V ANALOG OUT V V out out (% V ) (% V ) supply supply Diagnostic High Area Diagnostic High Area Diag High Level Diag High Level 90 % 90 % 10 % 10 % Diag Low Level Diag Low Level Diagnostic Low Area Diagnostic Low Area 0 (Position) 0 (Position) Increasing Decreasing Code A Code B V PWM OUT V out (% V ) supply 90 % T high T high Duty Cycle = T T low 10 % 0 Time (s) T: periodicity ENVIRONMENTAL SPECIFICATIONS Vibrations 20 g from 10 Hz to 2000 Hz Shocks 3 shocks/axis 50 g half a sine 11 ms Operating temperature range -40 C +85 C Life > 10M of cycles Speed (max.) 60 mm/s 200 V/m 150 kHz/1 GHz Immunity to radiated electromagnetic disturbances IEC 62132-2 part 2 (level A) 200 A/m 50 Hz/60 Hz Immunity to power frequency magnetic field EN 61000-4-8 30 MHz/1 GHz < 30 dBV/m Radiated electromagnetic emissions EN 61000-6-4 Contact discharges: 4 kV Electrostatic discharges Air discharges: 8 kV EN 61000-4-2 10 V/m Immunity to radiated RF field 80 MHz to 1 GHz EN6100-4-3 Revision: 27-Mar-15 Document Number: 57115 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000