34 THE www.vishay.com Vishay Spectrol Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) FEATURES All electrical angles available up to: 3600 Accurate linearity down to: 0.5 % Very long life: 50M cycles for servo, 10M cycles for bushing Non contacting technology: Hall effect true power on sensor Model dedicated to applications requiring long life QUICK REFERENCE DATA Material categorization: For definitions of compliance Sensor type Multi Turn ROTATIONAL, hall effect please see www.vishay.com/doc 99912 Output type Wires or rear turrets Market appliance Industrial Dimensions 7/8 (22.2 mm) ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical angle 10 turns 3600 Any other angle upon request Linearity 1 % 0.5 % Supply voltage 5 V 10 % Other upon request DC Supply current < 16 mA for single < 32 mA for redundant Analog ratiometric 1 % to 99 % of V (other on request) supply Output signal or PWM 1 kHz, 10 % to 90 % duty cycle or SPI binary on 5 V or binary on 3.3 V Over voltage protection + 20 V DC Reverse voltage protection - 10 V DC Load resistance recommended Min. 1 k for analog output and PWM output Hysteresis static 10 on drive shaft MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 3600 continuous Bearing type A sleeve bearing for bushing model/2 ball bearings for servo model Standard IP 50 other on request Resolution 12 bits for analog and PWM, 14 bits for SPI ORDERING INFORMATION/DESCRIPTION 34 THE B 1 A T A 2S22 XXXX BO 1 e1 MOUNTING NUMBER OF OUTPUT OUTPUT SHAFT SPECIAL LEAD MODEL LINEARITY PACKAGING TYPE SIGNALS TYPE SIGNAL TYPE REQUEST FINISH B: Bushing 1: Single A: 1 % T: Turrets A: Analog CW 2: 3.175 mm Box of S: Servo 2: Redundant B: 0.5 % Z: Custom B: Analog CCW 9: Special 1 piece W: Wires C: PWM CW P: Plain D: PWM CCW S: Slotted (1) E: SPI CW Z: Other type (1) F: SPI CCW G: Analog inverted slope H: PWM inverted slope K: SPI inverted (1) slope Z: Other output Shaft length from mounting face standard: 22 mm Note (1) SPI output output type: Wires SAP PART NUMBERING GUIDELINES 34 THE S 2 B T C 2P12 XXXX SERVO 2 OUTPUT OUTPUT OUTPUT SHAFT SPECIAL MODEL LINEARITY TYPE SIGNALS TYPE SIGNAL TYPE REQUEST B: 0.5 % Revision: 25-Jul-12 Document Number: 57114 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 34 THE www.vishay.com Vishay Spectrol V ANALOG OUT Single Output (output signal code: A) 99 % Output S1 50 % 1 % 0 1800 3600 Direction of Running () Redundant Output: with inverted slope (output signal code: G) 99 % Output S1 50 % Output S2 1 % 0 1800 3600 Direction of Running () V PWM OUT Single Output: (output signal code: C) V out (% V ) supply CW 97 % min. T high T high Duty Cycle = T T low 1.5 % max. 0 Time T: Periodicity V SPI OUT Notice on demand Output signal code: E if CW (single or redundant identical) Output signal code: F if CCW (single or redundant identical) Output signal code: K if CW (if redundant but inverted slope) Revision: 25-Jul-12 Document Number: 57114 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 V (% V ) V (% V ) out supply out supply