517D105M160AA6AE3 Vishay

Not for New Designs 517D www.vishay.com Vishay Sprague Aluminum Capacitors +105 C, General Purpose Miniature, Radial Lead FEATURES High CV per case size Low cost Solvent resistant construction (through 100 WV ) DC Life test to 2000 h at +105 C Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA RIPPLE CURRENT MULTIPLIERS TEMPERATURE DESCRIPTION VALUE Nominal case size 0.197 x 0.433 5.0 x 11.0 AMBIENT TEMPERATURE MULTIPLIERS D x L in mm to 0.709 x 1.575 18.0 x 40.0 +70 C 1.78 -55 C to +105 C +85 C 1.4 (6.3 WV to 100 WV ) DC DC Operating temperature +105 C 1.0 -40 C to +105 C (160 WV to 250 WV ) DC DC FREQUENCY (Hz) Rated capacitance range, C 0.47 F to 15 000 F R 50 to 100 to 300 to WV CAP. (F) 1 kHz 10 kHz DC 60 120 400 Tolerance on C 20 % R Rated voltage range, U 6.3 WV to 250 WV 0 to 47 0.75 1 1.35 1.57 2.00 R DC DC 6.3 to 100 to 470 0.80 1 1.23 1.34 1.50 Termination 2 radial leads 100 2000 h: CAP 20 % from 1000 to 0.85 1 1.10 1.13 1.15 initial measurement. 22 000 000 Life validation test at 105 C DF 2 x initial specified limit. 160 to DCL initial specified limit. 0.47 to 100 0.80 1 1.25 1.40 1.60 250 1000 h: CAP 20 % from initial measurement. Shelf life at 105 C DF 2 x initial specified limit. LOW TEMPERATURE PERFORMANCE DCL initial specified limit. (T) (+20 C) MAXIMUM IMPEDANCE RATIO Z /Z Rated voltage for 1 min for MAXIMUM AT 120 Hz 6.3 WV to 100 WV units: DC DC I < 0.03 CV or 4 A RATED VOLTAGE Z - 25 C / Z + 20 C Z - 40 C / Z + 20 C (whichever is greater). (WV ) DC Rated voltage for 2 min for 6.3 4.0 8.0 6.3 WV to 100 WV units: DC DC DC leakage current I < 0.04 CV or 3 A 10.0 3.0 6.0 (whichever is greater). 16.0 2.0 4.0 Rated voltage for 1 min for 160 WV to 250 WV units: DC DC 25.0 to 100.0 2.0 3.0 I < 0.1 CV + 40 A and CV > 1000 160.0 to 200.0 2.0 4.0 I < 0.04 CV + 100 A and CV > 1000 250.0 4.0 6.0 DIMENSIONS in inches millimeters CASE NOMINAL CASE SIZE LEAD SPACING NOMINAL LEAD DIAMETER TYPICAL WEIGHT CODE D x L S D (g) JA 0.197 x 0.433 5.0 x 11.0 0.079 2.0 0.020 0.50 0.44 AA 0.248 x 0.433 6.3 x 11.0 0.098 2.5 0.020 0.50 0.63 BB 0.315 x 0.453 8.0 x 11.5 0.138 3.5 0.024 0.60 1.03 CC 0.394 x 0.492 10.0 x 12.5 0.197 5.0 0.024 0.60 1.53 CD 0.394 x 0.630 10.0 x 16.0 0.197 5.0 0.024 0.60 1.86 CG 0.394 x 0.787 10.0 x 20.0 0.197 5.0 0.024 0.60 2.48 DG 0.492 x 0.787 12.5 x 20.0 0.197 5.0 0.024 0.60 3.98 DK 0.492 x 0.984 12.5 x 25.0 0.197 5.0 0.024 0.60 5.27 Revision: 04-May-2018 Document Number: 42053 1 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not for New Designs 517D www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters CASE NOMINAL CASE SIZE LEAD SPACING NOMINAL LEAD DIAMETER TYPICAL WEIGHT CODE D x L S D (g) EK 0.630 x 0.984 16.0 x 25.0 0.295 7.5 0.031 0.80 7.72 EN 0.630 x 1.24 16.0 x 31.5 0.295 7.5 0.031 0.80 9.90 ER 0.630 x 1.40 16.0 x 35.5 0.295 7.5 0.031 0.80 11.10 FR 0.709 x 1.40 18.0 x 35.5 0.295 7.5 0.031 0.80 13.04 FV 0.709 x 1.575 18.0 x 40.0 0.295 7.5 0.031 0.80 15.74 ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches millimeters 0.177 Code S Code F Code S 0.177 4.5 4.5 0.177 X X 4.5 0.197 0.20 0.197 0.20 (1) 0.197 0.20 (1) (1) D F 5.0 0.5 D F D F 5.0 0.5 5.0 0.5 (2) d (2) (2) d d 0.177 Code C Code S Code S 4.5 0.033 0.006 0.039 0.008 D S 0.20 0.5 0.85 0.15 1.0 0.2 (2) d (4, 5, 6.3, 8) (10, 12.5, 16, 18) DIMENSIONS in inches millimeters DIMENSIONS FORMING METHOD FORMED LEAD CODE DS X (Max.) 0.197 5.0 0.197 5.0 0.059 1.5 Formed and cut F 0.248 6.3 0.197 5.0 0.098 2.5 0.315 8.0 0.197 5.0 0.098 2.5 0.394 10.0 0.197 5.0 - 0.492 12.5 0.197 5.0 - Cut C 0.630 16.0 0.295 7.5 - 0.709 18.0 0.295 7.5 - 0.197 5.0 0.197 5.0 0.059 1.5 0.248 6.3 0.197 5.0 0.059 1.5 0.315 8.0 0.197 5.0 0.059 1.5 Snap-in S 0.394 10.0 0.197 5.0 - 0.492 12.5 0.197 5.0 - 0.630 16.0 0.295 7.5 - 0.709 18.0 0.295 7.5 - Notes Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded 6) (1) Formed lead (2) Lead thickness d depends on capacitor specification Revision: 04-May-2018 Document Number: 42053 2 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000