536-1-1-101 Vishay

Model 536 www.vishay.com Vishay Spectrol 7 / (22.2 mm) Ten Turn Wirewound 8 Precision Potentiometer with a Plastic Shaft FEATURES 10 standard resistance values Plastic shaft Rugged integrated construction 0.25 % linearity Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, multi turn wirewound Output type Output by turrets Market appliance Industrial 7 Dimensions / (22.2 mm) 8 ELECTRICAL SPECIFICATIONS PARAMETER Total resistance Range 100 to 100 k , tolerance 5 % Linearity (independent) 0.25 % Noise 100 ENR maximum +10 Electrical angle 3600 - 0 Power rating 2.0 W at 70 C derated to zero at 125 C Insulation resistance 1000 M minimum, 500 V DC Dielectric strength 1000 V , 60 Hz RMS Absolute minimum resistance Not to exceed 0.10 % of total resistance or 1 , whichever is greater Temperature coefficient 20 ppm/C (wire only) End voltage 0.25 % of total applied voltage maximum ORDERING INFORMATION 536 B 103 MODEL STYLE OHMIC VALUE SPECIAL REQUEST 536 B: bushing 470 = 47 xxxx 222 = 2.200 103 = 10 k For ohmic value range see electrical specification PART NUMBER DESCRIPTION (for information only) 536- 1- 103 xxxx MODEL STYLE OHMIC VALUE SPECIAL B: 1 Revision: 30-Jun-15 Document Number: 57066 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 536 www.vishay.com Vishay Spectrol DIMENSIONS in inches (millimeters) BUSHING MOUNT: 536B/536-1 0.015 0.031 0.750 0.812 (19.05) (20.62) 0.015 0.312 0.030 MAX. (0.76) (7.92) 3 / - 32 UNEF - 2A 0.062 8 (1.57) 0.200 MIN. (5.08) 30 0.625 R 1 3 2 MAX. (15.88) 0.015 + 0.0000 0.875 - 0.0020 0.4062 (22.22) (10.32) + 0.000 - 0.002 0.250 (6.35) SCREWDRIVER SLOT 0.032 WIDE x 0.032 0.010 DEEP (0.81 x 0.81) METRIC SHAFT/BUSHING THREAD 9 mm: 0.75 P 2 + 0.00 CW - 0.05 6.00 1 3 SCHEMATIC TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2 MECHANICAL SPECIFICATIONS PARAMETER +10 Rotation 3600 - 0 STARTING RUNNING Torque (maximums) 0.5 oz. - in (36.00 g - cm) 0.4 oz. - in (28.80 g - cm) Mechanical runouts Shaft (TIR) 0.005 (0.13 cm) Pilot dia. (TIR) 0.003 (0.08 cm) Lateral runout (TIR) 0.005 (0.13 cm) Shaft end play 0.010 (0.25 cm) Shaft radial play 0.005 (0.13 cm) Weight (maximum) 0.75 oz. (21.26 g) Stop strength 75 oz. - in (static) (5.4 kg - cm) Revision: 30-Jun-15 Document Number: 57066 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000