550D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX Capacitors for High Frequency Power Supplies FEATURES Terminations: tin / lead (SnPb), Available 100 % tin (RoHS-compliant) Available Hermetically-sealed, axial-lead solid tantalum capacitors Small size and long life PERFORMANCE CHARACTERISTICS Exceptional capacitance stability and excellent resistance Operating Temperature: -55 C to +125 C to severe environmental conditions (above 85 C, voltage derating is required) The military equivalent of the 550D is the M39003/09 (style Capacitance Tolerance: at 1 kHz, +25 C CSR21) which is qualified to MIL-PRF-39003/9 20 %, 10 % standard. 5 % available as special Material categorization: for definitions of compliance Dissipation Factor: at 1 kHz, +25 C. please see www.vishay.com/doc 99912 Dissipation factor, as determined from the expression 2fC , shall not exceed the values listed in the standard Note R * This datasheet provides information about parts that are ratings tables RoHS-compliant and / or parts that are non RoHS-compliant. For DC Leakage Current (DCL Max.): example, parts with lead (Pb) terminations are not RoHS-compliant. at +25 C: leakage current shall not exceed the values listed Please see the information / tables in this datasheet for details in the Standard Ratings table at +85 C: leakage current shall not exceed 10 times the APPLICATIONS values listed in the Standard Ratings table Designed for power supply filtering applications at above at +125 C: leakage shall not exceed 15 times the values 100 kHz. listed in the standard ratings tables Life Test: capacitors shall withstand rated DC voltage applied at +85 C for 2000 h or derated DC voltage applied at +125 C for 1000 h Following the life test: 1. DCL shall not exceed 125 % of the initial requirements 2. Dissipation factor shall meet the initial requirement 3. Change in capacitance shall not exceed 5 % ORDERING INFORMATION 550D 157 X0 006 R 2 T E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE PACKAGING RoHS- TOLERANCE AT +85 C CODE NUMBER COMPLIANT This is expressed in X0 = 20 % This is expressed See 2 = B = bulk (tray) E3 = 100 % tin picofarads. The first two X9 = 10 % in volts. To complete Ratings insulated pack termination digits are the significant X5 = 5 % * the three-digit block, and Case sleeve T = tape and (RoHS-compliant) figures. The third is the * Special order zeros precede the Codes reel Blank = SnPb number of zeros to voltage rating. table G = ammo termination follow. Standard pack capacitance ratings are in accordance with EIA preferred number series wherever possible. Revision: 16-Nov-17 Document Number: 40017 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 550D www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters 1.500 0.250 1.500 0.250 D 38.10 6.35 38.10 6.35 dia. L 1 Positive lead - + 0.047 1.19 max. Solid tinned 0.125 3.18 max. J nickel leads max. D L LEAD SIZE 1 CASE J (MAX.) CODE (1) WITH INSULATING SLEEVE AWG NO. NOMINAL DIA. R 0.289 0.016 7.34 0.41 0.686 0.031 17.42 0.79 0.822 20.880 22 0.025 0.64 S 0.351 0.016 8.92 0.41 0.786 0.031 19.96 0.79 0.922 23.420 22 0.025 0.64 Note (1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body STANDARD RATINGS MAX. DCL MAX. DF MAX. ESR CAPACITANCE CASE CODE PART NUMBER AT +25 C AT +25 C AT +25 C (F) (A) 1 kHz (%) 100 kHz ( ) 6 V AT +85 C, SURGE = 8 V 4 V AT +125 C, SURGE = 5 V DC DC 150 R 550D157(1)006R2(2)(3) 9 10 0.065 180 R 550D187(1)006R2(2)(3) 11 10 0.060 220 S 550D227(1)006S2(2)(3) 12 10 0.055 270 S 550D277(1)006S2(2)(3) 13 10 0.050 330 S 550D337(1)006S2(2)(3) 15 12 0.045 10 V AT +85 C, SURGE = 13 V 7 V AT +125 C, SURGE = 9 V DC DC 82 R 550D826(1)010R2(2)(3) 8 8 0.085 100 R 550D107(1)010R2(2)(3) 10 8 0.075 120 R 550D127(1)010R2(2)(3) 12 8 0.070 150 S 550D157(1)010S2(2)(3) 15 8 0.065 180 S 550D187(1)010S2(2)(3) 18 8 0.060 220 S 550D227(1)010S2(2)(3) 20 10 0.055 15 V AT +85 C, SURGE = 20 V 10 V AT +125 C, SURGE = 12 V DC DC 56 R 550D566(1)015R2(2)(3) 8 6 0.100 68 R 550D686(1)015R2(2)(3) 10 6 0.095 82 S 550D826(1)015S2(2)(3) 12 6 0.085 100 S 550D107(1)015S2(2)(3) 15 8 0.075 120 S 550D127(1)015S2(2)(3) 18 8 0.070 150 S 550D157(1)015S2(2)(3) 20 8 0.065 Note Part number definitions: (1) Tolerance: for 10 % tolerance specify X9 for 20 % specify X0 for 5 % X5 (special order) (2) Packaging options: B = bulk (tray), T = tape and reel, G = ammo pack (3) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40017 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000