592W www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated Application Specific Pulse Capacitor for Wireless Modems FEATURES Robust design for use in wireless modem applications Designed specifically for pulsed operation 100 % surge current tested Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C Capacitance Range: 330 F to 2200 F (above 40 C, voltage derating is required) Voltage Rating: 6.3 V to 10 V DC DC Capacitance Tolerance: 20 % standard Moisture Sensitivity Level 2a ORDERING INFORMATION 592W 757 X0 010 M 2 T 20H TYPE CAPACITANCE CAPACITANCE DC VOLTAGE CASE TERMINATION REEL SIZE AND SUFFIX TOLERANCE RATING AT +85 C CODE PACKAGING This is expressed X0 = 20 % This is expressed in See Ratings 2 = 100 % tin T = 7 178 mm reel Maximum in picofarads. The volts. To complete and Case height (mm) first two digits are the three-digit block, Codes table see the significant zeros precede the dimensions figures. The third voltage rating. A is the number of decimal point is zeros to follow. indicated by an R (6R3 = 6.3 V). Note Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. DIMENSIONS in inches millimeters Tantalum wire nib identifies anode (+) W terminal L MAX. D J J B REF. MAX. MAX. A H L D J CASE CODE SUFFIX H WA B MAX. REF. MAX. 16H 0.063 1.6 max. 0.280 0.126 0.012 0.051 0.012 0.173 0.024 0.236 0.004 C 7.1 3.2 0.3 1.3 0.3 4.4 0.6 6.0 0.1 20H 0.079 2.0 max. 0.063 1.6 max. 0.295 0.248 0.012 0.051 0.012 0.200 0.024 0.264 0.004 M 20H 7.5 6.3 0.3 1.3 0.3 5.1 0.6 6.7 0.1 0.079 2.0 max. 16H 0.063 1.6 max. 0.571 0.290 + 0.010 / - 0.020 0.051 0.016 0.469 0.024 0.520 0.004 X 14.5 7.37 + 0.25 / - 0.5 1.3 0.4 11.9 0.6 13.2 0.1 20H 0.079 2.0 max. Revision: 17-Jul-2018 Document Number: 40134 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 592W www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 6.3 V 8.2 V 10 V 330 C 2.0 470 C 1.6 C 2.0 680 750 M 2.0 1000 X 2.0 2200 X 1.6 STANDARD RATINGS MAX. DF MAX. ESR MAX. DCL CAPACITANCE CASE MAX. HEIGHT AT +25 C AT +25 C PART NUMBER AT +25 C (F) CODE 120 Hz 100 kHz (mm) (A) (%) ( ) 6.3 V AT +40 C, 4.0 V AT +85 C 2.5 V AT +125 C DC DC DC 470 C 592W477X06R3C2T16H 1.6 30 14 0.200 2200 X 592W228X06R3X2T16H 1.6 139 45 0.070 8.2 V AT +40 C 5.2 V AT +85 C, 3.3 V AT +125 C DC DC DC 470 C 592W477X08R2C2T20H 2.0 57 20 0.100 10 V AT +40 C 6.3 V AT +85 C, 4.0 V AT +125 C DC DC DC 330 C 592W337X0010C2T20H 2.0 33 20 0.100 750 M 592W757X0010M2T20H 2.0 75 35 0.100 1000 X 592W108X0010X2T20H 2.0 100 35 0.080 ELECTRICAL PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Category temperature range -55 C to +125 C (with voltage derating) Capacitance tolerance 20 %, 10 % (at 120 Hz) 2 V at +25 C using a capacitance bridge RMS Dissipation factor (at 120 Hz) Limits per Standard Ratings table. Tested via bridge method, at 25 C, 120 Hz ESR (100 kHz) Limits per Standard Ratings table. Tested via bridge method, at 25 C, 100 kHz After application of RV applied to capacitors for 5 min using a steady source of power with 1 k resistor in Leakage current series with the capacitor under test, leakage current at 25 C is not more than described in. Rated voltage - 55 C / + 40 C 10 V 8.2 V 6.3 V 4.0 V Operation temperatures Category voltage + 40 C / + 85 C 6.3 V 5.2 V 4.0 V 2.5 V Category voltage + 85 C / + 125 C 4 V 3.3 V 2.5 V 1.6 V VOLTAGE VS. TEMPERATURE RATING 120 Rated range 100 % 100 % 100 % Recommended 100 derating 80 80 % 80 % 80 % 63 % 60 40 % 50 % 40 592W recommended derating 33 % 20 0 0++4085+125 -55 TEMPERATURE (C) Revision: 17-Jul-2018 Document Number: 40134 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED VOLTAGE (%)