594D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR FEATURES Large capacitance rating range Lowest ESR for a surface mount tantalum chip Available capacitor Terminations: 100 % tin (2) standard, Available tin / lead available 8 mm, 12 mm tape and reel packaging Available available per EIA 481 and reeling per IEC 60286-3. Available 7 178 mm standard. 13 330 mm available. PERFORMANCE CHARACTERISTICS Case code compatibility with EIA 535BAAC and CECC 30801 www.vishay.com/doc 40194 All cases except R case are halogen-free Operating Temperature: -55 C to +125 C Material categorization: for definitions of compliance (above 85 C, voltage derating is required) please see www.vishay.com/doc 99912 Capacitance Range: 1.0 F to 1500 F Note Capacitance Tolerance: 10 %, 20 % standard * This datasheet provides information about parts that are Voltage Rating: 4 V to 50 V DC DC RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Equivalent Series Resistance: ESR readings measured at Please see the information / tables in this datasheet for details. 100 kHz, +25 C from 3500 m to 30 m ORDERING INFORMATION 594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE TERMINATION REEL SIZE AND TOLERANCE AT +85 C CODE PACKAGING This is X0 = 20 % This is expressed in V. See Ratings 2 = 100 % tin Tape and reel expressed in pF. X9 = 10 % To complete the three-digit and Case 4 = gold plated T = 7 178 mm reel The first two digits block, zeros precede the Code table 8 = solder plated W = 13 330 mm reel are the significant voltage rating. A decimal (60/40) figures. The third point is indicated by an R Special order is the number (6R3 = 6.3 V). of zeros to follow. Note Preferred tolerances and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. DIMENSIONS in inches millimeters Tantalum wire nib identifie s W anode (+) L terminal MAX. B D J J REF. MAX. MAX. A H CASE CODE L WH A BD J MAX. REF. MAX. 0.158 0.110 + 0.012 / - 0.016 0.075 + 0.012 / - 0.024 0.031 0.012 0.097 0.016 0.138 0.004 B 4.0 2.8 + 0.3 / - 0.4 1.9 + 0.3 / - 0.6 0.8 0.3 2.5 0.4 3.5 0.1 0.281 0.126 0.012 0.098 0.012 0.051 0.012 0.180 0.024 0.236 0.004 C 7.1 3.2 0.3 2.5 0.3 1.3 0.3 4.6 0.6 6.0 0.1 0.293 0.170 + 0.012 / - 0.024 0.110 0.012 0.051 0.012 0.180 0.024 0.253 0.004 D 7.4 4.3 + 0.3 / - 0.6 2.8 0.3 1.3 0.3 4.6 0.6 6.4 0.1 0.283 0.235 + 0.012 / - 0.024 0.136 + 0.012 / - 0.016 0.051 0.012 0.180 0.024 0.243 0.004 R 7.2 6.0 + 0.3 / - 0.6 3.5 + 0.3 / - 0.4 1.3 0.3 4.6 0.6 6.2 0.1 Note The anode termination (D less B) will be a minimum of 0.010 0.25 mm Revision: 08-Mar-16 Document Number: 40006 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 594D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 1.0 B 2.2 B 3.3 B 4.7 BBC 6.8 BC C / D 10 BB 15 B B C C / D R 22 BBB B / C C D / R 33 B B B / C D R 47 B B / C C / D D / R R 68 B B / C C / D D D / R 100 B B B / C C / D C / D R 120 C C R R 150 B / C C / D D D 180 D R 220 C / D C / D / R D / R 270 D 330 C C / D D / R R 390 R 470 C / R D / R R 680 D R R 1000 R 1500 R STANDARD RATINGS MAX. DF MAX. ESR MAX. RIPPLE MAX. DCL CAPACITANCE AT +25 C AT +25 C 100 kHz CASE CODE PART NUMBER AT +25 C (F) 120 Hz 100 kHz I RMS (A) (%) () (A) 4 V AT+85 C, 2.7 V AT +125 C DC DC 33 B 594D336(1)004B(2)(3) 1.30 6 0.380 0.47 100 B 594D107(1)004B(2)(3) 4.00 8 0.300 0.53 150 B 594D157(1)004B(2)(3) 6.00 8 0.250 0.58 150 C 594D157(1)004C(2)(3) 6.00 8 0.080 1.17 270 D 594D277(1)004D(2)(3) 10.80 8 0.060 1.58 330 C 594D337(1)004C(2)(3) 13.20 8 0.080 1.17 470 C 594D477(1)004C(2)(3) 18.80 10 0.075 1.21 470 R 594D477(1)004R(2)(3) 18.80 10 0.045 2.36 680 D 594D687(1)004D(2)(3) 27.20 12 0.060 1.58 1500 R 594D158(1)004R(2)(3) 60.00 20 0.030 2.89 6.3 V AT +85 C, 4 V AT +125 C DC DC 22 B 594D226(1)6R3B(2)(3) 1.40 6 0.380 0.47 68 B 594D686(1)6R3B(2)(3) 4.30 6 0.319 0.52 100 B 594D107(1)6R3B(2)(3) 6.30 8 0.250 0.58 Note Part number definitions: (1) Tolerance: for 10 % tolerance, specify X9 for 20 % tolerance, change to X0 (2) Termination: for 100 % tin specify 2, for gold plated specify 4, for solder plated 60/40 specify 8 (3) Packaging code: for 7 reels specify T, for 13 reels specify W. Revision: 08-Mar-16 Document Number: 40006 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000