597D476X9050Z8T Vishay

597D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors, TANTAMOUNT, Ultra-Low ESR, Conformal Coated, Maximum CV FEATURES New case size offerings Terminations: 100 % tin (2) standard tin / lead Available available Extremely low ESR Available Mounting: surface mount Ripple current up to 3.7 A 100 % surge current tested PERFORMANCE CHARACTERISTICS Material categorization: for definitions of compliance www.vishay.com/doc 40194 please see www.vishay.com/doc 99912 Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Note * This datasheet provides information about parts that are Capacitance Range: 10 F to 2200 F RoHS-compliant and / or parts that are non RoHS-compliant. For Capacitance Tolerance: 10 %, 20 % standard example, parts with lead (Pb) terminations are not RoHS-compliant. Voltage Rating: 4 V to 75 V DC DC Please see the information / tables in this datasheet for details Moisture Sensitivity Level 2a ORDERING INFORMATION 597D 687 X0 6R3 E 2 T TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE CODE TERMINATION REEL SIZE AND TOLERANCE AT +85 C PACKAGING This is expressed in pF. X0 = 20 % This is expressed in V. See Ratings 2 = 100 % tin T = tape and reel The first two digits are X9 = 10 % To complete the three-digit and Case 8 = solder plated 7 178 mm reel the significant figures. block, zeros precede the Codes table (60/40) The third is the number voltage rating. A decimal special order of zeros to follow. point is indicated by an R (6R3 = 6.3 V). Note Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting DIMENSIONS in inches millimeters Tantalum wire nib identifie s J anode (+) W terminal L D H B A CASE CODE L (MAX.) W H A B D (REF.) J (MAX.) 0.299 0.173 0.016 0.079 0.051 0.012 0.181 0.024 0.252 0.004 V 7.6 4.4 0.4 2.0 max. 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.173 0.016 0.138 0.051 0.012 0.181 0.024 0.252 0.004 D 7.6 4.4 0.4 3.5 max. 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.173 0.016 0.157 0.016 0.051 0.012 0.181 0.024 0.252 0.004 E 7.6 4.4 0.4 4.0 0.4 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.238 0.016 0.142 0.016 0.051 0.012 0.181 0.024 0.244 0.004 R 7.6 6.0 0.4 3.6 0.4 1.3 0.3 4.6 0.6 6.2 0.1 0.299 0.238 0.016 0.185 0.016 0.055 0.016 0.181 0.024 0.244 0.004 F 7.6 6.0 0.4 4.7 0.4 1.4 0.4 4.6 0.6 6.2 0.1 0.299 0.238 0.016 0.236 0.016 0.055 0.016 0.181 0.024 0.244 0.004 Z 7.6 6.0 0.4 6.0 0.4 1.4 0.4 4.6 0.6 6.2 0.1 0.315 0.260 + 0.016 / - 0.024 0.142 0.016 0.051 0.012 0.197 0.024 0.260 0.004 M 8.0 6.6 + 0.4 / - 0.6 3.6 0.4 1.3 0.3 5.0 0.6 6.6 0.1 0.315 0.260 + 0.016 / - 0.024 0.205 0.016 0.055 0.016 0.197 0.024 0.260 0.004 H 8.0 6.6 + 0.4 / - 0.6 5.2 0.4 1.4 0.4 5.0 0.6 6.6 0.1 Note The anode termination (D less B) will be a minimum of 0.012 0.3 mm Revision: 12-Jan-2021 Document Number: 40047 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 597D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 40 V 50 V 63 V 75 V 10 DR 15 E / R R R / F 22 RF Z / H 33 FH / Z 47 RH / Z 68 R F 100 F F / H H 150 F 220 E R M 330 V E F F / H 470 V E E H H 680 E E R H 1000 E / R R F 1500 R F 2200 R STANDARD RATINGS MAX. DF MAX. ESR MAX. RIPPLE MAX. DCL CAPACITANCE AT +25 C AT +25 C 100 kHz CASE CODE PART NUMBER AT +25 C (F) 120 Hz 100 kHz I RMS (A) (%) (m) (A) 4 V AT +85 C 2.7 V AT +125 C DC DC 470 V 597D477(1)004V(2)(3) 19 8 60 2.2 680 E 597D687(1)004E(2)(3) 27 6 25 2.9 1000 E 597D108(1)004E(2)(3) 40 8 20 3.3 1000 R 597D108(1)004R(2)(3) 40 8 18 3.7 1500 R 597D158(1)004R(2)(3) 60 8 24 2.9 2200 R 597D228(1)004R(2)(3) 88 30 35 2.7 6.3 V AT +85 C 4 V AT +125 C DC DC 330 V 597D337(1)6R3V(2)(3) 21 8 56 2.0 470 E 597D477(1)6R3E(2)(3) 30 6 30 2.7 680 E 597D687(1)6R3E(2)(3) 43 6 25 2.9 1000 R 597D108(1)6R3R(2)(3) 63 8 31 2.8 1500 F 597D158(1)6R3F(2)(3) 94 30 35 2.7 10 V AT +85 C 7 V AT +125 C DC DC 330 E 597D337(1)010E(2)(3) 33 6 35 2.5 470 E 597D477(1)010E(2)(3) 47 6 28 2.8 680 R 597D687(1)010R(2)(3) 68 6 28 3.0 1000 F 597D108(1)010F(2)(3) 100 20 120 1.4 16 V AT +85 C 10 V AT +125 C DC DC 220 E 597D227(1)016E(2)(3) 35 8 60 2.3 330 F 597D337(1)016F(2)(3) 53 10 100 1.6 470 H 597D477(1)016H(2)(3) 75 14 100 1.4 680 H 597D687(1)016H(2)(3) 100 20 80 1.8 Note Part number definitions: (1) Tolerance: for 10 % tolerance, specify X9, for 20 % tolerance, change to X0 (2) Termination: for 100 % tin specify 2, for solder plated 60/40 specify 8 (3) Packaging code: for 7 reels specify T Revision: 12-Jan-2021 Document Number: 40047 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000