678D108M010DM3D Vishay

678D www.vishay.com Vishay Sprague Aluminum Capacitors 105 C, Miniature, Radial Lead FEATURES Improved SMPS output capacitors Highest ripple current ratings per case size Available High CV Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA RIPPLE CURRENT MULTIPLIERS DESCRIPTION VALUE TEMPERATURE AMBIENT TEMPERATURE MULTIPLIERS Nominal case size 0.394 x 0.472 10.0 x 12.0 D x L in inches mm to 0.709 x 1.575 18.0 x 40.0 +105 C 1.0 Operating temperature -55 C to +105 C +85 C 2.2 Rated capacitance range, C 33 F to 6800 F R +75 C 2.7 Tolerance on C 20 % R +65 C 3.0 Rated voltage range, U 6.3 WV to 63 WV R DC DC FREQUENCY (Hz) 2 and 3 radial leads and axial WV 50 TO 60 100 TO 120 300 TO 400 1K TO 19K 20K TO 200K Termination DC mount. 6.3 to 63 0.60 0.70 0.75 0.82 1.0 4000 h ( 0.512 13.0 diameter): 3000 h (0.394 10.0 diameter): CAP 20 % (6.3 WV to DC LOW TEMPERATURE PERFORMANCE 25 WV ), DC Life validation test at 105 C 15 % (40 WV to 63 WV ) DC DC -55 C +25 C CAPACITANCE RATIO C / C MINIMUM AT 120 Hz from initial measurement. VOLTAGE MULTIPLIER ESR 1.3 x initial MAXIMUM specified limit. CAPACITANCE 6.3 V to 16 V 0.75 DCL 2 x initial specified limit. CHANGE 25 V to 63 V 0.85 1000 h: CAP 20 % VOLTAGE MULTIPLIER (6.3 WV to 25 WV ), MAXIMUM DC DC 15 % (40 WV to 63 WV ) IMPEDANCE 6.3 V to 16 V 2.0 DC DC Shelf life at 105 C from initial measurements. CHANGE 25 V to 63 V 1.5 ESR 1.3 x initial ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) specified limit. NOMINAL 0.394 0.512 0.630 0.709 I = 0.01 CV (2 min charge time) DIAMETER 10.0 13.0 16.0 18.0 DC leakage current I = 0.03 CV (1 min charge time) I in A, C in F, V in Volts TYPICAL ESL (nH) 4.0 7.0 10.0 12.0 Revision: 18-Jul-16 Document Number: 42055 1 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 678D www.vishay.com Vishay Sprague BULK SPECIFICATIONS in millimeters TERMINAL CODE C TERMINAL CODE D 9.5 min. 20 min. S S L L W W + + D D - - 15 min. Sleeve Sleeve 7.1 min. (1) (2) TERMINAL CODE J TERMINAL CODE O 9.5 1.6 25 min. 25 min. S L S L W W T + + NC D D - NC - 5.0 1.6 25 min. Sleeve Sleeve Third lead may fall within 20 of C L 7.1 1.6 Notes + Positive terminal - Negative terminal NC No charge potential (1) Available for 12.5 mm, 16 mm, and 18 mm diameter units (2) Available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal DIMENSIONS in inches millimeters NOMINAL STYLES 2 AND 4 STYLES 3 AND 5 LEAD SPACING LEAD DIAMETER CASE S 0.024 T 0.020 CODE D L D (max.) L (max.) D (max.) L (max.) NOMINAL AWG 0.60 0.50 CC 0.394 10.0 0.512 13.0 0.413 10.5 0.563 14.3 0.413 10.5 0.630 16.0 0.197 5.0 n/a 0.025 0.63 22 CD 0.394 10.0 0.630 16.0 0.413 10.5 0.669 17.0 0.413 10.5 0.740 18.8 0.197 5.0 n/a 0.025 0.63 22 CG 0.394 10.0 0.787 20.0 0.413 10.5 0.846 21.5 0.413 10.5 0.906 23.0 0.197 5.0 n/a 0.025 0.63 22 DG 0.492 12.5 0.787 20.0 0.512 13.0 0.846 21.5 0.512 13.0 0.906 23.0 0.197 5.0 0.098 2.5 0.032 0.81 20 DK 0.492 12.5 0.984 25.0 0.512 13.0 1.043 26.5 0.512 13.0 1.142 29.0 0.197 5.0 0.098 2.5 0.032 0.81 20 DM 0.492 12.5 1.043 26.5 0.512 13.0 1.102 28.0 0.512 13.0 1.161 29.5 0.197 5.0 0.098 2.5 0.032 0.81 20 DT 0.492 12.5 1.319 33.5 0.512 13.0 1.346 34.2 0.512 13.0 1.417 36.0 0.197 5.0 0.098 2.5 0.032 0.81 20 DS 0.492 12.5 1.673 42.5 0.512 13.0 1.720 43.7 0.512 13.0 1.791 45.5 0.197 5.0 0.098 2.5 0.032 0.81 20 EK 0.630 16.0 0.984 25.0 0.650 16.5 1.031 26.2 0.650 16.5 1.098 27.9 0.295 7.5 0.150 3.8 0.032 0.81 20 EN 0.630 16.0 1.260 32.0 0.650 16.5 1.319 33.5 0.650 16.5 1.417 36.0 0.295 7.5 0.150 3.8 0.032 0.81 20 ER 0.630 16.0 1.417 36.0 0.650 16.5 1.476 37.5 0.650 16.5 1.575 40.0 0.295 7.5 0.150 3.8 0.032 0.81 20 EU 0.630 16.0 1.575 40.0 0.650 16.5 1.642 41.7 0.650 16.5 1.669 42.4 0.295 7.5 0.150 3.8 0.032 0.81 20 FR 0.709 18.0 1.417 36.0 0.728 18.5 1.476 37.5 0.728 18.5 1.575 40.0 0.295 7.5 0.150 3.8 0.032 0.81 20 FV 0.709 18.0 1.575 40.0 0.728 18.5 1.653 42.0 0.728 18.5 1.693 43.0 0.295 7.5 0.150 3.8 0.032 0.81 20 Revision: 18-Jul-16 Document Number: 42055 2 For technical questions, contact: aluminumcaps4 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000