End of Life January-2018 - Alternative Device: 6N135, 6N136 6N1135, 6N1136 www.vishay.com Vishay Semiconductors High Speed Optocoupler, 1 MBd, Photodiode with Transistor Output, 110 C Rated FEATURES NC 1 8 C (V ) CC Operating temperature from -55 C to +110 C A 2 7 B (V ) B Isolation test voltages: 5300 V RMS C 3 6 C (VO) TTL compatible NC 4 5 E (GND) High bit rates: 1 MBd i179081 3 i179081 V Bandwidth 2 MHz DE Open-collector output DESCRIPTION External base wiring possible The 6N1135 and 6N1136 are 110 C rated optocouplers Material categorization: for definitions of compliance with a GaAIAs infrared emitting diode, optically coupled with please see www.vishay.com/doc 99912 an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic AGENCY APPROVALS package. UL1577 (pending) Signals can be transmitted between two electrically DIN EN 60747-5-5 (VDE 0884) (pending) separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not cUL (pending) exceed the maximum permissible reference voltages. CQC (pending) ORDERING INFORMATION DIP-8 Option 6 6 N 11 3 - X 0 0 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE AND Option 9 REEL > 0.1 mm AGENCY CERTIFIED/PACKAGE CTR (%) UL 7 19 DIP-8 6N1135 6N1136 DIP-8, 400 mil, option 6 6N1135-X006 6N1136-X006 SMD-8, option 9 6N1135-X009T 6N1136-X009T ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 5V R Forward current I 25 mA F Peak forward current t = 1 ms, duty cycle 50 % I 50 mA FM Maximum surge forward current t 1 s, 300 pulses/s I 1A FSM Thermal resistance R 700 K/W th Power dissipation T = 70 C P 45 mW amb diss OUTPUT Supply voltage V -0.5 to 15 V CC Output voltage V -0.5 to 15 V O Emitter base voltage V 5V EBO Output current I 8mA O Maximum Output current 16 mA Rev. 1.9, 13-Nov-12 Document Number: 83909 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life January-2018 - Alternative Device: 6N135, 6N136 6N1135, 6N1136 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT OUTPUT Base current I 5mA B Thermal resistance 300 K/W Power dissipation T = 70 C P 100 mW amb diss COUPLER Isolation test voltage (between emitter and detector climate per t = 1 min V 5300 V ISO RMS DIN 50014 part 2, Nov. 74) Storage temperature range T -55 to +150 C stg Ambient temperature range T -55 to +100 C amb Max. 10 s, dip soldering (1) Soldering temperature T 260 C sld 0.5 mm from case bottom Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 1.6 mA V -1.6 1.9 V F F Breakdown voltage I = 10 A V 5- - V R BR Reverse current V = 5 V I - 0.5 10 A R R Capacitance V = 0 V, f = 1 MHz C - 125 - pF R I Temperature coefficient, I = 1.6 mA V /T -- 1.7 - mV/C F F A forward voltage OUTPUT I = 1.6 mA, V = open, F O Logic low supply current I - 150 - A CCL V = 15 V CC I = 0 mA, V = open, F O Logic high supply current I -0.01 1 A CCH V = 15 V CC I = 16 mA, V = 4.5 V, F CC 6N1135 V -0.1 0.4 V OL I = 1.1 mA, O Output voltage, output low I = 16 mA, V = 4.5 V, F CC 6N1136 V -0.1 0.4 V OL I = 2.4 mA O I = 0 mA, V = V = 5.5 V I - 3 500 nA F O CC OH Output current, output high I = 0 mA, V = V = 15 V I -0.01 1 A F O CC OH COUPLER Capacitance (input to output) f = 1 MHz C - 0.6 - pF IO Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 6N1135 CTR 7 16 - % I = 16 mA, V = 0.4 V, F O V = 4.5 V CC 6N1136 CTR 19 35 - % Current transfer ratio 6N1135 CTR 5 - - % I = 16 mA, V = 0.5 V, F O V = 4.5 V CC 6N1136 CTR 15 - - % Rev. 1.9, 13-Nov-12 Document Number: 83909 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000